User Guide

Module: Shaper 3
153
Shaper 3: Handling
How to use a filter envelope
• Shaper 3 must be activated in the silver’s filter
unit to allow the filter envelope to influence
the filter curve.
Press (repeatedly if necessary) the silver
parameter level button so that the filter LED
lights up.
Then press contour contr. until the shaper 3
LED lights up.
• Press the shaper status button until the silver
LED lights up.
Status Silver appears in the
main display.
• Stick.down the navigation stick to access the
menu option env mode, which lets you select
the envelope mode (normal or repeat).
• Adjust ADSR parameter values by turning the
wheels. Once you move a wheel, you can also
define the given value in the main display using
the knob.
Alternatively, you can navigate via stick.right/
left back and forth among individual envelope
parameters.
• Define the intensity of the envelope’s effect on
the filter by twisting the depth knob
(alternatively using the menu option env depth
in the shaper 3 menu).
• If you want to modulate the depth of the
envelope via velocity, define the parameter velo
depth (see page 152).
Neuron.book Seite 153 Montag, 23. Dezember 2002 2:28 14