User Guide

164
Free controllers
How to select a destination
The controller menu lists potential destinations in
groups (as shown in the following lists). A group is
indicated by a '>' symbol following its name.
• Use the navigation stick to scroll to the desired
controller.
• Twist the knob to select the desired group.
• Stick.right to open the group.
• Select the destination using the knob.
• Stick.left to exit a group.
Example: Say you want to define slicer rate as
destination 3 for control 2:
• Press the controller button.
• Stick.down to scroll to control 2.
• Stick.right to select destination 3.
• Twist the knob (to the right) to select the group
of slicer destinations.
• Stick.right to access the first destination
(slicer depth) in this group.
• Select our desired destination rate via knob.
• Stick.right to access the corresponding depth
parameter directly and define as usual using the
knob.
• Stick.left repeatedly to return to the selection
list for destination numbers.
Neuron.book Seite 164 Montag, 23. Dezember 2002 2:28 14