User Guide

112
Module: Shaper 1/2
Example: Say you want shaper 1’s ADSR
envelope to modulate resynator 1’s pitch. Press
the menu button in resynator 1 and use the
navigation stick located next to the main
display to scroll to the menu option
Pitch FreeEnv, ADSR 1 Depth .
Now adjust the modulation depth in the
resynator using the knob located next to the
main display.
The same applies to the destinations resynator
2 pitch and blender.
You will find further information on page 104.
How to define a free 4 levels 4 times
envelope
• Press (repeatedly if necessary) the status
shaper button until the free LED lights up.
Status Free appears in the main display.
• Stick.down the navigation stick to access the
menu option type. Here you can choose
between two free ADSR envelopes or one 4
levels 4 times envelope (see also page 100).
Twist the knob to select
4Level4Time.
• Stick.down the navigation stick to access the
menu option mode, which lets you select the
envelope mode.
• Turn the wheels to dial in four levels and four
times. Once you move a wheel, you can also
define its assigned value in the main display
using the knob.
Alternatively, you can navigate via stick.right/
left back and forth among the parameters.
• Define the depth of the envelope by twisting
one of the two depth knobs (or using the menu
option depth).
• If you want to modulate the depth of the
envelope via velocity, define the parameter velo
Depth (see page 109).
• You are dealing with free envelopes, so you
must determine the various modulation
destinations.
You can assign a module as the modulation
destination by selecting the corresponding
depth parameter in the menu of the desired
module and defining a value > 0 for it (values
range from 0 to 127).
Neuron.book Seite 112 Montag, 23. Dezember 2002 2:28 14