User Guide

Module: Silver
143
Feedback
(Stereo
spread)
Defines the level of the delayed signal
routed back from the delay line’s output
to its input, thus determining the
number of repetitions.
Value range: -64 to +63.
Mix
(LR delay)
Determines the amount of wet signal in
the effect’s output signal (the mix of the
original signal and the delayed signal).
Value range: 0 to 127.
Time
(LR delay)
Determines delay time. The value applies
to both stereo channels.
Value range: 0 to 1000 (ms).
Feedback
(LR delay)
Defines the amount of delayed signal
routed back to the effect input via
feedback loop. The higher the value, the
higher the number of repetitions.
Value range: -64 to 63.
Mix
(Flanger)
Defines the amount of delayed signal
added to the original signal, thus
determining the output signal’s wet/dry
mix.
Value range: 0 to 127.
Feedback
(Flanger)
Defines the amount of signal routed back
to the effect’s input via feedback loop.
Value range: -64 to 63.
Table 19: Silver: Time FX parameters (cont.)
Depth
(Flanger)
Determines the LFO oscillation’s
modulation depth. The higher the value,
the stronger the flanging effect.
Value range: 0 to 127.
Speed
(Flanger)
Defines the frequency of the modulating
LFO oscillation. The higher the LFO
frequency, the faster the frequency
cancellations are repeated and the faster
the effect changes.
Value range: 0.0 to 20.0 Hz in 0.1 Hz
steps.
Wave
(Flanger)
Determines the waveform of the
modulating LFO oscillation. The same
waveforms are available as in the mod
menu. You will find a list of all available
waveforms on page 118.
Table 19: Silver: Time FX parameters (cont.)
Neuron.book Seite 143 Montag, 23. Dezember 2002 2:28 14