User Guide

58
Module: Programmer
Programmer: Programming setups
Before we dive right into programming, look at the following chart. It recaps basic information on the topic of
"Operating mode: Setup mode" starting on page 32.
You can combine up to four sounds in setup mode. In stereo mode, sounds can
be routed freely to the three stereo outputs (along with the „wet“ or effects
signal).
In surround mode, L/R stereo master effects are routed to the front L/R and
back L/R outs, while the center channel and sub remain "dry." Sounds can be
positioned freely in the surround field via stick controller or on the fly in the
soundscape via stick animation.
Neuron.book Seite 58 Montag, 23. Dezember 2002 2:28 14