User Guide

108
Module: Shaper 1/2
Shaper 1/2: Parameters
The following table describes all shaper parameters
regardless of shaper status.
Sc
Release
Sc
Sustain
Shp1 FreeADSR
Mode
Decay
Shp1 FreeADSR
Attack
Shaper1: Wheel A
Wheel D
Wheel S
Wheel
R
Shp1 FreeADSR
Depth
Shaper1:
Depth
Sc
Release
Sc
Sustain
Shp2 FreeADSR
Mode
Decay
Shp2 FreeADSR
Attack
Shaper2: Wheel A
Wheel D
Wheel S
Wheel
R
Shp2 FreeADSR
Depth
Shaper2:
Depth
Shaper 1/2
Status Free
Shaper 1/2 Status: Free
Shaper 1/2 Free
Type
Free = 2ADSR
Free =
= Stick.up / stick.down
= Stick.left / stick.right
4 Levels 4 Times
Note also the depth
parameter at the desired
modulation destinations!
Shp1 FreeADSR
VeloDepth
Shp2 FreeADSR
VeloDepth
A/D/S/R The parameters of an ADSR envelope are
described on page 99.
The influence of the sustain level setting is -
like the depth setting - relative to the defined
target parameter value.
Depth Defines the intensity of the envelope’s effect
on the parameter that you want to modulate.
The greater the depth, the more intense the
influence on the parameter.
The amplifier envelope does not have a
depth parameter.
The amplifier ADSR envelope is always active.
...Continued on next page
Table 11: Shaper 1/2 parameters
Neuron.book Seite 108 Montag, 23. Dezember 2002 2:28 14