User Guide

Digital inputs/outputs, USB connection

For example, you could use a suitable coaxial cable (75 ohms, RCA connectors) to connect Neuron to a hard disk

recording system, DAT recorder, or digital mixer. Note that the content of the digital signal sent via this port is identical

to the analog signal routed out via stereo output 1.

USB: Standard USB interface for connecting a PC/MAC (via USB network adapter!). For details, see page 185.

Digital In/Out: Digital audio input and output. Designed for loss-free audio

data transfer, these are S/PDIF channels in coaxial format with a fixed

sampling rate of 44.1 KHz (24 bits). The serial transfer format consists of

the actual audio data as well as various other info and status bits, some of

which enable copy protection.

Neuron.book Seite 13 Montag, 23. Dezember 2002 2:28 14