User Guide

Module: Shaper 3
149
Module: Shaper 3
A filter earns the descriptive modifier "dynamic" if
its parameters can steadily accept new values and
this modulation of values can also b e automated. For
example, say you want all frequencies to initially
pass whenever a key is pressed, but a little time later
just the low frequencies to be allowed through.
In Neuron, you can do this by modulating the cutoff
frequency of the defined filter via shaper 3’s
envelope generator.
Another dynamic modulation option is to change the
filter’s cutoff frequency by moving the stick
controller or playing back a stick animation (see
page 148).
Shaper 3 offers an ADSR envelope that is "hard-
wired" to the silver’s filter unit.
Please note that the status silver must be enabled
before you can define the envelope in shaper 3.
When the shaper status efx mix is enabled, the
wheels are used to determine the mix values of the
master effects reverb and delay.
Shaper 3 must be activated in silver via contour
control so that the envelope can modulate the
selected silver filter (see page 135).
In the section
"Dynamic filtering
via envelope, stick,
LFO and velocity"
starting on page
127 you read about
how Neuron’s filters
can be made to
sweep dynamically.
Neuron.book Seite 149 Montag, 23. Dezember 2002 2:28 14