User Guide

180
SysEx commands (System exclusive data)
A SysEx data transfer lets you upload and download
data to and from Neuron that are not addressed by
any other MIDI command, for example, complete
sounds or setups (see the following sections).
How to send SysEx data
A SysEx dump is launched in the
load/dump menu. Open the menu
by pressing the programmer load/
dump button.
You will find the
dump SysEx
item below the ftp load/dump
options. Twist the knob to
determine which data you want to
dump.
You have the following options:
• Current: When you choose this option in sound
mode, Neuron sends the currently loaded sound
to the MIDI out; in setup mode, it sends the
currently loaded setup to the MIDI out. The
models and sounds used therein are also
exported.
• All Sounds: All stored sounds are sent to the
MIDI out. Models contained therein are not
exported.
• All SetUps: All stored setups are sent to the
MIDI out. Sounds and models contained therein
are not exported.
Example: The following example takes you through a
SysEx dump of all setups. Proceed accordingly to
dump other SysEx data.
• Ensure that the MIDI device connected to
Neuron’s MIDI out port is ready to receive MIDI
data.
• Check if Neuron’s device identification
(SysExDeviceID) is set correctly in the basic
settings (see page 179).
• Press the load/dump button. Stick.down to
scroll to the menu option
• Twist the knob to select the option
• Press enter.
Neuron sends the parameters of all setups to
the MIDI out interface.
In addition to SysEx loading/dumping, Neuron
enables ftp loading/dumping. For more on this see
the topic "Updates and Backups" starting on page
185.
Load/
Load
Dump
Dump FTP
Dump SysEx
Neuron.book Seite 180 Montag, 23. Dezember 2002 2:28 14