User Guide

14
Powering up (finally!)
Let the games begin...
Set up your gear as follows: Connect stereo output 1
(L/R) to the inputs of your mixer or audio interface.
For purposes of MIDI control, connect the MIDI In/
Out ports in the standard manner used for other
synthesizers.
To learn more about Neuron’s connections and
interfaces, see page 8.
Powering up (finally!)
The on/off switch is the Hartmann logo located at
the rear of the housing.
While the Neuron is booting (that is, loading all data
required for operation), the main display reads
Then Neuron’s software is initialized.
When Neuron comes on line, it is in sound mode with
sound 0 loaded.
The switch lights up continuously when Neuron is up
and running.
This launching process can take some time.
Neuron.book Seite 14 Montag, 23. Dezember 2002 2:28 14