User Guide

Module: Programmer
55
Copying from one sound to another
When copying from one sound to another, data is
always copied from the selected source sound to the
currently loaded sound.
The selection list offers data/parameter sets from all
modules whose settings are stored at the sound
level. This includes:
• Resynators’ model parameter values or the
complete resynator configuration,
• envelope parameters of all shapers,
• mod, blender, and slicer settings,
• the silver module’s effect parameters,
• master effects settings,
• aftertouch settings,
• free controller assignments,
• the resynators’ and the silver module’s stick
recordings.
Example: How to copy parameter values
from one sound to another
In the following example, we will copy the resynator
1 settings of sound 010 to sound 032.
• Prerequisite: Sound 010 is programmed and
stored. The current sound is sound 032.
• Press copy/paste in programmer. The copy/
paste menu’s most recently edited option
appears in the display.
• Twist the knob to dial in number 10 because
that sound is where we want to copy data from.
• Stick.right to access the list of data that can
be copied:
If the source and destination numbers are identical,
Neuron loads data stored in the sound database,
overwriting the current settings. This lets you
cancel changes that have not been stored.
Neuron.book Seite 55 Montag, 23. Dezember 2002 2:28 14