User Guide

42
Fundamentals: Basic settings
Footswitch Defines the type of footswitch connected to the pedal/switch port (see page 11).
Normally, Neuron identifies the connected switch on its own. If it fails to do this, you can enter the type
using this parameter.
Your options are open and close. MIDI controller number: 66.
SustainPed Defines the type of footswitch connected to the pedal/sustain port (see page 11).
Normally, Neuron identifies the connected switch on its own. If it fails to do this, you can enter the type
using this parameter.
Your options are open and close. MIDI controller number: 64.
Switch Off Determines how Neuron powers down.
Options: Ask (Neuron's query must be confirmed with enter; exit cancels the operation) or quick (no
query). We recommend that you stick with the default setting, ask!
To learn more about this, read the section "Switching off" starting on page 15.
Software:
Version
Indicates the software version that Neuron is currently running.
Compare version numbers to find out if an update for your Neuron is ready and waiting on the Hartmann
home page (www.hartmann-music.com)!
Calibration? Serves to calibrate all stick controllers and keyboard aftertouch. After you have pressed enter, another
prompt appears - Calib: Move sticks or press aftertouch – that lets you start calibrating.
Good-to-know background stuff: The sticks can be calibrated to compensate for mechanical
manufacturing tolerances. The process of calibration adjusts the stick’s range of travel to match the value
range it is designed to cover.
To learn how to calibrate sticks and aftertouch, refer to page 26.
Table 1: Basic settings (cont.)
Neuron.book Seite 42 Montag, 23. Dezember 2002 2:28 14