User Guide

Surround handling in Neuron
177
How to record a stick movement
A new recording overwrites a previous track without
warning!
• In the silver module, press the record stick
button in order to switch the recording
function to standby. The LED above the button
flashes.
• After the device starts recording a track (as
defined by the basic settings parameter stick
record start) the LED lights up continuously.
Every movement of the stick controller is then
recorded.
• Stop recording by pressing the record stick
button again. The recorded track is stored along
with the other setup-specific data when the
setup is stored.
In order to delete a recording without overwriting
it with a new track, press and hold the record stick
button until the LED extinguishes (three seconds
should do).
How to start a stick animation
A stick animation within a setup is determined
individually for each sound. To this end, the surround
menu offers a parameter called surround stk ani for
each sound.
• Press the surround or setup button to access
the menu. (The surround menu is part of the
setup menu - see page 174).
• If necessary, stick.down to scroll to
• Twist the knob to choose one of the options,
off, 1shot or repeat (see page 63).
• Stick.right the navigation stick to access the
animation settings for sounds 2, 3 and 4.
Surround settings are stored for each sound with the
setup.
Neuron.book Seite 177 Montag, 23. Dezember 2002 2:28 14