User Guide

54
Module: Programmer
snapshots and load the desired shot by pressing the
knob. Neuron exits compare mode automatically
(LED extinguishes) and the current sound setting
data is overwritten by the stored snapshot data.
If while comparing sounds you decide to cancel all
changes and continue working with the initial
sound, simply load this sound again from the sound
database (see page 50). All snapshots are erased
when you do this.
Neuron’s copy/paste function
Copy and paste lets you copy data to other sounds or
other modules within the current sound.
Press the programmer copy/paste button to enable
the copy function. Here is its menu structure:
Make a habit of shooting an up-to-date snapshot
before loading an earlier snapshot to avoid losing
the fruits of your labors!
Copy/paste mode is ended automatically when you
change a parameter in any module. If you exit the
copy/paste menu by pressing the copy/paste
button again, Neuron jumps to the most recently
edited menu. In both cases, the device recalls the
most recently edited copy/paste menu option and
displays it immediately when you access the copy/
paste menu again.
CopyFromSound No.
Soundname
1) Selection list: data to be copied (from one sound to another)
Enter starts the copy/reset operation.
4) Selection list: data to be reset to default values.
What To Copy
Data selection
1)
Reset to default
Data selection
4)
Select options by twisting the knob.
CopyWithin What
Data selection
2)
3) Selection list: "Where" = destination (within a sound).
CopyWithin Where
Target selection
3)
2) Selection list: "What" = data to be copied (within a sound).
Neuron.book Seite 54 Montag, 23. Dezember 2002 2:28 14