Datasheet

30
.
12
F
Tooling
CPM press-in machines
The CPM prestige SI press-in machine
with a graphical user interface
The CPM prestige SI is a consequential
develop ment of the successful CPM 2001
press-in machines. The excellent design,
supported by a wide range of tools presents
a convenient, easy and comfortable way of
processing backplanes and daughtercards. The
machine is fully programmable and is supplied
with a graphical user interface for control and
visualisation of the complete process. The use of
a microprocessor control allows the recognition
and storage of different component heights, so
that the pressing-in of different components is
initiated simultane ously with only one button.
The user-friendly touch-screen guides the user
through the menu-orientated process controls.
The visualisation of the entire press-in process
(the position of the connector, press-in forces
etc.) allows the rapid recognition and eradication
of the possible error sources. With the addition of
a barcode reader (1D and 2D)
1)
the parameters
of every pcb layout can be stored, recalled and
loaded into the automated press-in programme.
The extensive operation monitor functions
simplify the service and support of the machine.
The machine employs the automatic switch-
off system “autosense”, known worldwide for
its reliability. The different connector types and
the tolerances of the pcb are automatically
recognised and taken into consideration at the
press-in operation, thus maximising the process
security.
Connector
type
Pcb
surface
Board
thickness
Force vs. distance curve
Hole diameter
Shown are the four most considerable influences of the press-in
process.
Visual guiding system
via touch monitor
Real photos of connectors
and tools
Process data Layout with current
position highlighted
1)
optional