User Guide

10
Stereo setup, surround setup, headphones
Stereo setup, surround setup, headphones
Outputs: 3x Stereo L, R or Surround Front, Back, Center/Sub:
• Mono: Use the right channel of stereo output 1.
• Stereo: Effects are routed through stereo output 1 only; outputs
2 and 3 remain dry. You can patch every sound of any setup to one
of the three stereo outputs (out setup parameter), including the
volume and pan settings for that sound. See table 5 on page 61.
• Surround: Stereo output 1 carries the signals for the front
channels (L, R) and stereo output 2 carries the signals for the two
back channels. In surround mode, the center channel signal is
routed via output 3 left; output 3 right sends a signal destined for
the subwoofer.
The setup menu also contains sound-related parameters for the
surround channels (table 5 on page 61).
Headphones: Class A stereo headphones output. In surround mode,
you will hear the two front channels in your headphones.
The volume of all analog audio outputs and the headphones output is controlled via the master volume knob.
Whenever you work with headphones, be sure to check the volume before you strike any keys!
Neuron.book Seite 10 Montag, 23. Dezember 2002 2:28 14