User Guide

Module: Shaper 1/2
105
Shaper 1/2: Control features
Wheels
A/ D / S / R
or L/T 1-4
Input wheels for the envelope
parameters. The LED bar display indicates
the parameter value. The more LEDs light
up, the longer the defined time or, in the
case of a level, the higher the level. The
LEDs reveal the status of an envelope at a
glance.
When you move a wheel, the current
parameter also appears in numeric form
in the main display and can be edited
using the knob.
Every shaper defines a complete curve for
ADSR envelopes. The curve for the free 4
levels 4 times envelope (available only
in shaper status free) is entered using the
eight wheels of the two shapers.
Depth knob Shaper in par. level status:
Determines the intensity of the
envelope’s influence on the current
parameter. The knob affects the currently
selected parameter level. The defined
depth value is retained when you select
another level or another region (scape/
sphere) in the resynator. Depth is also
adjustable via menu.
...Continued on next page
Table 10: Control features of Shaper 1/2
Shaper in amp status:
In this mode, the envelope does not have
a depth parameter.
However, to make programming easier, we
have assigned the given resynator’s
volume to the knob.
Shaper in free status:
Determines the "overall depth" of the
free envelope. When using free
envelopes, please bear in mind the
relevance of the depth value determined
at the modulation destination! You will
find further information about this topic
on page 104.
Shaper 1/2
status
button
Determines the type of envelope that is
adjusted via the Wheels:
• Par. Levels: The adjusted parameters
define the ADSR envelope that
modulates the currently selected scape
or sphere parameter level of the given
resynator (shaper 1 > resynator 1,
shaper 2 > resynator 2). The defined
values are retained when you switch to
another level or region.
... Continued on next page
Table 10: Control features of Shaper 1/2 (cont.)
Neuron.book Seite 105 Montag, 23. Dezember 2002 2:28 14