User Guide

122
Module: Slicer
Slicer: Menu
You can access the
slicer menu at
three points via
the control
features indicated
in the illustration.
Select the slicer
type by pressing
the on/off button
repeatedly.
Slicer: Parameters
Slicer
Type
Slicer
Depth / Spread
Slicer
Rate
Slicer
Wave
On/Off
Depth / spread
Rate
Depth /
Spread
In vertical mode: Depth = intensity of the
Slicer’s effect on the resynators’ output signal.
In 3D Mode: Spread = spread of the effect in
the 3D soundscape.
Value range: 0 to 127.
Rate Frequency of the slicer oscillation.
Value range: 0.0 to 20.0 Hz (in 0.1 Hz steps).
Wave Waveform of the modulating oscillation. Slicer
offers the same waveforms as the mod LFO
generator. You will find a list of all available
LFO waveforms on page 118.
Table 15: Slicer parameters
Neuron.book Seite 122 Montag, 23. Dezember 2002 2:28 14