Datasheet

01
.
44
DIN 41 612 · Coding systems
Identification Part No. Drawing Dimensions in mm
Coding system
without contact loss
To avoid accidental and incorrect mating of adjacent connectors a coding
system is required.This coding system is an integral part of both male and
female connactors. A comb with 12 coding pins, which is supplied under a
single part number, allows over 900 coding variations. The pins are to be
locked into the male and female connectors.
The connectors with the integrated coding facility are supplied for types
B, C, D and E and are available for all variants.
Please contact us.
Male and
female
connectors
Types
B, C, D and E
see product pages
or
on request
Coding pins
Mounting example
12 pins
on a comb
09 02 000 9928
Type
B C D D E E
Coding system
with contact loss
To avoid accidental and incorrect mating of adjacent connectors a coding
system is required. The coding is achieved by means of a code pin which
is inserted into the selected chamber of the female connector (the contact
cavity must be filled with a female contact!).
The opposite male contact must be removed with the help of the specially
designed tool.
Code pin for types
B, 2B,
C, 2C, 3C,
M, M-flat,
Q, 2Q,
R, R (HE 11), 2R,
har-bus 64
09 02 000 9901
Removal tool
for
male contacts
09 99 000 0133
Plastic
DIN Signal
to 2 A