User Guide

56
Module: Programmer
• Twist the knob to select the desired source
data:
• Press enter. All resynator 1 source data is
copied from sound 010 into resynator 1 of the
current sound.
Then you can immediately copy another data
record using the knob or stick.left to select
another source sound.
Copying within a sound
You have two selection lists offering options for
copying within a sound. The "What" list (see menu
diagram) offers resynator data, shaper and controller
settings, etc. It is followed by the "Where" list,
which lets you select the destination. "Where" offers
only those destinations that are meaningful in
connection with the previously selected data.
Example: How to copy data in the current
sound from resynator 1 to resynator 2
In the following example, we will copy resynator 1’s
current settings to resynator 2 within sound 010.
• Press copy/paste in programmer. The copy/
paste menu’s most recently edited option
appears in the display. If necessary, scroll to
the copy within menu option.
Twist the knob to select data to be copied from
the „What“ list.
Current settings are always copied when copying
data within a sound irrespective of whether or not
the settings have been stored.
Neuron.book Seite 56 Montag, 23. Dezember 2002 2:28 14