Datasheet

00
.
07
50
m
f
75
m
f
94
m
f
94
m
f
100
m
f
213
m
f
226
m
f
226
m
f
Typical configurations on pcb
All HARTING har-bus
®
HM connectors can be
assembled end to end in any configuration.
General rules:
_
Type B connectors should always be used in
combination with a type A and/or type C
connectors that are fitted with alignment
features.
_ Type C connectors must be assembled at
the end of a connector stack, to achieve
polarisation and avoid mismating.
_ To ensure the correct slot position of
connector stacks coding can be added with
style A connectors.
_ Starting with an A module (50 mm) any
module can be added within the above
recommendation (see typical examples
shown in the diagram).
m = male connector
f = female connector
Type A
Type A
Type C
Type B Type A
Type Monoblock 47
Type A Type A
Type A Type B Type A Type B
Type C
Type B Type A Type B Type B Type A
Type Monoblock 47 Type B Type Monoblock 47
Dimensions [mm]
110 signal contacts
165 signal contacts
CompactPCI 3U
220 signal contacts
CompactPCI 3U
220 signal contacts
220 signal contacts
495 signal contacts
CompactPCI 6U
535 signal contacts
CompactPCI 6U
535 signal contacts