User Guide

Module: Silver
147
• Press the silver parameter
level button repeatedly so
that the filter LED lights up.
• Move the stick controller to
edit the cutoff frequency
and resonance.
The two parameters can also
be defined in the main display using the knob.
The cutoff frequency that you just edited via
stick appears in the main display:
• Stick.right/left to scroll among the different
menu options for resonance, the depths of the
modulation options available via LFO
oscillation and velocity as well as the key
tracking setting.
Set each parameter to the desired value using
the knob. The individual parameters are
described on page 138.
• Stick.left to return to the filter type selection
menu. Stick.down from there to access effects.
How to select/define an effect
If you are having problems navigating the menu,
check out the diagrams starting on page 136. They
will show you the way!
A frequency effect serves as the example in the
following description. Proceed accordingly for time-
based effects. The
time FX menu option is
located directly below
freq FX .
Bear in mind that only one frequency effect and one
time-based effect can be active at any given time!
• Switch silver on (on/off button).
• Switch the freq effect group on so that you can
hear the effects of parameter changes
immediately while editing (freq FX button).
• Stick.right (using the navigation stick next to
the main display) to scroll to the effects
selection list.
Neuron.book Seite 147 Montag, 23. Dezember 2002 2:28 14