User Guide

100
Module: Shaper 1/2
takes to return from the defined sustain level to a
value of zero after the key is released.
In shaper modes amplifier and par. levels always an
ADSR envelope is used.
4 levels 4 times envelope (4L4T)
This is the second type of envelope available in
addition to the ADSR curve. It is defined by four
paired values. Every paired value consists of a level
and a time. You can determine at which level the
envelope starts and how long it takes to achieve the
next level.
The phase indicated in gray (level 4) in the
illustration is comparable to an ADSR curve’s sustain
phase.
ADSR envelope in normal mode
4 levels 4 times envelope in normal mode
Neuron.book Seite 100 Montag, 23. Dezember 2002 2:28 14