User Guide

Module: Shaper 1/2
111
• Stick.down the navigation stick to access the
menu option mode, which lets you select the
envelope mode.
• Adjust ADSR parameter values by turning the
wheels. Once you move a wheel, you can also
define its assigned value in the main display
using the knob. Alternatively, you can navigate
via stick.right/left back and forth among
individual envelope parameters.
• If you want to modulate all of the envelope’s
depth parameters via key pressure (velocity),
define the velo depth parameter (see
page 109).
• Now define the intensity of the envelope’s
effect on every resynator parameter level. To
this end, first select the desired scape or sphere
parameter level in the resynator module (using
the parameter level and select buttons). Use
the depth knob in the shaper to determine the
depth for each parameter level.
(Alternatively, you can enter these settings to
the menu’s depth options; see menu diagram.)
How to define a free ADSR envelope
• Press (repeatedly if necessary) the status
shaper button until the free LED lights up.
Status Free appears in the main display.
• Stick.down the navigation stick to access the
menu option type. Here you can choose
between two free ADSR envelopes or one 4
levels 4 times envelope (see also page 100).
Twist the knob to select
2ADSR.
• Define the mode, the ADSR parameter values of
the envelope as described for the amplifier
envelope (page 110).
• If you want to modulate the depth of the
envelope via velocity, define the parameter velo
depth (see page 109).
• You are dealing with free envelopes, so you
must determine the various modulation
destinations.
You can assign a module as the modulation
destination by selecting the corresponding
depth parameter in the menu of the desired
module and defining a value other than zero for
it (values range from -64 to +63).
Neuron.book Seite 111 Montag, 23. Dezember 2002 2:28 14