User Guide

Module: Master effects
157
Back to the synthesizer world: The reverb effect
simulates the acoustic properties of a room. A dry
signal without any reflections sounds unnatural. For
reasons of budget, venue and time we do not always
have the pleasure of playing in a concert hall or
acoustically commensurate room, so we lay the
desired type of reverb (type parameter, see
page 159) over the signal.
Master effects: Control features
On/Off
button
Switch the master effects on/off. Note in this
context the two mix parameters for delay and
reverb (page 159)!
Delay
button
Switches the delay effect on/off. Note in this
context the mix parameter (page 159).
Tap
button
Neuron measures the time (in ms) that
elapses between the last two taps and uses
this value to compute tempo. In other words,
press the button repeatedly while locked into
the groove of the song and the delay time
will be in sync. Whether or not you are locked
into the band’s groove of course depends
entirely on you ...
You can then adjust L time and R time
independently via menu.
Table 22: Control features of the master effects
Reverb
button
Switches the reverb effect on/off. Note in
this context the mix parameter (page 159).
Menu
button
Activates the most recently edited menu
option or - if you are already working in the
master effects menu - the top level of the
menu.
Shaper 3:
Delay,
reverb
wheels
If shaper 3 is in efx mix status, you can
define both mix parameters conveniently
using the shaper wheels.
Table 22: Control features of the master effects
Neuron.book Seite 157 Montag, 23. Dezember 2002 2:28 14