User Guide

Module: Programmer
59
Setup menu
Stick.down and stick.up in the usual fashion to
scroll through the various menu options.
The four sounds in the setup are displayed side by
side for every menu option (with the exception of the
surround parameters). The cursor < indicates which
sound you are currently editing with the knob. The
name of this sound also appears in the first line of
the display.
Example: Volume settings for the four sounds in the
setup. The same level (30) is set for each sound. The
cursor points to sound 2.
Stick.left and stick.right to scroll among the
sounds within a menu option.
The setup menu is a matrix: If, for example, the
cursor points to sound 2 and you stick.up/down to
scroll to the next/previous menu option, the cursor
remains in place; that is, it continues to point to
sound 2.
The menu diagrams on the following pages show the
default settings of the individual setup parameters.
All parameters are described in table 5 on page 61.
Snd 2 SetUp_n
5 2 10 19<
Snd 2 SetUp_na
5210<0
Button
Continued on next page ...
SetUp No.
SetUp_name
Setup
Vol 1 Soundname
127< 127 127 127
Snd 1 Soundname
5< 0 0 0
Snd 2 Soundname
52<00
Vol 2
Vol 3
Vol 4
Transp 1 Soundname
0< 0 0 0
Transp 2
Transp 3
Transp 4
Detune 1 Soundname
0< 0 0 0
Detune 2
Detune 3
Detune 4
MIDI 1 Soundname
1< 2 3 4
MIDI 2
MIDI 3
MIDI 4
Local 1 Soundname
On<OnOnOn
Local 2
Local 3
Local 4
Out 1 Soundname
ST1< ST1 ST1 ST1
Out 2
Out 3
Out 4
Pan 1 Soundname
0< 0 0 0
Out 2
Out 3
Out 4
Button Sound 4Sound 2 Sound 3Sound 1
Neuron.book Seite 59 Montag, 23. Dezember 2002 2:28 14