User Guide

Module: Programmer

• Stick.right to access the "Where" selection list.

Select the destination within the current sound

via knob; in our example this is resynator 2.

• Press enter. All data is copied from resynator 1

to resynator 2 within the current sound.

Then you can copy the same source data to another

destination (if possible) using the knob or

stick.left to return to the "What" selection list.

Back to the roots: The reset function

The copy/paste menu boasts a special feature called

reset (see page 54). It lets you set selected data

records back to their default settings.

The reset selection list offers the same data records

as the copy selection list.

• Press copy/paste in programmer. The copy/

paste menu’s most recently edited option

appears in the display.

• Stick.down to access the reset function. The

selection list appears in line 2. Select the

desired data record using the knob.

• Press enter. The values of the selected data

record are reset. In the case of stick recordings,

all corresponding tracks are erased.

Then you can reset another data record

immediately using the knob or stick.up to go to

the copy function.

You can also use the enter button to reset just the

current parameter rather than entire parameter sets

to the default setting.

Neuron.book Seite 57 Montag, 23. Dezember 2002 2:28 14