User Guide

106
Module: Shaper 1/2
Shaper 1/2: Menu
The shaper menu’s options vary in accordance with
the selected shaper status (shaper 1/2 status
button). The following illustrations depict the menus
for every status. The parameters of these menus are
summarized in table 11 on page 108.
... Continued from previous page
• Amplifier: The wheels define the ADSR
envelope that modulates the amplitude
of the given resynator (here too the
shaper > resynator routing is "hard-
wired").
• Free: In free mode you can (a) select
between the envelope types ADSR and
4 levels 4 times and (b) define
different modulation destinations. You
will find further information on
page 104.
An appropriate shaper menu appears in
the main display for the selected shaper
status (and thus the envelope type).
Good-to-know stuff:The shaper 1/2
status button does not activate or
deactivate an envelope. It serves solely
to select the envelope level (par. level,
amplifier, free) addressed by the wheels
or depth knobs. The par. levels envelope
is activated via the resynator's contour
control button, the
amplifier envelope is always active and
the free envelope is activated via the
respective depth knob.
Table 10: Control features of Shaper 1/2 (cont.)
Sc
Release
= Stick.up / stick.down
= Stick.left / stick.right
Sc
Sustain
Shaper 1 Amp
Mode
Decay
Shp1 Amp
Attack
Shaper 1/2
Status Amp
Shaper1: Wheel A
Wheel D
Wheel S
Wheel R
Sc
Release
Sc
Sustain
Shaper 2 Amp
Mode
Decay
Shp2 Amp
Attack
Shaper2: Wheel A
Wheel D
Wheel S
Wheel R
Shaper 1/2 Status: Amplifier
Neuron.book Seite 106 Montag, 23. Dezember 2002 2:28 14