User Guide

148
Module: Silver
• Twist the knob next to the main display to dial
in the desired effect. For our example, we will
choose "Sp_warp":
• Press the silver parameter
level button repeatedly so that
the freq FX LED lights up.
• You can move the stick to edit
the two most important
parameters of the selected
effect. In our example using
"Sp_warp," these are
mix and
frequency .
You can adjust the two parameters using the
knob next to the main display. The first
parameter that you just edited via stick appears
in the main display:
• To define the remaining effect parameters,
stick.right to scroll to the effect’s remaining
menu options, whose values you can adjust via
knob (see the menu diagrams starting on
page 136).
• Stick.left returns you to the freq FX
type
selection list. Stick.up to go from there to the
filter settings and stick.down to the time-
based effects.
Stick recording and animation in the silver
Remember the rules on recording resynator stick
movements? The same applies to the silver stick. The
procedure for recording and playing animations is
also identical.
The only difference is that the silver module’s
parameter levels do not contain scape and sphere
parameters. Instead, a filter is defined on level 1,
level 2 contains a freq effect, and level 3 offers the
parameters for the selected time FX. The silver menu
gives you the option of playing back (one track per
level) stick animations once (1shot) or repeatedly
(repeat).
For details on recording and playing stick
animations, please read the section starting on
page 89.
Neuron.book Seite 148 Montag, 23. Dezember 2002 2:28 14