User Guide

190
The load/dump function
• After Neuron has copied the update from the
software folder, the following message appears:
After some three seconds, the new software
version is initialized and started.
Then Neuron deletes the data in the
ToNeuron/Software directory.
How to load models (sounds and setups)
The following walks you through the procedure for
loading models. Proceed accordingly to load sounds
and setups. Note that data must be stored in the
corresponding
ToNeuron subdirectory!
• Copy the desired models from a connected
computer into the ftp directory
ToNeuron/
Models
on Neuron’s hard disc (see
page 187).
• Press the load/dump button.
• Twist the knob to select the models option for
the menu item load:
• Press enter.
Neuron loads the models into the model
database and indicates the copying operation
in the display. Existing models archived under
the same numbers are overwritten!
After Neuron has copied the models, the display
reads
Done .
Then Neuron deletes the data in the
ToNeuron/Models directory.
How to dump data
The following takes you through the procedure for
exporting the current sound including models
therein. Proceed accordingly to dump all models,
sounds and setups.
• Switch Neuron to sound mode (we want to
dump the current sound).
• Press the load/dump button.
• Twist the knob to select the Current option for
the menu item Dump:
• Press enter.
• Neuron exports the current sound into the ftp
subdirectory
FromNeuron/Sounds and
Neuron.book Seite 190 Montag, 23. Dezember 2002 2:28 14