Brochure

Ⓐ
Ⓑ
Englsih
Crimping
1. Insert the crimp contact into the tool opening Ⓐ. The
locator ensures that the crimp contact is automatically
positioned in the proper crimping position.
Operating instructions
2. Insert a properly stripped wire into the crimp contact Ⓑ.
3. Press the crimp tool's handles together in order to
crimp the contact. Press the handles closed until they
automatically reopen (refer also to the ratchet lock
section on page 20).
19
Operating Instructions: HARTING Four-Indent Crimp Tool / Edition 1.0