Datasheet

ManualsBrandsHARTING ManualsConnectorsSocket insert Han E 24-pin 24 Poles Socket, Crimp

Han

E / EE

Han

6 E

Han

10 E

Han

16 E

Han

24 E

Han E

Technical characteristics

Current carrying capacity

The current carrying capacity is limited by maximum temperature

of materials for inserts and contacts including terminals. The

current capacity-curve is valid for continuous, not interrupted

current-loaded contacts of connectors when simultaneous power

on all contacts is given, without exceeding the maximum tempe-

rature.

Control and test procedures according to DIN IEC 60 512-3.

Working current

Ambient temperature

Wire gauge: 1.5 mm

Working current

Ambient temperature

Wire gauge: 2.5 mm

Specifications DIN VDE 0627

DIN VDE 0110

DIN EN 61 984

Approvals , , SEV

Inserts

Number of contacts 6, 10, 16, 24, 32 (2 x 16),

48 (2 x 24) + PE

Electrical data

acc. to DIN EN 61 984 16 A 500 V 6 kV 3

Working current

Working voltage

Rated impulse voltage

Pollution degree

– Pollution degree 2 also 16 A 400/690 V 6 kV 2

Working voltage

acc. to UL/CSA 600 V

Insulation resistance ≥ 10

Ω

Material Polycarbonate

Temperature range - 40

C … +125

Flammability acc. to UL 94 V 0

Mechanical working life

- Mating cycles ≥ 500

Contacts

Material copper alloy

Surface

- hard-silver plated 3 µm Ag

- hard-gold plated 2 µm Au over 3 µm Ni

Contact resistance ≤ 1 mΩ

Crimp terminal

- mm

0.5 - 4.0 mm²

- AWG 20 - 12

- Stripping length 7.0 mm

Screw terminal

- mm

2.5 mm²

- AWG 14

- Tightening/test torque 0.5 Nm

- Stripping length 7.5 mm

Hoods/Housings

Material die cast aluminium

Surface powder-coated

RAL 7037

Locking element Han-Easy Lock

Hoods/Housings seal NBR

Temperature range - 40

C … +125

Degree of protection

acc. to DIN EN 60 529

for coupled connector IP 65

Further selection

of hoods/housings chapter 30 and chapter 31

Accessories

Crimping tools chapter 99

Cable clamps chapter 40

Coding of Hoods/Housings chapter 40

Label acc. to CSA-approval chapter 40

Han-Snap

chapter 11

Special insert fixing screws chapter 40

Summary of content (14 pages)

PAGE 1
Han E® Specifications Approvals Technical characteristics Current carrying capacity DIN VDE 0627 DIN VDE 0110 DIN EN 61 984 , The current carrying capacity is limited by maximum temperature of materials for inserts and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature. Control and test procedures according to DIN IEC 60 512-3.
PAGE 2
Han® ES Specifications Approvals Technical characteristics Current carrying capacity DIN VDE 0627 DIN VDE 0110 DIN EN 61 984 , The current carrying capacity is limited by maximum temperature of materials for inserts and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature. Control and test procedures according to DIN IEC 60 512-3.
PAGE 3
Han® 6 E · Han® 6 ES · Han® 6 ESS Size 6 B 500 V 16 A Number of contacts 6 Inserts Han E / EE Part No. Identification Screw terminal Series Male insert (M) Female insert (F) 09 33 006 2601 09 33 006 2701 Drawing Dimensions in mm ® Han E with wire protection Cage-clamp terminal Han® ES 1) 09 33 006 2616 Cage-clamp terminal Distance for contact max.
PAGE 4
Standard Hoods with 1 lever on the housing Size 6 B Part No. Identification Low construction High construction M Drawing Dimensions in mm Hoods side-entry 19 30 006 1540 Han E / EE 20 19 30 006 0546 25 19 30 006 0547 32 Hoods top-entry Hoods 19 30 006 1440 20 19 30 006 0446 25 19 30 006 0447 32 Protection covers for hoods metal 09 30 006 5401 09 30 006 5423 Hoods cable to cable h 19 30 006 1750 19 30 006 0756 20 42.5 25 72.5 Protection cover for cable to cable hood 03 .
PAGE 5
Standard Housings with 1 lever on the housing Size 6 B Part No.
PAGE 6
Han® 10 E · Han® 10 ES · Han® 10 ESS Size 10 B 500 V 16 A Number of contacts 10 Inserts Han E / EE Part No. Identification Screw terminal Series Male insert (M) Female insert (F) 09 33 010 2601 09 33 010 2701 Drawing Dimensions in mm ® Han E with wire protection Cage-clamp terminal Han® ES 1) 09 33 010 2616 Cage-clamp terminal Distance for contact max.
PAGE 7
Standard Hoods/Housings with 2 levers on the housing Size 10 B Part No.
PAGE 8
Standard Hoods/Housings with 1 lever on the housing Size 10 B Part No.
PAGE 9
Han® 16 E · Han® 16 ES · Han® 16 ESS Size 16 B 500 V 16 A Number of contacts 16 Inserts Han E / EE Part No. Identification Screw terminal Series Male insert (M) Female insert (F) 09 33 016 2601 09 33 016 2701 Drawing Dimensions in mm ® Han E with wire protection Cage-clamp terminal Han® ES 1) 09 33 016 2616 Cage-clamp terminal 09 33 016 2716 Han E® 09 33 016 2602 Wire gauge 03 . 22 09 33 016 2702 (mm2) Male contacts Female contacts Crimp contacts 0.14-0.37 0.5 0.75 1.0 1.5 2.
PAGE 10
Standard Hoods/Housings with 2 levers on the housing Size 16 B Part No.
PAGE 11
Standard Hoods/Housings with 1 lever on the housing Size 16 B Part No.
PAGE 12
Han® 24 E · Han® 24 ES · Han® 24 ESS Size 24 B 500 V 16 A Number of contacts 24 Inserts Han E / EE Part No. Identification Screw terminal Series Male insert (M) Female insert (F) 09 33 024 2601 09 33 024 2701 Drawing Dimensions in mm ® Han E with wire protection Cage-clamp terminal Han® ES 1) 09 33 024 2616 Cage-clamp terminal 09 33 024 2716 09 33 024 2672 09 33 024 2772 Wire gauge 09 33 024 2602 09 33 024 2702 03 . 26 Male contacts Female contacts Crimp contacts 0.14-0.
PAGE 13
Standard Hoods/Housings with 2 levers on the housing Size 24 B Part No.
PAGE 14
Standard Hoods/Housings with 1 lever on the housing Size 24 B Part No.