Brochure

HARTING Electric GmbH & Co. KG

Ⓑ

Ⓐ

English

Four-indent crimp tool 09 99 000 0888

1. Open the crimp tool.

2. Unlatch the settings dial (pull it out) and then turn it until

the desired number is visible in the scale on the back of

the crimp tool Ⓑ. Release the settings dial; give it a brief

turn so that it latches back into place.

▸ The HARTING four-indent crimp tool has now been

set and is ready for use with the selected contacts and

wires!

Protected against unintentional adjustments

This crimp tool features a settings dial Ⓐ which ensures

that the crimping depth cannot be re-adjusted unintenti-

onally. There is no need to set the crimping depth with a

plug gauge. When necessary, you may use the go /no-go

gauge 09 99 000 0889 to check that the crimp tool is fun-

ctioning properly.

NOTE

Preparing the crimp tool