Brochure

ManualsBrandsHart & Cooley ManualsCommercial Registers & Grilles30" x 12" (Wall Opening Size) White Commercial Supply Register (821 Series)

Commercial

Grilles, Registers & Diffusers

Edition 10

Summary of content (130 pages)

PAGE 1
Commercial Grilles, Registers & Diffusers Edition 10
PAGE 2
Table of Contents Product Information Engineering Data REGISTERS & GRILLES—STEEL 800 Series Curved Blade Steel One Through Four-Way .......................................................5 821 Vertical Single Deflection, w/MS ..........................................................................6 ........................ 79 831 Horizontal Single Deflection, w/MS .....................................................................6 ........................ 79 92HVO Double Deflection Horizontal Face ..
PAGE 3
Table of Contents Table of Contents LIGHT COMMERCIAL Product Information Engineering Data CEILING DIFFUSERS—STEEL 20 Round Adjustable ..............................................................................................28 ........................ 88 19 Round OB Damper ............................................................................................28 24 Steel Square (Ceiling) Diffuser ..........................................................................29 .......................
PAGE 4
Table of Contents Product Information T-BAR RETURN 659T 659TI 673T 673TI 673TPI R6 96AFBT 96AFBTI RHF45T RCBFT REF5T REF5TI PFT PFTI Engineering Data AIR FILTER GRILLES Steel—Lanced Face ..........................................................................................53 ...................... 114 Steel—Lanced Face with Fiberglass Back .......................................................53 ...................... 114 Steel—Filter Grille ...........................................................
PAGE 5
Table of Contents Table of Contents T-BAR GRILLES & DIFFUSERS Product Information FBR SBP RFPS RFPR PDS PDSD PDR PD PDF Engineering Data Steel—Stamped Curved Blade .........................................................................67 Steel—Perforated Face Shallow Back ..............................................................67 ...................... 116 Steel—Perforated Face with Directional Deflector ............................................68 ......................
PAGE 6
Registers & Grilles - Steel 800 Series Steel construction Curved Blade design 1 - 4-way or 2-way corner air diffusion Available with or without damper Damper options: Multi-Shutter or Opposed Blade Individually adjustable bars for easy positive setting Opposed Blade damper is screwdriver operated Bright White finish Registers & Grilles - Steel • • • • • • • • 800 Series Available Sizes (in.
PAGE 7
Registers & Grilles - Steel 821 Registers & Grilles - Steel • All-steel construction • Vertical adjustable face bars • Horizontal multi-shutter valve • Bright White finish HT 4 5 6 8 10 12 14 16 18 20 24 6 X 8 X X X X 821 Available Sizes (in.) WIDTH 10 12 14 16 18 20 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 24 X 30 X 36 X X X X X X X X X X X X X X X X X X X X Contact factory for sizes not listed.
PAGE 8
Registers & Grilles - Steel 92HVO Register • • • • • All-steel construction Adjustable face bars may be set to any desired deflection Horizontal front bars Vertical second bars Larger sizes available in multiple-piece construction • Bright White finish Note: Screw hole location details on page 119 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 6 X X X 8 X X X X 10 X X X X X 12 X X X X X X 92HVO Available Sizes (in.
PAGE 9
Registers & Grilles - Steel 92VHO Register Registers & Grilles - Steel • • • • • • All-steel construction Vertical front bars Horizontal second bars Adjustable face bars may be set to any desired deflection Larger sizes available in multiple-piece construction Bright White finish HT Note: Screw hole location details on page 119 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 6 X X X 8 X X X X 10 X X X X X 12 X X X X X X 92VHO Available Sizes (in.
PAGE 10
Registers & Grilles - Steel 94 Grille • All-steel construction • Horizontal face bars set straight • Face bars permanently fixed into a heavy steel frame at 90-degree angle from face • Larger sizes available in multiple-piece construction • Bright White finish Note: Screw hole location details on page 119 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 6 X X X 8 X X X X 10 X X X X X 12 X X X X X X 94 Available Sizes (in.
PAGE 11
Registers & Grilles - Steel 94A Grille (No Damper) HT Registers & Grilles - Steel • All-steel construction • 3/4” spaced fins set at 35°, horizontal face bars set at 35° • Larger sizes available in multiplepiece construction • Also available as 94AT T-Bar Return Grille (see page 57) • Bright White finish 6 X X X 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 94A Available Sizes (in.
PAGE 12
Registers & Grilles - Steel 98VOH Ventilation Register 98VOHP • Steel construction • Front bars are individually adjustable • Horizontal blades are gang-operated to deflect air up or down thru face (no shut-off) • Handle manually operated • Pulley field-mounted only • Pulley assembly must be ordered separately • Pulley operation allows air deflection adjustments from floor • Two pulley assembly kits required for grilles over 24” wide Registers & Grilles - Steel • Bright White finish Ventilation Pulley
PAGE 13
Registers & Grilles - Aluminum HX Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Horizontal front bars • Single row of individually adjustable horizontal face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 120 HT 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 4 X X X X 6 X X X X 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 16 X X X X X X X X HX Available Sizes
PAGE 14
Registers & Grilles - Aluminum HM Register • • • • • Extruded aluminum construction Single row of individually adjustable horizontal face bars Pivoted bars for easy positive setting Lever-operated, multi-shutter valve Bright White or Satin Anodized finish 6 8 10 4 X X X 5 X X X 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 Note: Screw hole location details on page 120 HM Available Sizes (in.
PAGE 15
Registers & Grilles - Aluminum HVD Register Registers & Grilles - Aluminum • • • • • Extruded aluminum construction Two rows of individually adjustable face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized finish HT Note: Screw hole location details on page 120 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 HVD Ava
PAGE 16
Registers & Grilles - Aluminum VD Register Extruded aluminum construction Vertical front bars Single row of individually adjustable face bars Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized finish Note: Screw hole location details on page 120 HT 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 16 X X X X X X X X 18 X X X X X X X X X VD Available Sizes (in.
PAGE 17
Registers & Grilles - Aluminum VH Register Registers & Grilles - Aluminum • • • • • • Extruded aluminum construction Vertical front bars Horizontal second bars Two rows of individually adjustable face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Bright White or Satin Anodized finish HT Note: Screw hole location details on page 120 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38
PAGE 18
Registers & Grilles - Aluminum CH 1 Grille • • • • • Extruded aluminum construction One-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Bright White or Satin Anodized finish HT 30 X X X X X X X X X X X X X 32 X X X X X X X X X X X X X X 34 X X X X X X X X X X X X X X X 36 X X X X X X X X X X X X X X X X 32 X X X X X X X X X X X X X X 34 X X X X X X X X X X X X X X X 36 X X X X X X X X X X X X X X X X 32 X X X X X X X X X X X X X X 34 X X X X X X X X
PAGE 19
Registers & Grilles - Aluminum CH2 Grille Registers & Grilles - Aluminum • • • • • Extruded aluminum construction Two-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Bright White or Satin Anodized finish HT 6 8 10 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 CH2 Available Sizes (in.
PAGE 20
Registers & Grilles - Aluminum C3 Grille 6 8 10 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 12 X X X X C3 Available Sizes (in.
PAGE 21
Registers & Grilles - Aluminum C4 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Four-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish HT 6 8 6 X X 8 X 10 12 14 16 18 20 22 24 26 28 30 32 34 36 10 X X X 12 X X X X C4 Available Sizes (in.
PAGE 22
Registers & Grilles - Aluminum CH2CL Grille 6 8 6 X X 8 X 10 12 14 16 18 20 22 24 26 28 30 32 34 36 10 X X X CH2CL Available Sizes (in.
PAGE 23
Registers & Grilles - Aluminum RCB Grille RCBD Register Registers & Grilles - Aluminum • • • • Extruded aluminum construction Curved blades fixed on one-inch spacing Opposed-blade damper Bright White or Satin Anodized finish HT 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 Blades at 40° angle 6 X X X X 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X RCB, RCBD Available Sizes (in.
PAGE 24
Registers & Grilles - Aluminum RE5 Grille • • • • All-aluminum construction Grid core 1/2” x 1/2” x 1/2” Square core design with extruded aluminum frame Bright White or Mill finish 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 16 X X X X X X X X RE5 Available Sizes (in.
PAGE 25
Registers & Grilles - Aluminum REF5 Filter Grille, Grid Core Registers & Grilles - Aluminum • • • • • • All-aluminum construction 1/2” x 1/2” x 1/2” square core design Accommodates standard 1” thick disposable filter (not included) Filter grilles equipped with quarter turn fasteners Bright White or Mill finish Specify REF52 for 2” filter HT 6 8 10 12 4 X X X X 5 X X X X 6 X X X X 8 X X X 10 X X 12 X 14 16 18 20 22 24 25 26 28 30 32 34 36 REF5 Available Sizes (in.
PAGE 26
Registers & Grilles - Aluminum RH45 Grille RHD45 Register Extruded aluminum construction Horizontal bars at 45 degrees Face bars permanently fixed into heavy aluminum frames at a 45-degree angle Opposed-blade damper on RHD45 Bright White or Satin Anodized finish HT 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 RH45 RHD45 4 X X X X 6 X X X X 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 16 X X X X X X X X RH45 Available Sizes (in.
PAGE 27
Registers & Grilles - Aluminum RH90 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Face bars permanently fixed into heavy aluminum frames at a 90-degree angle from face • Bright White or Satin Anodized finish HT 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 4 X X X X 6 X X X X 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 16 X X X X X X X X RH90 Available Sizes (in.
PAGE 28
Registers & Grilles - Aluminum TG Transfer Grille • • • • • Extruded aluminum construction Vision proof Inverted “Y” type grille bar for best vision proof quality and airflow Excellent for installation in doors or partitions Bright White or Satin Anodized finish Registers & Grilles - Aluminum TGF Transfer Grille Frame • Extruded aluminum construction Note: When framing both sides of the door or partition opening, use the TGF frame with the TG Grille. Adjustable from 1” to 21/8” door thickness.
PAGE 29
Ceiling Diffusers - Steel 20 Round Diffuser Ceiling Diffusers - Steel • Steel construction • For ceiling or exposed duct installation • Five-step positioning of air pattern adjustment • 360-degree pattern, horizontal to vertical pattern change • Removable center core • Diffuser outer shell fastens directly to duct; margins fit tight to ceiling for optimum ceiling appearance • Optional #19 damper; duct-mount only • Bright White finish Listed Size A B C Pos. 1 C Pos.
PAGE 30
Ceiling Diffusers - Steel 24 Square Ceiling Diffuser • All-steel construction • Step-down face deflects air stream 360 degrees • Bright White finish Only available in sizes shown. • All-steel construction • Golden Sand enamel finish • Used but not furnished with #24 ceiling diffusers. Ceiling Diffusers - Steel 21 Installation Frame 24 Ceiling Diffuser (in.) Free Area No. of Size Sq. Inches Cones 6 41 3 8 65 3 10 84 3 12 123 4 14 152 4 16 199 5 18 236 5 20 293 6 22 338 6 24 404 7 21 Available Sizes (in.
PAGE 31
Ceiling Diffusers - Steel SRE Diffuser • • • • Steel construction Removable core Flat margin style Optional opposed blade damper available for field installation (see SR7 damper) • Bright White enamel finish HT 6 9 12 15 18 21 24 SRE Available Sizes (in.) WIDTH 6 9 12 15 18 21 X X X X X X X X X X X X X X X X X X X X X 24 X X X X X X X Ceiling Diffusers - Steel See page 34 for available air patterns.
PAGE 32
Ceiling Diffusers - Steel SR6 Control Grid • • • • Steel construction Field-mounts on diffuser Used to control airflow at the diffuser Mill finish HT 6 9 12 15 18 21 24 Steel construction Used to control airflow at the diffuser Mill finish Field installed for use with SRE, SRS or SRT diffusers HT 6 9 12 15 18 21 24 SR7 Available Sizes (in.) WIDTH 6 9 12 15 18 21 X X X X X X X X X X X X X X X X X X X X X 24 X X X X X X X Ceiling Diffusers - Steel SR7 Volume Damper • • • • SR6 Available Sizes (in.
PAGE 33
Ceiling Diffusers - Aluminum ARE Diffuser Ceiling Diffusers - Aluminum • Extruded aluminum construction • Removable core • Flat margin style • Optional factory-mounted aluminum opposed-blade damper available as ARED • Bright White or Satin Anodized finish See page 34 for available air patterns. HT 6 9 12 15 18 21 24 27 30 33 36 6 X 9 X X See page 34 for available air patterns.
PAGE 34
Ceiling Diffusers - Aluminum ARS Diffuser See page 34 for available air patterns.
PAGE 35
Ceiling Diffusers - Steel/Aluminum Neck View Type SR & AR Air Patterns Style Listed Sizes 6x6 9x9 12x12 15x15 18x18 21x21 Ceiling Diffusers - Steel/Aluminum STYLE 4 24x24 27x27 30x30 33x33 36x36 24 x 24 Max. in Steel 9x6 to 45x6 12x9 to 45x9 15x12 to 45x12 18x15 to 45x15 21x18 to 45x18 STYLE 4 Listed Sizes 6x6 9x9 12x12 15x15 18x18 21x21 STYLE 3 24x21 to 45x21 27x24 to 45x24 30x27 to 45x27 33x30 to 45x30 36x33 to 45x33 24 x 21 Max.
PAGE 36
Ceiling Diffusers - Aluminum ASRE Diffuser • • • • • • Extruded aluminum construction Flat margins overlap opening For use with roof-mounted installations Removable core Return damper available - AR7 Supply damper available - AS7 • Bright White or Satin Anodized finish • Extruded aluminum construction • Step-down (beveled) margins overlap opening and lowers the diffuser from the ceiling • For use with roof-mounted installations • Removable core • Bright White or Satin Anodized finish • Return damper avai
PAGE 37
Ceiling Diffusers - Aluminum MCD Adjustable Modular Diffuser MCD Available Sizes (in.) 6” x 6”, 8” x 8”, 10” x 10”, 12” x 12”, 14” x 14”, 16” x 16”, 18” x 18”, 20” x 20”, 22” x 22” Ceiling Diffusers - Aluminum • Extruded aluminum construction • Four modular cores provide variable pattern adjustments of four-way, three-way, twoway, or one-way horizontal air patterns • Flat margin • Fixed fins • Bright White finish MCDD Adjustable Modular Diffuser MCDD Available Sizes (in.
PAGE 38
Ceiling Diffusers - Aluminum MCDSD Adjustable Modular Diffuser MCDSD Available Sizes (in.
PAGE 39
Spiral Diffusers Model SV Single-Deflection Diffuser Spiral Diffusers (Shown with scoop) Size restrictions apply. See price list for sizes and ordering information.
PAGE 40
Spiral Diffusers Model USVH Double Deflection Universal Diffuser Size restrictions apply. See price list for sizes and ordering information. USVH Available Sizes (in.) 10” x 3” to 36” x 12” Model SS Slot Face Diffuser Size restrictions apply. See price list for sizes and ordering information. SS Available Sizes (in.) One to four slots wide up to 48” long • Extruded aluminum construction • Slot sizes available: 1/2’’, 3/4’’, 1’’ • Optional face adjustable scoop to direct airflow.
PAGE 41
Linear and Slot Diffusers HOW TO ORDER Linear and Slot Diffusers LS/LF Series Diffuser Minimum width 1-1/2” Note: Floor application must be ordered as “LF.” Eight-inch maximum width for constant traffic; 12” maximum width for occasional traffic; maximum length 72”.
PAGE 42
Linear and Slot Diffusers L Series - Dimensional Data Mounting Style 0 (Floor/Sill) LF Mounting Style 1 (Ceiling) LS Mounting Style GO Mounting Style 00 (Bars Only) Linear and Slot Diffusers Mounting Style 3 Mounting Style 2 (Ceiling/Sidewall) LS 00 Bar Style Only w/o Mounted Damper or Control Grid (Ceiling/Sidewall) LS (Concrete/Tile) LF BAR STYLES Note: Quantity of bars = 2 x listed width minus 2. Example: 4” listed width = 4” x 2 = 8 minus 2 = 6 bars.
PAGE 43
Linear and Slot Diffusers L Series Single-Leaf Damper Option • Aluminum construction • Leaf type for sizes 11/2” to 3” Note: Order with desired diffuser for attachment at factory. Linear and Slot Diffusers Cannot be used with hanger brackets. L Series G Grid Option • Aluminum construction • Individual adjustable blades • Cannot be used with hanger brackets Note: G Grid blades are assembled parallel to short dimension. Order with desired diffuser for factory fitting.
PAGE 44
Linear and Slot Diffusers MARGIN STYLE SLOT S Series Slot Diffusers DIFFUSER ONLY with Hanger Bracket with No. 2 Standard Mounting Style 0 Mounting Style 1 Mounting Plaster Frame BO B1 B2 EO E1 E2 with No. 3 Wall-Mounting Plaster Frame B3 1” / 1 /2 ” 3 4” with No. 4 Wall-to-Wall Mounting Plaster Frame B4 1” / 1 /2 ” 3 4” FO HOW TO ORDER S Number of slots 01 to 10 1” 3 /4 ” / 1 2” End Cap LO 1” / 1 /2 ” 3 4” Note: Narrow regress T-Bar ceiling only.
PAGE 45
Linear and Slot Diffusers Damper Single-leaf dampers are furnished in each slot opening throughout the entire diffuser length when specified. Dampers are fastened to the margin and are spring-loaded to hold their setting at all duct pressures. Multiple dampers are furnished for grille lengths over 24 inches. Linear and Slot Diffusers Dampers are part of the S Series and are not specified separately.
PAGE 46
Linear and Slot Diffusers STYLE B0 STYLE B1 Also for T-Bar applications Linear and Slot Diffusers Order 223/4” or 463/4” lengths with End Caps. Duct width equals overall width. * *Overall width is only 5/16” greater than the duct width.
PAGE 47
Linear and Slot Diffusers STYLE E1 STYLE E0/F0 Linear and Slot Diffusers Also for T-Bar applications For E0, order 22” and 46” lengths with End Caps.
PAGE 48
Linear and Slot Diffusers S Series Mitered Corners Mitered Corner Sections Order as: MC S 90-degree mitered corners are available as factory-fabricated section. Precise factory cutting and assembly reduces field fabrication time and assures proper fit. Corner sections are furnished and blanked off. Corner sections butt to adjacent straight sections, which are spliced together with aligning keys. FINISH SA - Satin Anodized W - Painted White NO.
PAGE 49
Louvers Louvers DL Drum Louver Drum Louver Available Sizes • All-aluminum construction • Horizontal and vertical air stream control • Galvanized, opposedblade damper (optional) • Adjustable drum and vane design • White or Mill finish 6” x 12”, 6” x 18”, 6” x 24”, 6” x 30”, 6” x 48”, 6” x 60” 10” x 20”, 10” x 25”, 10” x 30”, 10” x 35”, 10” x 40”, 10” x 50” 12” x 30”, 12” x 40”, 12” x 50”, 12” x 70” 15” x 30”, 15” x 50”, 15” x 60”, 15” x 70” Order H x W Duct Opening Sizing Listed Height Size Duct Openi
PAGE 50
Louvers BV Brick/Block Vent • Extruded aluminum construction • Standard masonry size • Maximum water protection • 6063-T5 extruded aluminum alloy • 18 x 16 mesh aluminum insect screen standard • 4” standard depth • Satin Anodized finish Note: To order specify Model, Depth, Finish Example: BV168 4 SA DIMENSIONS/FREE AREA STANDARD BRICK JUMBO BRICK MODULAR BLOCK Masonry Opening Size A B Width Inches Height Inches Free Area Sq. Ft. 802 ONE BRICK 8 2 1/ 2 .01 805 TWO BRICK 8 4 3/ 4 .
PAGE 51
Louvers 4ABC Adjustable Louver • • • • • • • • Extruded aluminum construction Adjustable baffle blades on 4” centers 4” louver depth Channel frame Max.
PAGE 52
Louvers 245ZC Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2” louver depth Channel frame Available with bird screen or insect screen • Mill finish standard 245ZF Stationary Louver 245ZF Shown • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2” louver depth Flange frame Available with bird screen or insect screen • Mill finish standard Louvers 445ZC Stationary Louver • • • • • • Extruded aluminum constr
PAGE 53
T-Bar Construction Features T-Bar Construction Features Our popular supply and return products for T-Bar A unique modular collar system provides a standard ceilings are an innovative response to the challenge of collar and damper unit, which can be shared between creating a better indoor environment. T-Bar products a number of different T-Bar products.
PAGE 54
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 659T Steel Lanced Filter Grille 659T / 659TI Available Sizes 20” x 20” with extended frame (overall 233/4” x 233/4”) for 24” x 24” openings 44” x 20” with extended frame (overall 473/4” x 233/4”) for 48”x24” opening (659T only) • Steel construction • Lanced-face design with 1/3” blade spacing • Flush, removable face with concealed latches and hinges can be installed in any direction • Uses standard 1” disposable filters (not furnished) • Bri
PAGE 55
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 673TPI R6 Steel Filter Grille 673TPI R6 Available Size 20” x 20”, overall 233/4” x 233/4” • Steel construction • Lanced-face design with 1/2” blade spacing • Flush, face with screwdriver latches and piano hinges can be installed in any direction • Plenum box with R6 insulated ductboard • Uses standard 1” disposable filters (not furnished) • Bright White finish Molded Fiberglass Back R4.
PAGE 56
96AFBTI Steel Fixed-Bar Filter Grille with Fiberglass Back See page 54 for fiberglass specifications. T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 96AFBTI Available Size 20” x 20”, overall 233/4” x 233/4” • Steel construction • Bar-style face design • Flush, removable face with concealed latches and hinges, can be installed in any direction • R4.
PAGE 57
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles REF5T/REF5TI Aluminum Egg Crate Filter Grille REF5T/ REF5TI REF5T only Available Sizes 20” x 20” with extended frame (overall 233/4” x 233/4” ) for 24” x 24” openings 44” x 20” with extended frame (overall 473/4” x 233/4”) for 48” x 24” openings • Aluminum and steel construction • Egg crate style face • Hinged to filter frame • Mount flush with T-Bar ceilings • REF5T with thumb screw fasteners, REF5TI with cam lock • Uses standard 1” dispos
PAGE 58
T-Bar Return-Air Grilles T-Bar Return-Air Grilles 94AT Steel Bar-Style Return Grille 94AT Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 46” x 22” (overall 473/4” x 233/4”) for 48” x 24” openings • Steel construction • Mount flush with T-Bar ceilings • Bright White finish RH45T Aluminum Bar-Style Return Grille RH45T Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 46” x 22” (overall 473/4” x 233/4”) for 48” x 24” openings • Extruded aluminum constr
PAGE 59
T-Bar Return-Air Grilles T-Bar Return-Air Grilles RE5T Aluminum Egg Crate Return Grille • • • • RE5T Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 22” x 46” (overall 473/4” x 233/4”) for 48” x 24” openings All aluminum construction Egg crate style face Mount flush with T-Bar ceilings Bright White or Mill Aluminum finish RE5TI Aluminum Egg Crate Return Grille with Insulated Back RE5TI Available Size grid core face 1/2” x 1/2” x 1/2” • • • • All aluminum construction Egg cr
PAGE 60
444 SurfAire® Aluminum Face Renovator Series Diffuser T-Bar Surfaire/Renovator Diffusers T-Bar Surfaire/Renovator Diffusers 444 Available Size overall size 233/4” x 233/4” • Aluminum face • Unique deflector apertures • Air distributed in thin layers along ceiling surface allowing optimum mixing of conditioned air • Formed galvanized steel back panel • Frame includes four seismic safety connections • Back plate covered with glass fiber insulation to reduce condensation • Aluminum foil vapor barrier protec
PAGE 61
T-Bar Rezzin Diffusers :D\ 'LIIXVHU Available Size (in.) 24 x 24 T-Bar Rezzin Diffusers 4-Way Rezzin T-Bar Diffuser • Engineered polymer construction • Four-way deflection • Available with Rezzin square-to-round, ordered separately • Bright White finish • Contains metal screws 0RGXODU &RUH Available Size (in.
PAGE 62
T-Bar Rezzin Diffusers Rezzin Square Ceiling Diffuser Engineered polymer construction 12”x12” face 6”, 7” and 8” collars included Ratcheting cam lock–install without screws Removable core and integral damper Available in 4-way, 3-way and 2-way corner • Bright White finish • Contains metal parts 6TXDUH Available Size (in.
PAGE 63
T-Bar Fixed-Pattern/Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers HVS/HVS R6 Steel High-Volume Supply • • • • • • • • • • • • Steel construction Provides high air volume delivery 360-degree air diffusion Formed back panel Fixed core Fiberglass insulation blanket with foil vapor HVS Shown barrier to minimize condensation on HVS Insulation prescored to accommodate collar size desired R6 molded fiberglass back on HVS R6; use 5400 with 5400PP Accepts unique 2” high snap-in collar (5400 series) (6”
PAGE 64
T-Bar Fixed-Pattern Diffusers • • • • • • • • • • • FPD3 T-Bar Available Size Overall Size 233/4” x 233/4” T-Bar Fixed-Pattern Diffusers FPD3/FPD3 R6 Steel Fixed-Pattern Diffuser Steel construction Provides high air volume delivery 360-degree air diffusion Three cone fixed core Fixed collar 6” to 14” Unique 2” high collar permits easy flex connections Utilizes butterfly damper (3800 Series) inserted in collar–order separately Damper adjustable thru face Formed steel back panel Bright White finish FPD3 R
PAGE 65
T-Bar Fixed-Pattern/Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers DPD/DPD R6 Steel T-Bar Plate Diffuser DPD/DPD R6 Available Sizes 6” 8” 10” 12” 14” • Aesthetically appealing, single-face plate design • 360° air diffusion pattern • Detachable face plate • 2” fixed collar • Optional R6 insulated back (DPD R6) • White finish ADPD Aluminum T-Bar Plate Diffuser • Aesthetically appealing, single-face plate design • 360° air diffusion pattern • Detachable face plate • 2” fixed collar • Constructed
PAGE 66
T-Bar Fixed-Pattern Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers RENPS/ARENPS RENPS Available Size Overall 233/4” x 233/4” RENPS R6 Steel/Aluminum Perforated Supply Diffuser with Insulated Back • Perforated steel face with deflector • Molded fiberglass back panel, available in R4.
PAGE 67
T-Bar Perforated Supply/Return T-Bar Perforated Supply/Return CBPS/CBPR Steel Curved-Blade Perforated Supply/Return CBPS Curved-Blade Perforated Supply • Steel construction • Removable, hinged face allows for easy access to air pattern control core • Individually adjustable pattern deflectors factory-set at 4-way deflection; can be field-adjusted for 1, 2, 3-way air patterns • Available in 6”, 8”, 10”, 12”, 14” and 16” diameter necks • Unique 2” high collar permits easy flex connections • Accepts 3800 S
PAGE 68
T-Bar Perforated Supply/Return FBCS Flat Back Perforated Supply FBR Flat Back Return FBCS/FBR Available Size Overall Size 233/4” x 233/4” Engineering Data not available T-Bar Perforated Supply/Return FBCS/FBR Steel Flat Back Perforated Supply/Return Diffuser • Supply diffuser with 4-way deflector • Return without deflector • 1” thick fiberglass back with foil vapor barrier • Back with preprinted template accepts 6” to 18” spin collar or unique tab collar (6400 series 6”-14”), 5400 6”-18” with 5400PP •
PAGE 69
T-Bar Perforated Supply/Return T-Bar Perforated Supply/Return RFPS/RFPR Steel Removable Face Perforated Supply/Return RFPS/RFPR Available Size Overall Size 233/4” x 233/4” • Steel construction • Removable hinged face for easy access to deflectors • Face can be removed for cleaning • Patented adjustable deflectors provide various directional patterns • Formed steel black back panel RFPS Removable Face Perforated Supply • Accepts 6” through 12” round snap in U.S. Pat. No.
PAGE 70
T-Bar Perforated Supply/Return PDSD Available Size Overall Size 233/4” x 233/4” T-Bar Perforated Supply/Return PDSD Steel Perforated Diffuser Supply (with adjustable deflector) • Perforated steel face • Face adjustable deflectors • Formed steel, black back panel • Fiberglass insulation blanket with foil vapor barrier to minimize condensation • Insulation prescored to accommodate collar size desired • Accepts unique snap-in collar (5400 Series) 6” to 12” – order separately • Available in 14” fixed collar
PAGE 71
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser ART ART Available Sizes 6” x 6”, 9” x 9”, 12” x 12”, 15” x 15”, 21” x 21” Aluminum Note: For 18” x 18” neck, order ARE 18” x 18”. Square and Rectangular T-Bar Diffusers • Aluminum construction • Available in one, two, three and four-way deflections • Removable core • Bright White or Satin Anodized finish SRT SRT Available Sizes 6” x 6”, 9” x 9”, 12” x 12”, 15” x 15” Steel Note: For 18” x 18” neck, order SRE 18” x 18”.
PAGE 72
T-Bar Directional/Modular Diffuser MCDST/MCDSTSR Available Sizes 6” x 6”, 8” x 8”, 10” x 10”, 12” x 12”, 14” x 14”, 16” x 16”, 18” x 18”, 20” x 20” T-Bar Directional/Modular Diffuser MCDST Aluminum Modular Core Diffuser • Extruded aluminum diffuser in aluminum panel • Modular cores provide one, two, three, and four-way air patterns • Removable modules provide easy access to duct-mounted damper • Available in 6” to 20” • Available as MCDSTSR with square-to-round transition attached • Bright White finish M
PAGE 73
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser A500P Steel T-Bar Panel for A500 Series Diffusers A504MS/A504OB Four-way deflection A500P T-Bar Panel Available Size Opening 6” to 14” Overall 233/4” x 233/4” • Adapts A500 diffuser to T-Bar installation • Diffuser snaps in behind panel for clean appearance • Steel panel • Diffuser must be ordered separately • Bright White finish • Diffuser sizes 6”x6” to 14”x14” OB Damper A501MS/A501OB One-way deflection A502MS/A502OB Two-way def
PAGE 74
T-Bar Accessories 6400 Tab Collar 6” • Galvanized steel construction • For use with fiberglassbacked ceiling diffusers • Tabbed for easy installation • Accepts 3800 Series damper T-Bar Accessories 5400 Series Collar Ring* 6400 Series Available Sizes 8” 10” 12” 14” 5400 Series Available Sizes 6” 7” 8” 9” 10” 12” 14”* 16” 18” • Unique snap-in design for easy installation • 2” high collar permits easy flex connections • Bead on collar improves the strength and provides retention for flexible duct connect
PAGE 75
T-Bar Accessories T19 Series Damper • Multi-blade damper • Tabs for easy installation • For use with 5400 Series collar • Bright White finish Note: 3/16 hex operator by 6” 19 Series Available Sizes 8” 10” 12” 14” 16” T-Bar Accessories others RD Radial Damper 6” • Galvanized steel construction • Face-adjustable • For use with round neck diffusers • Mill finish SMF Aluminum Surface Mount Frame RD Available Sizes 8” 10” 12” 14” SMF Available Sizes 12” x 12”, 24” x 12”, 24” x 24”, 24” x 48” • Alumin
PAGE 76
Miscellaneous P Filler Panel • Steel or aluminum construction • Available in 9 sizes from 12” x 12” to 36” x 36” in 12” increments P Filler Panel Available Sizes 12” x 12”, 24” x 12”, 36” x 12”, 48” x 12”, 24” x 24”, 36” x 24”, 48” x 24”, 36” x 36” • Bright White finish Diffusers are factory-installed (must order with diffuser).
PAGE 77
Miscellaneous DT Air Diverter Miscellaneous • Extruded aluminum construction • Two sets of individually adjustable blades • Equalizes flow and controls volume at collar take-offs to registers and grilles • Equipped with gasket around outside of frame for positioning firmly in duct • Mill finish FT Flexiturn • Extruded aluminum construction • Designed to pick up air from the main trunk at branch take-offs and divert it toward the grille • Mounts easily with sheet metal screws • Gang-operated blades move f
PAGE 78
Engineering Data Using the Engineering Data For most of the models & sizes we’ve done the calculations for you. CFM = volume of air flow in cubic feet per minute 421 300 400 500 600 700 800 .006 .010 .016 .022 .031 .040 50 4.5 70 5.0 85 6.5 100 7.5 120 9.0 135 10.0 4.0 6.0 8.0 10.0 11.0 12.5 Noise – an increase in face velocity will create more noise. The tables below show NC design guidelines and also face velocity ranges if NC values have not been tabulated.
PAGE 79
Engineering Data Engineering Data Keeping face velocity low • Returns should be at 400-600 fpm maximum • Filter Returns should be at 450 fpm maximum *ACCA recommends 300 max for filter grilles and 500 max for nonfilter grilles. • The rule of thumb is 2 cfm per square inch of filter size. See table below. • Low velocity reduces noise, especially on stamped face grilles (672/673); fixed-bar grilles can handle more velocity without noise (94A/96AFB/RH45/RHF45/RCB).
PAGE 80
Engineering Data 821, 831, 92 Series and 98VOH (Page 6-8, 11) Deflection C Deflection A 400 500 600 .010 .016 .022 65 80 100 6.5 8.0 10.0 80 100 120 7.0 9.0 11.0 100 120 145 8.0 10.0 12.0 115 145 170 8.5 11.0 13.0 125 155 190 9.0 11.0 14.0 125 155 190 9.0 11.0 14.0 145 185 220 10.0 12.0 15.0 150 190 225 10.0 12.0 15.0 170 210 250 11.0 13.0 16.0 180 220 265 11.0 13.0 16.0 205 255 305 12.0 15.0 17.0 210 265 315 12.0 15.0 18.0 255 315 380 13.0 16.0 19.0 255 320 385 13.0 16.0 19.0 310 385 465 14.0 18.0 21.
PAGE 81
Engineering Data 821, 831, 92 Series and 98VOH (Page 6-8, 11) Deflection G Engineering Data Deflection E Face Velocity Pressure Loss CFM 8x4 Throw Ak .124 CFM 10 x 4 Throw Ak .157 CFM 12 x 4 Throw Ak .190 CFM 14 x 4 Throw Ak .222 CFM 12 x 5 Throw Ak .242 CFM 10 x 6 Throw Ak .244 CFM 14 x 5 Throw Ak .284 CFM 12 x 6 Throw Ak .294 CFM 16 x 5 Throw Ak .325 CFM 14 x 6 Ak .345 Throw CFM 16 x 6 Ak .396 Throw CFM 20 x 5 Ak .408 Throw CFM 24 x 5 Throw Ak .492 CFM 20 x 6 Throw Ak .497 CFM 24 x 6 Throw Ak .
PAGE 82
Engineering Data 94/94A Series Return Air Grilles & Registers (Page 9-10) 96AFB Steel Fixed-Bar Filter Grille (Page 10) 300 45 .010 84 .010 135 .011 96 .011 112 .011 152 .011 198 .011 267 .011 301 .011 336 .011 406 .011 458 .011 511 .011 571 .011 618 .011 690 .011 781 .011 835 .011 946 .011 1057 .011 1284 .011 1341 .011 1633 .010 1751 .009 1992 .008 2742 .008 3808 .008 400 60 .019 112 .019 180 .019 127 .019 150 .019 203 .019 264 .019 355 .020 401 .020 448 .020 541 .020 611 .020 682 .020 761 .020 824 .
PAGE 83
Engineering Data H and V Series (Page 12-16) Deflection C 400 500 600 700 .010 .016 .022 .031 60 80 95 110 6.5 8.0 10.0 12.0 80 100 120 140 7.5 9.5 12.0 13.0 95 120 145 170 8.0 10.0 12.0 14.0 115 140 170 195 9.0 11.0 13.0 15.0 125 155 185 215 9.0 12.0 14.0 16.0 125 155 190 220 9.0 12.0 14.0 16.0 145 180 220 255 10.0 12.0 15.0 18.0 150 190 225 265 10.0 13.0 15.0 18.0 165 210 250 295 11.0 13.0 16.0 19.0 180 225 270 310 11.0 14.0 17.0 19.0 205 255 305 360 11.0 14.0 17.0 20.0 210 265 315 370 12.0 15.0 18.0 21.
PAGE 84
Engineering Data H and V Series (Page 12-16) Deflection E Deflection G 400 500 600 700 800 .010 .016 .022 .031 .040 45 60 70 85 95 2.5 3.5 4.0 5.0 5.5 60 75 90 105 120 3.0 3.5 4.5 5.0 6.0 80 100 120 140 160 4.5 6.0 7.5 8.5 10.0 90 115 140 160 185 5.0 6.5 8.0 9.0 11.0 100 125 150 180 205 5.5 6.5 8.0 9.5 12.0 105 130 155 180 205 5.5 7.5 8.5 9.5 11.0 120 150 180 210 240 6.0 7.5 9.0 10.0 12.0 125 155 185 220 250 6.0 7.5 9.0 11.0 12.0 135 170 205 240 275 6.5 8.0 9.5 11.0 13.0 145 185 220 255 290 6.5 8.5 10.
PAGE 85
Engineering Data C Series Curved-Blade Diffusers Selection Procedure C Series Curved-Blade Diffusers (Page 17-21) One-Way, Two-Way L L Engineering Data 1. Determine the diffuser air pattern best suited to the duct layout and room area to be served. 2. Select the air pattern type and CFM per outlet. The tables give the recommended limits of air volume per outlet for various ceiling heights. Choose the correct table for the style diffuser selected.
PAGE 86
Engineering Data L L S S C Series Three-Way C Series Four-Way 400 500 600 700 800 .010 .016 .022 .031 .040 35 45 55 65 70 9/13 11/17 15/20 17/24 18/26 2.0/2.0 2.5/3.0 3.0/3.5 3.5/4.0 4.0/4.5 40 50 60 70 80 18/11 24/13 28/16 32/19 36/22 2.5/2.0 3.0/2.5 3.5/3.0 4.5/3.5 5.0/4.0 60 75 90 105 120 22/19 27/24 32/29 39/33 44/38 3.0/2.5 3.5/3.0 4.5/4.0 5.0/4.5 6.0.5.0 65 80 95 110 130 31/17 36/22 43/26 50/30 60/35 3.5/2.5 4.0/3.5 5.0/4.0 5.5/4.5 7.0/5.0 70 90 110 125 145 20/25 26/32 32/39 37/44 43/51 2.5/3.0 3.
PAGE 87
Engineering Data Engineering Data RH45, RHD45, RHF45 Registers and Grilles (Page 25) Face Velocity 6x6 CFM Ps Ak .110 CFM 8x8 Ps Ak .240 CFM 12 x 6 Ps Ak .280 CFM 14 x 6 Ps Ak .330 CFM 14 x 8 Ps Ak .460 CFM 12 x 12 Ps Ak .610 CFM 24 x 8 Ps Ak .840 CFM 18 x 12 Ps Ak .950 CFM 30 x 8 Ps Ak 1.070 CFM 24 x 12 Ps Ak 1.290 CFM 18 x 18 Ps Ak 1.460 CFM 30 x 12 Ps Ak 1.630 CFM 20 x 20 Ps Ak 1.820 CFM 36 x 12 Ps Ak 1.980 CFM 24 x 20 Ps Ak 2.210 CFM 30 x 18 Ps Ak 2.500 CFM 24 x 24 Ps Ak 2.670 CFM 36 x 18 Ps Ak 3.
PAGE 88
Engineering Data RE5 Series Return Air Registers and Grilles (Page 23) RH90 Registers and Grilles (Page 26) 400 50 .012 103 .011 119 .011 141 .011 195 .011 256 .011 348 .010 395 .010 441 .010 535 .010 605 .010 676 .010 755 .010 818 .010 914 .010 1034 .010 1106 .009 1252 .009 1399 .009 1697 .009 1773 .009 2154 .009 2308 .009 2621 .009 3588 .009 4946 .008 500 63 .019 129 .018 148 .018 177 .018 244 .018 320 .017 435 .017 493 .016 552 .016 668 .016 756 .016 845 .016 943 .016 1023 .015 1142 .015 1292 .
PAGE 89
Engineering Data Engineering Data TG, TGF Transfer Grilles (Page 27) Face Velocity* CFM 8x8 Ak .440 Ps CFM 14 x 6 Ak .550 Ps CFM 12 x 8 Ak .640 Ps CFM 14 x 8 Ak .740 Ps CFM 20 x 6 Ak .780 Ps CFM 12 x 12 Ak .930 Ps CFM 30 x 6 Ak 1.120 Ps CFM 16 x 12 Ak 1.190 Ps CFM 18 x 12 Ak 1.330 Ps CFM 20 x 12 Ak 1.460 Ps CFM 16 x 16 Ak 1.540 Ps CFM 24 x 12 Ak 1.750 Ps CFM 18 x 18 Ak 1.950 Ps CFM 30 x 12 Ak 2.170 Ps CFM 20 x 20 Ak 2.420 Ps CFM 24 x 18 Ak 2.550 Ps CFM 30 x 18 Ak 3.230 Ps CFM 24 x 24 Ak 3.
PAGE 90
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Four-Way Square 500 .020 50 2-3/2-3 110 2-4/2-4 200 3-5/3-5 310 4-6/4-6 450 4-8/4-8 615 5-9/5-9 800 5-11/5-11 1010 6-12/6-12 1370 7-13/7-13 600 700 800 900 1000 1200 1400 .020 .030 .040 .050 .060 .090 .
PAGE 91
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Engineering Data Three-Way Style 3 Face Velocity Pressure Loss CFM 6x6 Ak .100 Throw X/Y CFM 9x9 Ak .220 Throw X/Y CFM 12 x 12 Ak .400 Throw X/Y CFM 15 x 15 Ak .620 Throw X/Y CFM 18 x 18 Ak .900 Throw X/Y CFM 21 x 21 Ak 1.230 Throw X/Y CFM 24 x 24 Ak 1.600 Throw X/Y CFM 27 x 27 Ak 2.020 Throw X/Y 500 .020 50 2-4/1-2 110 2-4/2-3 200 4-7/2-5 310 4-8/2-4 450 4-9/3-5 615 5-11/3-6 800 7-14/5-9 1010 7-13/4-9 600 .
PAGE 92
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Two-Way Corner Style 2C 900 .050 80 3-7/3-7 175 6-10/6-10 315 8-13/8-13 495 10-16/10-16 700 12-19/12-19 975 15-23/15-23 1270 17-27/17-27 1585 19-29/19-29 1000 .060 90 5-8/5-8 195 6-11/6-11 350 9-14/9-14 550 11-18/11-18 780 14-22/14-22 1080 17-28/17-28 1410 19-29/19-29 1760 21-33/21-33 1200 .
PAGE 93
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Engineering Data Two-Way Style 2L Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw Y CFM 12 x 6 Ak .170 Throw Y CFM 15 x 6 Ak .220 Throw Y CFM 12 x 9 Ak .260 Throw Y CFM 15 x 9 Ak .320 Throw Y CFM 18 x 9 Ak .390 Throw Y CFM 21 x 9 Ak .450 Throw Y CFM 15 x 12 Ak .430 Throw Y CFM 18 x 12 Ak .520 Throw Y CFM 21 x 15 Ak .760 Throw Y CFM 24 x 15 Ak .870 Throw Y CFM 21 x 18 Ak .910 Throw Y CFM 27 x 21 Ak 1.
PAGE 94
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Two-Way Style 2 500 .020 45 3-5 95 5-7 175 4-7 275 8-12 390 9-15 540 11-17 705 12-19 880 12-20 600 .020 55 3-5 115 6-8 210 6-9 330 10-14 470 11-17 650 14-20 845 14-22 1055 15-23 700 .030 60 4-7 135 6-8 245 9-13 385 10-15 545 12-18 760 15-23 990 17-25 1230 18-26 800 .040 70 4-7 155 6-9 280 10-15 440 12-18 625 14-20 865 18-26 1130 20-30 1410 21-31 900 .
PAGE 95
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Engineering Data One-Way Style 1L Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw CFM 12 x 6 Ak .170 Throw CFM 15 x 6 Ak .220 Throw CFM 12 x 9 Ak .260 Throw CFM 15 x 9 Ak .320 Throw CFM 18 x 9 Ak .390 Throw CFM 15 x 12 Ak .430 Throw CFM 18 x 12 Ak .520 Throw CFM 21 x 15 Ak .760 Throw CFM 24 x 15 Ak .870 Throw CFM 21 x 18 Ak .910 Throw CFM 27 x 21 Ak 1.380 Throw 500 .
PAGE 96
Engineering Data ASR Square Supply Return Diffuser — Aluminum (Page 35) Four-Way Square Face Velocity Pressure Loss 600 .020 700 .030 90 .01 2-4/2-4 <30 105 .02 2-4/2-4 <30 120 .02 3-5/3-5 <30 CFM 9x9 Grid Core -Ps NC Ak .340 65 <.01 <30 80 <.01 <30 90 <.01 <30 Face Velocity Pressure Loss 500 .020 600 .020 700 .030 200 .01 3-5/3-5 <30 240 .02 4-6/4-6 <30 280 .02 4-8/4-8 <30 150 .01 <30 180 .02 <30 210 .02 <30 500 .020 600 .020 700 .030 250 .01 3-5/3-5 <30 300 .02 4-6/4-6 <30 350 .
PAGE 97
Engineering Data ASR Square Supply Return Diffuser — Aluminum (Page 35) Four-Way Square Engineering Data Face Velocity Pressure Loss 500 .020 600 .020 700 .030 560 .01 3-5/3-5 <30 675 .02 3-5/3-5 <30 785 .02 4-8/4-8 <30 CFM 18 x 18 Grid Core -Ps Ak 1.600 NC 345 <.01 <30 505 <.01 <30 590 <.01 <30 Face Velocity Pressure Loss 500 .020 600 .020 700 .030 635 .01 3-7/3-7 <30 765 .02 4-8/4-8 <30 890 .02 4-10/4-10 <30 CFM 21 x 21 Grid Core -Ps Ak 2.100 NC 475 <.01 <30 575 <.01 <30 665 <.
PAGE 98
Engineering Data MCD Modular Ceiling Diffuser — Aluminum (Page 36, 37, 71) Two Way 500 .020 45 2-5/2-5 <20 80 3-6/3-6 <20 130 3-8/3-8 <20 190 5-9/5-9 <20 260 5-11/5-11 <20 350 6-12/6-12 <20 450 6-14/6-14 <20 555 8-15/8-15 <20 665 8-17/8-17 <20 600 700 800 .020 .030 .
PAGE 99
Engineering Data MCD Modular Ceiling Diffuser — Aluminum (Page 36, 37, 71) Engineering Data Four-Way Face Velocity Pressure Loss CFM 6x6 Throw X/Y Ak .090 NC CFM 8x8 Throw X/Y Ak .150 NC CFM 10 x 10 Throw X/Y Ak .250 NC CFM 12 x 12 Throw X/Y Ak .370 NC CFM 14 x 14 Throw X/Y Ak .520 NC CFM 16 x 16 Throw X/Y Ak .700 NC CFM 18 x 18 Throw X/Y Ak .900 NC CFM 20 x 20 Throw X/Y Ak 1.100 NC CFM 22 x 22 Throw X/Y Ak 1.330 NC 500 .
PAGE 100
Engineering Data SS Spiral Diffuser (Page 39) See notes on next page and see page 39 for min. duct diameter. 1/2” wide slot–nonducted " wide slot - nonducted 7 10 13 17 20 1-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .002 7-4-2 <15 .003 11-6-4 <15 .006 15-7-5 <15 .009 19-9-6 <15 .016 22-11-7 <15 10 17 23 30 37 43 2-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .001 6-3-2 <15 .002 9-5-3 <15 .
PAGE 101
Engineering Data SS Spiral Diffuser (Page 39) Notes: Engineering Data 1. Tests conducted in accordance with ANSI/ASHRAE 70-1991 at isothermal conditions. 2. Engineering Units: Airflow Rate = CFM/linear foot Static Pressure = in. w.c. Throw = ft. at 50, 100, and 150 FPM terminal velocity 3. Noice Criteria is based on 10 dB room absorption (Re: 1012 watts) evaluated at 125 through 4000 Hz octave bands. 4. Throw data are based on a horizontal discharge in one direction only.
PAGE 102
Engineering Data SV and SVH Spiral Diffusers USV, USVH Universal Spiral Diffusers (Page 38-39) See page 39 for min. duct diameter. 600 .066 84 10-6 108 11-8 126 12-8 150 13-9 234 17-11 312 19-13 20 378 21-14 20 396 22-15 21 426 23-15 21 528 25-17 22 588 26-18 23 666 28-19 23 810 31-21 24 894 32-22 24 1092 36-25 25 1374 41-28 26 1650 44-30 27 700 .
PAGE 103
Engineering Data L Series (Page 40-42) Engineering Data NOTES: 1. Table 1 based on up to 4-foot grille length. For longer lengths, correct throw and NC per Table 2. 2. When using continuous grille lengths with alternate active and inactive sections, a reduction in throw can be obtained by omitting the factors contained in Table 2. 3. Bar style 30 and 0 Increase Table 1 NC + 5 NC 4. Supply air temperature effect on horizontal throw is shown in Table 3.
PAGE 104
Engineering Data L Series (Page 40-42) Table 2 - Continuous Grille Length Factors Table 5 - Supply Grille Areas (per foot of length) Modify Table 1 by listed values for grille lengths above 4 feet. Grille Length in Feet NC +0 +5 +10 An 2 .17 2 .21 3 .25 4 .33 5 .42 Listed Width in Inches 6 8 10 12 14 16 18 20 24 30 36 .50 .67 .84 1.00 1.20 1.30 1.50 1.70 2.00 2.50 3.00 Ak .04 .06 .09 .11 .16 .20 00 and 15 Bar Styles .25 .35 .45 .55 .68 .79 .90 1.00 1.30 1.60 2.10 Ak .03 .05 .08 .
PAGE 105
Engineering Data S Series (Page 43-47) T T T VT VT T VK VK VK VT VT VK Engineering Data 6' 2-1/2' VR 6' 6' VR SIDEWALL SILL VR CEILING ONE WAY CEILING TWO WAY Table 1 - Supply Air Type 50 ( " Slot) Throw (T) in Feet CFM/Ft of total Slot length 10 20 30 40 50 60 70 80 90 100 120 140 160 180 200 104 6' VR Number of Slots 1 2 1 2 3 1 2 3 4 2 3 4 5 3 4 5 6 3 4 5 6 7 3 4 5 6 7 4 5 6 7 8 4 5 6 7 8 9 5 6 7 8 9 10 6 7 8 9 10 7 8 9 10 8 9 10 8 9 10 9 10 Min. P s in H 2 O .
PAGE 106
Engineering Data S Series (Page 43-47) Table 1 - Supply Air Type 75 ( " Slot) Throw (T) in Feet CFM per Foot 20 30 40 50 60 70 80 90 100 120 140 160 180 200 250 1 1 2 1 2 3 1 2 3 4 2 3 4 5 2 3 4 5 2 3 4 5 6 3 4 5 6 7 3 4 5 6 7 3 4 5 6 7 4 5 6 7 8 5 6 7 8 9 6 7 8 9 10 6 7 8 9 10 6 7 8 9 10 8 9 10 Min. P s in H 2 O .01 .04 <.01 .09 .02 <.01 .16 .04 .02 .01 .06 .03 .02 <.01 .09 .04 .02 .01 .13 .06 .03 .02 .01 .07 .04 .03 .02 <.01 .09 .05 .03 .02 .01 .13 .06 .04 .03 .02 .09 .06 .04 .03 .02 .08 .
PAGE 107
Engineering Data S Series (Page 43-47) Table 1 - Supply Air Type 10 (1" Slot) Throw (T) in Feet Engineering Data CFM per Foot 20 30 40 50 60 70 80 90 100 120 140 160 180 200 250 300 350 106 Number of Slots 1 1 2 1 2 1 2 3 2 3 4 2 3 4 2 3 4 5 3 4 5 6 3 4 5 6 3 4 5 6 7 4 5 6 7 8 4 5 6 7 8 9 5 6 7 8 9 10 5 6 7 8 9 10 6 7 8 9 10 7 8 9 10 8 9 10 Min. P s in H 2 O .02 .03 .02 .06 .03 .09 .04 .02 .06 .03 .02 .09 .04 .02 .11 .05 .03 .02 .06 .04 .02 .02 .08 .04 .03 .02 .11 .06 .04 .03 .02 .09 .05 .
PAGE 108
Engineering Data S Series (Page 43-47) Type 50 Supply Diffuser Areas per Foot of Length Ak Area An Area 1 .02 .08 2 .03 .17 3 .05 .25 4 .07 .33 No. of Slots 5 6 .09 .10 .42 .50 7 .12 .58 8 .14 .67 9 .15 .75 10 .17 .84 8 .19 .96 9 .21 1.10 10 .23 1.20 8 .24 1.33 9 .27 1.50 10 .30 1.67 Type 75 Supply Diffuser Areas per Foot of Length Ak Area An Area 1 .03 .12 2 .05 .24 3 .07 .36 4 .09 .48 No. of Slots 5 6 .12 .14 .60 .72 7 .16 .
PAGE 109
Engineering Data DL Drum Louver (Page 48) 6-Inch Neck Area Outlet* Velocity Static Pressure (Ft2) Total Pressure CFM .16 .375 6x9 Throw CFM .21 .500 6 x 12 Throw CFM .32 .750 6 x 18 Throw CFM .41 1.000 6 x 24 Throw CFM 6 x 30 .52 1.250 Throw CFM 6 x 36 .62 1.500 Throw CFM 2.000 6 x 48 .83 Throw CFM 2.500 6 x 60 1.05 Throw Data based on 8dB room atenuation 800 .007 .039 128 6-7-13 168 8-10-18 256 10-14-23 328 12-17-28 416 15-20-33 496 17-23-37 664 20-26-41 840 22-29-45 1000 .010 .
PAGE 110
Engineering Data DL Drum Louver (Page 48) 12-Inch Outlet* Velocity Static Pressure (Ft2) Total Pressure CFM 12 x 20 .70 1.670 Throw CFM 12 x 30 1.05 2.500 Throw CFM 12 x 40 1.40 3.330 Throw CFM 12 x 50 1.75 4.160 Throw CFM 12 x 60 2.15 5.000 Throw CFM 12 x 70 2.50 5.830 Throw Data based on 8dB room atenuation 800 .007 .039 560 10-20-35 840 17-25-42 1120 20-28-49 1400 22-29-56 1720 25-33-61 2000 28-37-68 1000 .010 .
PAGE 111
Engineering Data Stationary Louvers 245ZC, 245ZF (Page 51) 1530ZC, 1530ZF (Page 50) 12 18 24 30 36 42 48 54 60 66 72 78 84 90 12 0.37 0.60 0.84 1.07 1.31 1.54 1.78 2.01 2.25 2.48 2.72 2.95 3.19 3.42 18 0.58 0.96 1.33 1.70 2.07 2.45 2.82 3.19 3.56 3.93 4.31 4.68 5.05 5.42 24 0.80 1.31 1.82 2.33 2.84 3.35 3.86 4.37 4.88 5.39 5.90 6.41 6.92 7.43 30 36 42 0.98 1.19 1.41 1.60 1.96 2.31 2.23 2.72 3.21 2.85 3.48 4.11 3.48 4.24 5.01 4.10 5.00 5.91 4.72 5.77 6.81 5.35 6.53 7.70 5.97 7.29 8.60 6.60 8.05 9.
PAGE 112
Engineering Data 4-Way Rezzin TBar Diffuser (Page 60) 6" 10" 12" 14" 500 98 .005 .024 175 .014 .030 273 .014 .029 393 .022 .038 535 .023 .037 - 600 118 .006 .034 209 .021 .043 327 .021 .042 471 .032 .054 641 .033 .053 - Neck Velocity FPM 700 800 900 1000 1200 1400 1600 137 157 177 196 236 275 314 .008 .011 .013 .016 .023 .031 .041 .046 .060 .076 .094 .134 .183 .238 15 22 26 31 244 279 314 349 419 489 559 .028 .037 .046 .057 .082 .111 .145 .058 .076 .096 .118 .170 .231 .
PAGE 113
Engineering Data Rezzin Modular Core Tbar Diffuser (Page 60) Engineering Data Throw Data - Terminal Velocity of 75 FPM 400 79 3.5 4.5 0.9 1.2 0.6 500 98 4.4 5.6 1.1 1.5 0.8 600 118 5.3 6.8 1.3 1.8 0.9 700 137 6.2 7.9 1.5 2.1 1.1 800 157 7.1 9.0 1.7 2.5 1.2 900 1000 1200 1400 1600 177 196 236 275 314 7.9 8.8 10.6 12.4 14.1 10.2 11.3 13.6 15.8 18.1 2.0 2.2 2.6 3.0 3.5 2.8 3.1 3.7 4.3 4.9 1.4 1.5 1.8 2.1 2.
PAGE 114
Engineering Data Rezzin Square Ceiling Diffuser (Page 61) RH]]LQ 6TXDUH (two-way corner) 300 60 0.002 2.5 2.5 1.5 82 0.009 4.0 3.5 2.5 105 0.016 5.0 4.5 3.0 CFM Ps Throw Throw Throw CFM Ps Throw Throw Throw CFM Ps Throw Throw Throw 400 80 0.004 3.5 3.0 2.0 109 0.016 5.0 4.5 3.0 140 0.029 6.5 6.0 4.0 500 100 0.006 4.0 4.0 2.5 136 0.025 6.0 5.5 4.0 175 0.045 8.0 7.5 5.0 600 120 0.008 5.0 4.5 3.0 164 0.037 7.5 7.0 4.5 209 0.065 9.5 9.0 6.0 700 135 0.011 6.0 5.5 3.5 191 0.050 8.5 8.0 5.5 244 0.088 11.0 10.
PAGE 115
Engineering Data Engineering Data 659T/659TI/PFT/PFTI Series Performance (Page 53, 56) Average Face Velocity 659T CFM Ak 2.440 -Ps PFT CFM Ak 2.740 -Ps 659-TI w/12" collar CFM Ak 2.230 -Ps w/14" collar CFM Ak 2.260 -Ps w/16" collar CFM Ak 2.320 -Ps PFTI w/12" collar CFM Ak 2.320 -Ps w/14" collar CFM Ak 2.590 -Ps w/16" collar CFM Ak 2.630 -Ps 300 400 500 600 730 975 1220 1465 .017 .030 .047 .067 820 1095 1370 1645 .028 .050 .078 .113 670 .084 680 .060 695 .039 Neck Velocity CFM 6" Diameter Ps NC Ak .
PAGE 116
Engineering Data RENPS, ARENPS, PDS (Page 65, 68) REN4 (Page 59) Neck Velocity 6" Diameter Ak .430 8" Diameter Ak .530 12" Diameter Ak .700 14" Diameter Ak .750 180 35 .002 <20 3.0 65 .002 <20 4.0 100 .003 <20 4.0 140 .005 <20 4.5 190 .007 <20 4.5 220 45 .003 <20 3.5 75 .003 <20 5.0 120 .005 <20 5.5 175 .007 <20 5.5 235 .011 <20 5.5 300 60 .004 <20 4.5 105 .006 <20 6.0 165 .009 <20 7.0 235 .013 <20 7.0 320 .020 <20 7.0 350 70 .006 <20 5.5 120 .008 <20 7.0 190 .011 <20 8.0 275 .018 <20 8.0 375 .
PAGE 117
Engineering Data Probe Position: The probe is held 1 inch in from the outer edge of the diffuser, flush with the face. Engineering Data PROBE POSITION Four-Way (Short Throw) • For throw in all four directions, use short throw data. 1 2 3 4 Three-Way (Short Throw) • For throw in all three directions, use short throw data. 1 2 3 4 Three-Way (Long & Short) • For throw in the #2 & #4 direction use long throw data. 1 2 3 4 • For throw in the #1 & #3 directions, use short throw data.
PAGE 118
Engineering Data CBPS Supply (Page 66) One-Way Supply 300 60 .060 2.5-4.0-5.0 <20 105 .080 4.0-6.0-7.0 <20 165 .080 4.5-7.0-8.5 <20 235 .080 5.5-8.5-10.0 <20 325 .110 4.5-7.0-8.5 <20 420 .020 5.0-8.0-10.0 <20 400 80 .080 3.5-5.0-6.0 <20 140 .110 5.5-8.0-9.5 <20 220 .110 6.5-9.5-11.5 <20 315 .110 7.5-11.0-13.5 20 430 .140 6.5-9.5-11.5 20 560 .040 7.0-10.0-12.0 <20 500 100 .100 4.0-6.0-7.0 <20 175 .160 6.5-10.0-12.0 21 275 .170 8.0-12.0-14.5 23 395 .170 9.5-14.0-17.0 25 535 .210 8.0-12.0-14.5 25 700 .
PAGE 119
Engineering Data CBPS Supply (Page 66) Engineering Data Four-Way Supply Neck Size CFM Ps 6" Throw NC CFM Ps 8" Throw NC CFM Ps 10" Throw NC CFM Ps 12" Throw NC CFM Ps 14" Throw NC CFM Ps 16' Throw NC 300 400 60 <.010 1.5-2.0-2.5 <20 105 <.010 1.5-2.5-3.0 <20 165 0.01 3.0-4.0-5.0 <20 235 .010 2.5-3.5-4.0 <20 325 .010 2.0-3.0-3.5 <20 420 .020 3.0-4.0-5.0 <20 500 80 .010 1.5-2.5-3.0 <20 140 .010 2.0-3.0-4.0 <20 220 .020 3.5-5.5-6.5 <20 315 .020 3.0-4.5-5.5 <20 430 .020 2.5-4.0-5.0 <20 560 .040 4.0-6.
PAGE 120
Engineering Data Screw Hole Location Chart 92 Series, 94 Series, 98 Series 821, 831 Engineering Data 119
PAGE 121
Engineering Data Engineering Data Screw Hole Chart for Extruded Aluminum Line V Series, H Series, C Series, RH Series 120
PAGE 122
Engineering Data 821, 831, 92 Series, 98VOH, H and V Series Drop Chart, Use with size selection charts Instructions for use of Drop Chart Example: The drop for a 92 Series register “C” deflection 16x5 size has an 800 fpm velocity and a 16 foot throw. Connect these two points on the chart and read the drops as follows: Engineering Data The drop of the air stream is determined by using the throw and velocity of the register selected. On the drop chart, lay a straight edge connecting these values.
PAGE 123
Engineering Data 92 Series, H and V Series Alternate Sizing Graph Grille Width in Inches Engineering Data Method of Determining Alternate Grille Sizes Extensive tests indicate that by varying dimensions of a grille there is no appreciable effect on the air throw, provided the same area is maintained. To change the dimensions of a grille, place a straight edge across the width and height scales on dimensions as selected from charts.
PAGE 124
Suggested Specifications Surfaire® T-Bar Diffusers Back panel shall be formed galvanized steel covered with glass fiber insulation and an aluminum foil vapor barrier. Insulation is held securely in place by face margin edge fold over. Insulation will be prescored to accept specified collar sizes. 5400 Series collars will be supplied providing efficient, tight attachment with bayonet fasteners to mating prepunched holes in back panel. Collars will provide flex duct locking tabs and damper mounting slots.
PAGE 125
Glossary of Terms Ceiling or Wall Effect The tendency of an air stream moving along a wall or ceiling surface to remain in contact with that surface. Glossary of Terms Engineering Data Core Area The total plane area of that portion of a grille, face, or register bounded by a line tangent to the outer opening through which air can pass. The core area is less than the register size. Example, a 14-in. x 8-in. register may have a core that is 1 in. less than the listed size; so, the core area is 13in. x 7in.
PAGE 126
Alpha-Numeric Index Product Information Steel—Panel Extruded Aluminum Face ............................................................72 Damper ..............................................................................................................75 Aluminum - Detachable Plate Diffuser Fixed Collar ..........................................64 ...................... 115 Square Two-Core Face Fixed Collar with molded R6 Insulation Option ...........62 ......................
PAGE 127
Alpha-Numeric Index Alpha-Numeric Index Product Information 126 MFB P Panel PD PDF PDR PDS PDSD PFT PFTI PFG RCB/RCBD RCBF RCBFT RCBT RD RE5 RE5T RE5TI RED5 REF5 REF5T REF5TI REN4 RENP RENPS RFPR RFPS RH45 RH45T RH90 RHD90 RHF45 RHD45 RHF45T RZ-Round RZ-Square Back Panel Mod Core Egg Crate Sq to Rd 4-Way Tbar S SBP SCBPS SMF SR SR/AR SR6 SR7 SRT SR/AR SRET/SRET R6 SRE Engineering Data Molded Fiberglass Back Features .....................................................................54 Filler Panel .
PAGE 128
Alpha-Numeric Index Product Information Directional, Step Frame .....................................................................................30 ........................ 89 Linear Face Diffuser ...........................................................................................39 ........................ 99 Single-Deflection Diffuser ..................................................................................38 ...................... 101 Double-Deflection Diffuser.......................
PAGE 129
hartandcooley.com Hart & Cooley Inc 5030 Corporate Exchange Blvd. SE Grand Rapids, MI 49512 P (800) 433-6341 F (800) 223-8461 hartandcooley.com CHECKOUT OUR NEW WEBSITE! HARTANDCOOLEY.
PAGE 130
Hart & Cooley is proud to be an HCI brand 5030 Corporate Exchange Blvd. SE Grand Rapids, MI 49512 P (800) 433-6341 F (800) 223-8461 hartandcooley.com Offered by, ©2014 Hart & Cooley, Inc. Form No.