Datasheet

Circular Connectors
Page 3 / 12
Specifications DIN VDE 0627
DIN VDE 0110
Inserts
Number of contacts
Working current
- power contact
- signal contact
(see Derating Diagram)
Working voltage
1)
Degree of pollution
Test voltage U
rms
Insulation resistance
Material
Temperature range
Flammabilitiy acc. to UL 94
Hoods/housings
Material
Surface
Flat sealing
O-ring-sealing
Temperature range
IP acc. to DIN 40050
in locked position
Copper-zinc alloy
Nickel plated
NBR
FPM (Viton)
- 40° C ... + 115° C
IP 67
Contacts
Material
Surface
Contact resistance
Screw termination
- power contact
- signal contact
Solder termination
- power contact
- signal contact
Crimp termination
- D-Sub contact
PCB solder termination
- power contact
- signal contact
- solder length with
reference to bulkhead
mounted housing
Copper alloy
Gold plated
< 5 mOhm
.
0.14 - 1.0 mm², AWG 26 - 16
0.14 - 0.75 mm², AWG 26 - 18
.
0.14 - 2.5 mm², AWG 26 - 14
0.14 - 1.0 mm², AWG 26 - 18
.
see Subminiature D catalogue
.
Ø 1.5 mm
Ø 0.6 mm
3.5 mm
6 9 12 17 19
.
15 A 1x15A
8 x 7A 7A 7A 16 x 7A
3 x 10A
.25V~ / 60V-
3
1.5 kV
> 10
12
Ohm
Thermoplastic polyester (PBT)
- 40° C ... + 115° C
V 0
Derating Diagram
Shielding of the EMC housing
Technical Details
1) Acc. to DIN VDE 0627 metallic parts which may be touched by a person
and may have voltages present under fault conditions, must have integral
protection. Therefore this R 23 connector is limited for use up to 25V~/60V-.
A
mbient temperature
Working current
Frequency [MHz]
Shielding [dB]
Insert: 12 positions
Wire gauge: 1 mm² (AWG 18)
Han
®
R 23