Datasheet

5People | Power | Partnership

AWG 27 - 22

14 - 16 mm

0.5 - 0.6 inch

24 - 26 mm

0.9 - 1.0 inch

Slide the RJ45 insert into the connector housing

and lock with an audible “click”

Close cable manager and lock with an audible “click“

Slide connector housings with a pre-assembled screw over the cable,

then cut and strip the cable

Tighten the cable screw nut by hand

Lock the shield sheet with an audible “click”

Insert wires according to selected colour coding into the cable

manager and cut to correct length with side cutters

The cabling

Simple, safe and fast

Connectors must allow a reliable cable connection with

few parts and minimal effort.

With the development of the new

HARTING RJ

Industrial® 10G RJ45 connector these customer

requirements were paramount. The connector housing

with the novel cable clamp is delivered with pre-

assembled connecting nut. The RJ45 insert comprises

of only two parts. The moveable cable manager

mounted on the connector body allows the simple

insertion of wires and always guarantees a fault free

circuit of the insulation displacement connector.

For rapid identification of the correct position of the

coloured individual wires, the cable manager has been

furnished with a label containing a circuit plan. This

circuit label displays the universally used wire colours

according to EIA/TIA-568/A and B and for 4-wire

industrial Fast Ethernet applications indicating the

relative contact allocation. After wiring the connector a

portion of the label remains on the plug thus allowing

simple recognition of the relative contact position

in the cable manager on re-wiring the plug. All these

details permit – in only six steps – a rapid and safe

local assembly, whereby a time saving of up to 30 %

can be realized.