User Guide

Module: Shaper 3
151
Shaper 3: Control features
Shaper 3: Menu
The following illustration shows the menu for the
shaper status silver. The parameters of these menus
are summarized in Table 21.
Wheels
A/ D / S / R
Input wheels for the envelope
parameters. The LED bar display
indicates the parameter value. The more
LEDs light up, the longer the defined
time or, in the case of a level, the higher
the level.
When you move a wheel, the current
parameter also appears in numeric form
in the main display and can be edited
using the knob.
Depth knob Determines the intensity of the
envelope’s influence on the filter. Depth
is also adjustable via menu.
Status button Determines which parameters are
adjusted via wheels:
• Silver: The displayed parameters define
the filter envelope, which in turn
determines the sweep of the filter
cutoff frequency.
• Efx mix: The delay and reverb wheels
adjust the mix of the two master
effects, respectively. S and R are
inactive in this case.
...Continued on next page
Table 20: Control features: Shaper 3
Good-to-know stuff:The shaper status
button has no influence on whether or
not parameters are active. It serves only
to select the desired parameters so that
they can be manipulated using the
wheels (or via the depth knob in silver
status).
The filter envelope is activated at the
silver module’s filter level via the
contour contr. button.
Table 20: Control features: Shaper 3 (cont.)
Sc
Env Release
Sc
Env Sustn
Shaper 3
Env Mode
Env Decay
Shaper 3
Env Attack
Shaper 1/2
Status Silver
Shaper3: Wheel A
Wheel D
Wheel S
Wheel R
Shaper 3
Env depth
Shaper 3:
Depth
Shaper 3 Status
: Silver
Shaper 3
VeloDepth
Neuron.book Seite 151 Montag, 23. Dezember 2002 2:28 14