User manual

Guided Tour - Model 2500 Rear Panel

1. Fuse sled - This contains a fuse holder and shows the currently selected

voltage rating for your Model 2500. Make sure the voltage rating is correctly

set before powering up the amplifier! Fuse ratings are 10 amp for 115 vac and

6.2 amp for 230 vac. For information on how to change the voltage rating,

see Appendix B on page 14.

2. AC input - Connect the supplied standard 3-pin “IEC” plug here.

3. Fan - The fan provides vital cooling to your Model 2500. Make sure that it

is kept free of all obstructions and that cool, fresh air is accessible at all times.

Also, try to ensure that the Model 2500 is used in a dust-free environment.

4. Effect Return jack - Use this 1/4” unbalanced jack to return low impedance (600

ohm) signal to the Model 2500 from a professional outboard effects processor.*