User Guide

External controllers: Footswitches and pedals

Control 4:You can connect a continuous controller of any type and

polarity here. In the controller menu, you can define up to four functions

for the pedal (see page 165).

In the default setting, control 4 adjusts the volume of both resynators.

MIDI controller number: 11 ("expression").

Neuron automatically identifies the type of connected footswitch and sustain pedal when it is powered up. If this is

not the case, you can provide that information to Neuron via the basic settings parameters footswitch and sustain ped

Switch: Port designed to take a footswitch of any type (opener or

closer) and polarity. You can define functions for the switch in the

controller menu (see page 167).

MIDI controller number: 66.

Sustain: Connect a standard sustain pedal here.

MIDI controller number: 64.

Neuron.book Seite 11 Montag, 23. Dezember 2002 2:28 14