Brochure

ManualsBrandsHart & Cooley ManualsCommercial Registers & Grilles16" x 6" (Wall Opening Size) White Commercial Supply Register (821 Series)

Light

Commercial

Grilles,

Registers &

Diffusers

Edition 5

See

Inside

Front

Cover For

What’s New...

Summary of content (128 pages)

PAGE 1
Light Commercial Grilles, Registers & Diffusers Edition 5 See Inside Front Cover For What’s New...
PAGE 2
Order information: To order Hart & Cooley products, please contact any authorized Hart & Cooley distributor or call 800.433.6341. What’s New... When you purchase Hart & Cooley products, you also receive the full support of Hart & Cooley technical and customer service. Technical and customer service: 800.433.6341 toll-free 616.656.8200 phone 800.223.8461 toll-free fax 616.656.6399 fax Internet address: http://www.hartandcooley.
PAGE 3
Table of Contents Table of Contents LIGHT COMMERCIAL Product Engineering Information Data LIGHT COMMERCIAL CONSTRUCTION FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 . . . . . . . . . . . . .0 REGISTERS & GRILLES—STEEL 821 Vertical Single Deflector, w/MS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 831 Horizontal Single Deflector, w/MS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 92HVO Double Deflector Horizontal Face . . . . . . .
PAGE 4
Table of Contents Table of Contents LIGHT COMMERCIAL Product Information CEILING DIFFUSERS—STEEL 20 Round Adjustable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 18 Duct Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 19 Round OB Damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 24 Steel Square (Ceiling) Diffuser . . . . . . . . . . . . . . . . . . . . . .
PAGE 5
Table of Contents Product Information Table of Contents T-BAR GRILLES & DIFFUSERS Engineering Data T-BAR CONSTRUCTION FEATURES” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 T-BAR RETURN AIR FILTER GRILLES 659T Steel—Lanced Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 659TI Steel—Lanced Face with Fiberglass Back . . . . . . . . . . . . . . . . . . . . . . . . .53 673T Steel—Filter Grille . . . . . . . . . . . . . . .
PAGE 6
Table of Contents Table of Contents T-BAR GRILLES & DIFFUSERS FBR SBP RFPS RFPR PDS/PDSD PDR PD PDF Product Information Steel—Stamped Curved Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Steel—Perforated Face Shallow Back . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Steel—Perforated Face with Directional Deflector . . . . . . . . . . . . . . . . . . .66 Steel—Perforated Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
Light Commercial Construction Features Light Commercial Construction Features Light Commercial Registers, Grilles & Diffusers Your reputation, and your success, Reputations are built on hard work every installation, every product you Hart & Cooley products are is on the line with every customer, use. You can protect your good name by using ours.
PAGE 8
Registers & Grilles - Steel 821 Registers & Grilles - Steel • All-steel construction • Vertical adjustable face bars • Horizontal multi-shutter valve • Bright White finish HT 4 5 6 8 10 12 14 16 18 20 24 6 X 8 X X X X 821 Available Sizes (in.) WIDTH 10 12 14 16 18 20 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 24 X 30 X 36 X X X X X X X X X X X X X X X X X X X X Contact factory for sizes not listed.
PAGE 9
Registers & Grilles - Steel 92HVO Grille All-steel construction Adjustable face bars may be set to any desired deflection Horizontal front bars Vertical second bars Larger sizes available in multiple-piece construction Bright White finish HT Note: Screw hole location details on page 117 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 6 X X X 8 X X X X 10 X X X X X 12 X X X X X X 92HVO Available Sizes (in.
PAGE 10
Registers & Grilles - Steel 92VHO Grille Registers & Grilles - Steel • • • • • • All-steel construction Vertical front bars Horizontal second bars Adjustable face bars may be set to any desired deflection Larger sizes available in multiple-piece construction Bright White finish HT Note: Screw hole location details on page 117 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 6 X X X 8 X X X X 10 X X X X X 12 X X X X X X 92VHO Available Sizes (in.
PAGE 11
Registers & Grilles - Steel 94 Grille HT Note: Screw hole location details on page 117 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 6 X X X 8 X X X X 10 X X X X X 12 X X X X X X 94 Available Sizes (in.
PAGE 12
Registers & Grilles - Steel 94A Grille (No Damper) Registers & Grilles - Steel • All-steel construction • 3/4" spaced fins set at 35°, horizontal face bars set at 35° • Larger sizes available in multiple-piece construction • Also available as 94AT T-Bar Return Grille (see page 57) • Bright White finish HT 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 6 X X X 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 94A Available Sizes (in.
PAGE 13
Registers & Grilles - Steel 98VOH Ventilation Grille 98VOHP Ventilation Grille Detail of optional pulley (98VOHP) for remote adjustment of deflection louvers. Field-installed center pulley over lever. 12 X X X X 14 X X X X X 98VOH Available Sizes (in.
PAGE 14
Registers & Grilles - Aluminum Registers & Grilles - Aluminum HX Grille Note: Screw hole location details on page 117 • Extruded aluminum construction • Horizontal front bars • Single row of individually adjustable horizontal face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish HD Register Note: Screw hole location details on page 117 12 • Extruded aluminum construction • Single row of individually adjustable horizontal face bars • Pivoted bars for easy positive
PAGE 15
Registers & Grilles - Aluminum HM Register Extruded aluminum construction Single row of individually adjustable horizontal face bars Pivoted bars for easy positive setting Lever-operated, multi-shutter valve Bright White or Satin Anodized finish HT 6 8 10 4 X X X 5 X X X 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 Note: Screw hole location details on page 117 HM Available Sizes (in.
PAGE 16
Registers & Grilles - Aluminum HVD Register Registers & Grilles - Aluminum • Extruded aluminum construction • Two rows of individually adjusted face bars for horizontal and vertical deflection • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized finish Note: Screw hole location details on page 117 HT 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 HVD Availa
PAGE 17
Registers & Grilles - Aluminum VD Register Extruded aluminum construction Vertical front bars Single row of individually adjustable face bars Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized finish Note: Screw hole location details on page 117 HT 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 16 X X X X X X X X 18 X X X X X X X X X VD Available Sizes (in.
PAGE 18
Registers & Grilles - Aluminum VH Grille Registers & Grilles - Aluminum • • • • • • Extruded aluminum construction Vertical front bars Horizontal second bars Two rows of individually adjusted face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Bright White or Satin Anodized finish Note: Screw hole location details on page 117 VHD Register • • • • • • • HT 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22
PAGE 19
Registers & Grilles - Aluminum CH 1 Grille Note: Screw hole location details on page 117 CHD1 Register • Extruded aluminum construction • One-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized finish Note: Screw hole location details on page 117 CHM1 Register • Extruded aluminum construction • One-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Mu
PAGE 20
Registers & Grilles - Aluminum CH2 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Two-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 117 CHD2 Register • Extruded aluminum construction • Two-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized fi
PAGE 21
Registers & Grilles - Aluminum C3 Grille Note: Screw hole location details on page 117 CD3 Register • Extruded aluminum construction • Three-way deflection • Individually adjustable curvedface bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized finish Note: Screw hole location details on page 117 CM3 Register • Extruded aluminum construction • Three-way deflection • Individually adjustable curvedface bars • Pivoted bars for easy positive setting • Multi
PAGE 22
Registers & Grilles - Aluminum C4 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Four-way deflection • Individually adjustable curvedface bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 117 CD4 Register • Extruded aluminum construction • Four-way deflection • Individually adjustable curvedface bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized fini
PAGE 23
Registers & Grilles - Aluminum CH2CL Grille Note: Screw hole location details on page 117 CH2CR Grille • Extruded aluminum construction • Two-way deflection • Individually adjustable curvedface bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 117 Engineering Data on Page 82 6 8 10 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 CH2CL Available Sizes (in.
PAGE 24
Registers & Grilles - Aluminum RCB Grille RCBD Register Registers & Grilles - Aluminum • • • • Extruded aluminum construction Curved blades fixed on one-inch spacing Opposed-blade damper Bright White or Satin Anodized finish RCB, RCBD Available Sizes (in.
PAGE 25
Registers & Grilles - Aluminum RE5 Grille All-aluminum construction Grid core 1/2" x 1/2" x 1/2" Square core design with extruded aluminum frame Bright White or Mill finish HT 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 16 X X X X X X X X RE5 Available Sizes (in.
PAGE 26
Registers & Grilles - Aluminum REF5 Filter Grille, Grid Core Registers & Grilles - Aluminum • • • • • All-aluminum construction 1/2" x 1/2" x 1/2" square core design Accommodates standard 1" thick disposable filter (not included) Filter grilles equipped with knurled knob fasteners Bright White or Mill finish HT 6 8 10 12 4 X X X X 5 X X X X 6 X X X X 8 X X X 10 X X 12 X 14 16 18 20 22 24 25 26 28 30 32 34 36 REF5 Available Sizes (in.
PAGE 27
Registers & Grilles - Aluminum RHD45 Register Extruded aluminum construction Horizontal bars at 45 degrees Face bars permanently fixed into heavy aluminum frames at a 45-degree angle Opposed-blade damper Bright White or Satin Anodized finish HT 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 RHD45 Available Sizes (in.
PAGE 28
Registers & Grilles - Aluminum RH90 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Face bars permanently fixed into heavy aluminum frames at a 90-degree angle from face • Bright White or Satin Anodized finish HT 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 4 X X X X 6 X X X X 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 16 X X X X X X X X RH90 Available Sizes (in.
PAGE 29
Registers & Grilles - Aluminum TG Transfer Grille Extruded aluminum construction Vision proof Inverted "Y" type grille bar for best vision proof quality and airflow Excellent for installation in doors or partitions Bright White or Satin Anodized finish Registers & Grilles - Aluminum • • • • • TGF Transfer Grille Frame • Extruded aluminum construction Note: When framing both sides of the door or partition opening, use the TGF frame with the TG Grille. Adjustable from 1" to 21/8" door thickness.
PAGE 30
Ceiling Diffusers - Steel 20 Round Diffuser 20 Available Sizes (in.
PAGE 31
Ceiling Diffusers - Steel 24 Square Ceiling Diffuser • All-steel construction • Step-down face deflects air stream 360 degrees • Bright White finish 21 Installation Frame • All-steel construction • Golden Sand enamel finish • Used but not furnished with #24 ceiling diffusers. Ceiling Diffusers - Steel Only available in sizes shown. 24 Ceiling Diffuser (in.) Free Area No. of Size Sq.
PAGE 32
Ceiling Diffusers - Steel SRE Diffuser • • • • Steel construction Removable core Flat (extended) margin style Optional factory-mounted opposed-blade damper available as SRED • Bright White enamel finish HT 6 9 12 15 18 21 24 Ceiling Diffusers - Steel See page 34 for available air patterns. Steel construction Removable core Beveled (step-down) margin style Optional factory-mounted opposedblade damper available as SRSD • Bright White enamel finish See page 34 for available air patterns.
PAGE 33
Ceiling Diffusers - Steel SR6 Control Grid • • • • Steel construction Field-mounts on diffuser Used to control airflow at the diffuser Mill finish HT 6 9 12 15 18 21 24 SR6 Available Sizes (in.) WIDTH 6 9 12 15 18 21 X X X X X X X X X X X X X X X X X X X X X 24 X X X X X X X Ceiling Diffusers - Steel 6 SR7 Volume Damper • Steel construction • Used to control airflow at the diffuser • Mill finish • Duct-mount only HT 6 9 12 15 18 21 24 SR7 Available Sizes (in.
PAGE 34
Ceiling Diffusers - Aluminum ARE Diffuser ARE Available Sizes (in.
PAGE 35
Ceiling Diffusers - Aluminum ARS Diffuser ARS Available Sizes (in.
PAGE 36
Ceiling Diffusers - Steel/Aluminum Neck View Style Type SR & AR Air Patterns Listed Sizes 6x6 9x9 12x12 15x15 18x18 21x21 Ceiling Diffusers - Steel/Aluminum STYLE 4 24x24 27x27 30x30 33x33 36x36 24 x 24 Max. in Steel 9x6 to 45x6 12x9 to 45x9 15x12 to 45x12 18x15 to 45x15 21x18 to 45x18 STYLE 41 STYLE 42 STYLE 41L STYLE 41S STYLE 42S STYLE 3 24x21 to 45x21 27x24 to 45x24 30x27 to 45x27 33x30 to 45x30 36x33 to 45x33 24 x 21 Max.
PAGE 37
Ceiling Diffusers - Aluminum ASRE Diffuser ASRS Diffuser • Extruded aluminum construction • Step-down (beveled) margins overlap opening and lowers the diffuser from the ceiling • For use with roof-mounted installations • Removable core • Bright White or Satin Anodized finish • Return damper available - AR7 • Supply damper available - AS7 Engineering Data on Page 95-96 ASRE Available Sizes (in.
PAGE 38
Ceiling Diffusers - Aluminum MCD Adjustable Modular Diffuser MCD Available Sizes (in.) 6" x 6", 8" x 8", 10" x 10", 12" x 12", 14" x 14", 16" x 16", 18" x 18", 20" x 20", 22" x 22" MCDD Adjustable Modular Diffuser MCDD Available Sizes (in.) 6" x 6", 8" x 8", 10" x 10", 12" x 12", 14" x 14", 16" x 16", 18" x 18", 20" x 20", 22" x 22" MCDS Adjustable Modular Diffuser MCDS Available Sizes (in.
PAGE 39
Ceiling Diffusers - Aluminum MCDSD Adjustable Modular Diffuser MCDSD Available Sizes (in.
PAGE 40
Spiral Diffusers Model SV Single-Deflection Diffuser Spiral Diffusers (Shown with scoop) Size restrictions apply. See price list for sizes and ordering information.
PAGE 41
Spiral Diffusers Model USVH Double Deflection Universal Diffuser Size restrictions apply. See price list for sizes and ordering information. USVH Available Sizes (in.) 10" x 3" to 36" x 12" Model SS Slot Face Diffuser Size restrictions apply. See price list for sizes and ordering information. • Extruded aluminum construction • Slot sizes available: 1/2'', 3/4'', 1'' • Optional face adjustable scoop to direct airflow.
PAGE 42
Linear and Slot Diffusers LS/LF Series Diffuser Minimum width 1-1/2" Linear and Slot Diffusers Note: Floor application must be ordered as "LF." Eight-inch maximum width for constant traffic; 12" maximum width for occasional traffic; maximum length 72". See following page for dimensional data.
PAGE 43
Linear and Slot Diffusers Mounting Style 1 (Ceiling) LS Mounting Style 2 (Ceiling/Sidewall) LS Mounting Style 3 Mounting Style 0 (Floor/Sill) LF Mounting Style GO Mounting Style 00 (Bars Only) BAR STYLES 00 Bar Style Only w/o Mounted Damper or Control Grid (Ceiling/Sidewall) LS Linear and Slot Diffusers L Series - Dimensional Data (Concrete/Tile) LF Note: Quantity of bars = 2 x listed width minus 2. Example: 4" listed width = 4" x 2 = 8 minus 2 = 6 bars.
PAGE 44
Linear and Slot Diffusers L Series Single-Leaf Damper Option • Aluminum construction • Leaf type for sizes 11/2" to 3" Note: Order with desired diffuser for attachment at factory. Linear and Slot Diffusers Cannot be used with hanger brackets. L Series G Grid Option • Aluminum construction • Individual adjustable blades • Cannot be used with hanger brackets Note: G Grid blades are assembled parallel to short dimension. Order with desired diffuser for factory fitting.
PAGE 45
Linear and Slot Diffusers MARGIN STYLE SLOT S Series Slot Diffusers DIFFUSER ONLY Mounting Style 0 with Hanger Bracket BO B1 EO E1 Mounting Style 1 with No. 3 with No. 2 Standard Mounting Plaster Frame B2 B3 Wall-Mounting Plaster Frame 1" End Cap / 1/2" 3 4" Wall-to-Wall Mounting Plaster Frame B4 1" / 1/2" 3 4" FO 1" 3/4" End Cap / 1 2" LO 1" / 1/2" 3 4" Note: Narrow regress T-Bar ceiling only.
PAGE 46
Linear and Slot Diffusers Damper Single-leaf dampers are furnished in each slot opening throughout the entire diffuser length when specified. Dampers are fastened to the margin and are spring-loaded to hold their setting at all duct pressures. Multiple dampers are furnished for grille lengths over 24 inches. Linear and Slot Diffusers Dampers are part of the S Series and are not specified separately.
PAGE 47
Linear and Slot Diffusers STYLE B0 STYLE B1 Also for T-Bar applications Duct width equals overall width. * *Overall width is only 5/16" greater than the duct width. STYLE B2 Linear and Slot Diffusers Order 223/4" or 463/4" lengths with End Caps.
PAGE 48
Linear and Slot Diffusers STYLE E1 STYLE E0/F0 Also for T-Bar applications Linear and Slot Diffusers For E0, order 22" and 46" lengths with End Caps.
PAGE 49
Linear and Slot Diffusers S Series Mitered Corners S Mitered Corner Sections Order as: MC 90 Plaster frame mitered corners can be specified with the outlet mitered corner. DP Distribution Plenum • Galvannealed steel construction • For L and S Series Linears and Slots • Available in insulated or noninsulated designs E F L Linear and Slot Diffusers 90-degree mitered corners are available as factory-fabricated FINISH SA - Satin Anodized section.
PAGE 50
Louvers DL Drum Louver Louvers • All-aluminum construction • Horizontal and vertical air stream control • Galvanized opposed-blade damper (optional) • Adjustable drum and vane design • White or Mill finish Drum Louver Available Sizes 6" x 12", 6" x 18", 6" 10" x 20", 10" x 25", 10" 12" x 30", 12" 15" x 30", 15" x x x x 24", 30", 40", 50", 6" x 30", 6" x 48", 6" x 60" 10" x 35", 10" x 40", 10" x 50" 12" x 50", 12" x 70" 15" x 60", 15" x 70" Order H x W Duct Opening Sizing Listed Height Size Duct Op
PAGE 51
Louvers BV Brick/Block Vent • Extruded aluminum construction • Standard masonry size • Maximum water protection • 6063-T5 extruded aluminum alloy • 18 x 16 mesh aluminum insect screen standard • 4" standard depth • Satin Anodized finish Note: To order specify Model, Depth, Finish Example: BV168 4 SA DIMENSIONS/FREE AREA STANDARD BRICK JUMBO BRICK MODULAR BLOCK Masonry Opening Size A B Width Inches Height Inches Free Area Sq. Ft. 802 ONE BRICK 8 2 1/ 2 .01 805 TWO BRICK 8 4 3/ 4 .
PAGE 52
Louvers 1530ZC Stationary Louver • • • • • • Extruded aluminum construction Fixed Z blade louver Blades at 30-degree angle 11/2" louver depth Channel frame Available with bird screen or insect screen • Mill finish standard 1530ZC Shown 1530ZF Stationary Louver • • • • • • Louvers Extruded aluminum construction Fixed Z blade louver Blades at 30-degree angle 11/2" louver depth Flange frame Available with bird screen or insect screen • Mill finish standard 1545ZC Stationary Louver • • • • • • Extruded a
PAGE 53
Louvers 245ZC Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2" louver depth Channel frame Available with bird screen or insect screen • Mill finish standard 245ZF Shown 245ZF Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2" louver depth Flange frame Available with bird screen or insect screen • Mill finish standard Louvers 445ZC Stationary Louver • • • • • • Extruded aluminum constr
PAGE 54
T-Bar Construction Features T-Bar Construction Features Our popular supply and return A unique modular collar system innovative response to the challenge damper unit, which can be shared products for T-Bar ceilings are an of creating a better indoor environment. T-Bar products combine clean appearance with installation ease, and include critical design details to ensure consistent performance.
PAGE 55
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 659T Steel Lanced Filter Grille 659T Available Sizes 20" x 20" with extended frame (overall 233/4" x 233/4") for 24" x 24" openings 44" x 20" with extended frame (overall 473/4" x 233/4") for 48"x24" opening • Steel construction • Lanced-face design with 1/3" blade spacing • Flush, removable face with concealed latches and hinges can be installed in any direction • Uses standard 1" disposable filters (not furnished) • Bright White finish 65
PAGE 56
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 673TPI R6 Steel Filter Grille 673TPI R6 Available Size 20" x 20", overall 233/4" x 233/4" • Steel construction • Lanced-face design with 1/2" blade spacing • Flush, face with screwdriver latches and piano hinges can be installed in any direction • Plenum box with R6 insulated ductboard • Uses standard 1" disposable filters (not furnished) • Bright White finish Molded Fiberglass Back R4.
PAGE 57
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 96AFBTI 96AFBTI Available Size 20" x 20", overall 233/4" x 233/4" Steel Fixed-Bar Filter Grille with Fiberglass Back See page 54 for fiberglass specifications. • Steel construction • Bar-style face design • Flush, removable face with concealed latches and hinges, can be installed in any direction • R4.
PAGE 58
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles REF5T/REF5TI Aluminum Egg Crate Filter Grille • • • • • • • Available Sizes 20" x 20" with extended frame (overall 233/4" x 233/4" ) for 24" x 24" openings 44" x 20" with extended frame REF5T only (overall 473/4" x 233/4") for 48" x 24" openings Aluminum and steel construction Egg crate style face REF5T Hinged to filter frame Mount flush with T-Bar ceilings Filter grilles equipped with REF5TI thumb screw fasteners R4.
PAGE 59
T-Bar Return-Air Grilles 94AT Available Sizes 22" x 22" (overall 233/4" x 233/4" ) for 24" x24" openings 46" x 22" (overall 473/4" x 233/4") for 48" x 24" openings T-Bar Return-Air Grilles 94AT Steel Bar-Style Return Grille Engineering Data not available • Steel construction • Mount flush with T-Bar ceilings • Bright White finish RH45T Aluminum Bar-Style Return Grille RH45T Available Sizes 22" x 22" (overall 233/4" x 233/4" ) for 24" x24" openings 46" x 22" (overall 473/4" x 233/4") for 48" x 24" open
PAGE 60
T-Bar Return-Air Grilles T-Bar Return-Air Grilles RE5T Aluminum Egg Crate Return Grille RE5T Available Sizes 22" x 22" (overall 233/4" x 233/4" ) for 24" x24" openings 22" x 46" (overall 473/4" x 233/4") for 48" x 24" openings • All aluminum construction • Egg crate style face • Mount flush with T-Bar ceilings • Bright White or Mill Aluminum finish RE5TI Aluminum Egg Crate Return Grille with Insulated Back RE5TI Available Size grid core face 1/2" x 1/2" x 1/2" • • • • See page 54 for fiberglass speci
PAGE 61
444 SurfAire® Aluminum Face Renovator Series Diffuser T-Bar Surfaire/Renovator Diffusers T-Bar Surfaire/Renovator Diffusers 444 Available Size overall size 233/4" x 233/4" • Aluminum face • Unique deflector apertures • Air distributed in thin layers along ceiling surface allowing optimum mixing of conditioned air • Formed galvanized steel back panel • Frame includes four seismic safety connections • Back plate covered with glass fiber insulation to reduce condensation • Aluminum foil vapor barrier protec
PAGE 62
T-Bar Rezzin Diffusers T-Bar Rezzin Diffusers RZSRT Plastic T-Bar Directional Diffuser RZSRT Available Size (in.) 24 x 24 • Engineered polymer construction • Four-way deflection • Available with RZSR square-to-round, ordered separately • Bright White finish • Contains metal screws RZMCDST Plastic T-Bar Modular Core Diffuser RZMCDST Available Size (in.
PAGE 63
T-Bar Rezzin Diffusers RZ500 Plastic Square Ceiling Diffuser • • T-Bar Backer Plate or Rafter Rough-In Plate Available RZ503 • • Engineered polymer construction 12"x12" face 6", 7" and 8" collars included Ratcheting cam lock–install without screws Removable core and integral damper Available in 4-way, 3-way and 2-way corner Bright White finish Contains metal parts RZ504 T-Bar Rezzin Diffusers • • • • RZ500 Available Size (in.
PAGE 64
T-Bar Fixed-Pattern/Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers HVS/HVS R6 Steel High-Volume Supply • • • • • • • • • • • • Steel construction Provides high air volume delivery 360-degree air diffusion Formed back panel Fixed core Fiberglass insulation blanket with foil HVS Shown vapor barrier to minimize condensation on HVS Insulation prescored to accommodate collar size desired R6 molded fiberglass back on HVS R6; use 5400 with 5400PP Accepts unique 2" high snap-in collar (5400 series) (6
PAGE 65
T-Bar Fixed-Pattern Perforated Supply Diffusers DPD/DPD R6 Available Sizes 6" 8" 10" 12" 14" T-Bar Fixed-Pattern Diffusers DPD/DPD R6 Steel T-Bar Plate Diffuser • Aesthetically appealing, single-face plate design • 360° air diffusion pattern • Detachable face plate • 2" fixed collar • Optional R6 insulated back (DPD R6) • White finish RENPS/ARENPS RENPS R6 Steel/Aluminum Perforated Supply Diffuser with Insulated Back See page 54 for fiberglass specifications.
PAGE 66
T-Bar Perforated Supply/Return T-Bar Perforated Supply/Return CBPS/CBPR Steel Curved-Blade Perforated Supply/Return CBPS Curved-Blade Perforated Supply • Steel construction • Removable hinged face allows for easy access to air pattern control core • Face can be removed for cleaning • Individually adjustable pattern deflectors factory-set at 4-way deflection; can be field-adjusted for 1, 2, 3-way air patterns • Available in 6", 8", 10", 12", 14" and 16" diameter necks • Unique 2" high collar permits easy
PAGE 67
T-Bar Perforated Supply/Return FBCS Flat Back Perforated Supply FBR Flat Back Return FBCS/FBR Available Size Overall Size 233/4" x 233/4" Engineering Data not available T-Bar Perforated Supply/Return FBCS/FBR Steel Flat Back Perforated Supply/Return Diffuser • Supply diffuser with 4-way deflector • Return without deflector • 1" thick fiberglass back with foil vapor barrier • Back with preprinted template accepts 6" to 18" spin collar or unique tab collar (6400 series 6"-14"), 5400 6"-18" with 5400PP
PAGE 68
T-Bar Perforated Supply/Return T-Bar Perforated Supply/Return RFPS/RFPR Steel Removable Face Perforated Supply/Return RFPS/RFPR Available Size Overall Size 233/4" x 233/4" • Steel construction • Removable hinged face for easy access to deflectors • Face can be removed for cleaning • Patented adjustable deflectors provide various directional patterns RFPS Removable Face Perforated Supply • Formed steel black back panel U.S. Pat. No.
PAGE 69
T-Bar Perforated Supply/Return PDSD Available Size Overall Size 233/4" x 233/4" T-Bar Perforated Supply/Return PDSD Steel Perforated Diffuser Supply (with adjustable deflector) • • • • • • • • • • Perforated steel face Face adjustable deflectors Formed steel black back panel Fiberglass insulation blanket with foil vapor barrier to minimize condensation Insulation prescored to accommodate collar size desired Accepts unique snap-in collar (5400 Series) 6" to 12" – order separately Available in 14" fixed c
PAGE 70
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser ART Available Sizes ART 6" x 6", 9" x 9", 12" x 12", 15" x 15", 21" x 21" Aluminum Note: For 18" x 18" neck, order ARE 18" x 18". Square and Rectangular T-Bar Diffusers • Aluminum construction • Available in one, two, three and four-way deflections • Removable core • Bright White or Satin Anodized finish SRT Available Sizes SRT 6" x 6", 9" x 9", 12" x 12", 15" x 15" Steel Note: For 18" x 18" neck, order SRE 18" x 18".
PAGE 71
T-Bar Directional/Modular Diffuser MCDSTSR MCDST/MCDSTSR Available Sizes 6" x 6", 8" x 8", 10" x 10", 12" x 12", 14" x 14", 16" x 16", 18" x 18", 20" x 20" T-Bar Directional/Modular Diffuser MCDST Aluminum Modular Core Diffuser • Extruded aluminum diffuser in aluminum panel • Modular cores provide one, two, three, and four-way air patterns • Removable modules provide easy access to duct-mounted damper • Available in 6" to 20" • Available as MCDSTSR with squareto-round transition attached • Bright White
PAGE 72
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser A500P Steel T-Bar Panel for A500 Series Diffusers A504MS/A504OB Four-way deflection A500P T-Bar Panel Available Size Opening 6" to 14" Overall 233/4" x 233/4" • Adapts A500 diffuser to T-Bar installation • Diffuser snaps in behind panel for clean appearance • Steel panel • Diffuser must be ordered separately • Bright White finish • Diffuser sizes 6"x6" to 14"x14" OB Damper A501MS/A501OB One-way deflection A502MS/A502OB Two-way defl
PAGE 73
T-Bar Accessories 6400 Tab Collar • Galvanized steel construction • For use with fiberglassbacked ceiling diffusers • Tabbed for easy installation • Accepts 3800 Series damper • Unique snap-in design for easy installation • 2" high collar permits easy flex connections • Bead on collar improves the strength and provides retention for flexible duct connections 6400 Series Available Sizes 8" 10" 12" 14" T-Bar Accessories 5400 Series Collar Ring* 6" 5400 Series Available Sizes 6" 7" 8" 9" 10" 12" 14"* 16
PAGE 74
T-Bar Accessories T19 Series Damper • Multi-blade damper • Tabs for easy installation • For use with 5400 Series collar • Bright White finish T-Bar Accessories Note: 6" 19 Series Available Sizes 8" 10" 12" 14" 3/16 hex operator by others RD Radial Damper • Galvanized steel construction • Face-adjustable • For use with round neck diffusers • Mill finish SMF Aluminum Surface Mount Frame 6" RD Available Sizes 8" 10" 12" SR Steel Square-to-Round Transition • Galvanized steel construction • Allows fl
PAGE 75
Miscellaneous P Filler Panel • Steel or aluminum construction • Available in 9 sizes from 12" x 12" to 36" x 36" in 12" increments • Bright White finish P Filler Panel Available Sizes 12" x 12", 24" x 12", 36" x 12", 48" x 12", 24" x 24", 36" x 24", 48" x 24", 36" x 36" Diffusers are factory-installed (must order with diffuser).
PAGE 76
Miscellaneous DT Air Diverter • Extruded aluminum construction • Two sets of individually adjustable blades • Equalizes flow and controls volume at collar take-offs to registers and grilles • Equipped with gasket around outside of frame for positioning firmly in duct • Mill finish Miscellaneous FT Flexiturn • Extruded aluminum construction • Designed to pick up air from the main trunk at branch take-offs and divert it toward the grille • Mounts easily with sheet metal screws • Gang-operated blades move
PAGE 77
Engineering Data because the pressure and noise can be accommodated. Using the Engineering Data For most of the models & sizes we’ve done the calculations for you. 421 300 400 500 600 700 800 .006 .010 .016 .022 .031 .040 50 4.5 70 5.0 85 6.5 100 7.5 120 9.0 135 10.0 4.0 6.0 8.0 10.0 11.0 12.5 Terminal velocity of 50 fpm 821-defl A Face Velocity Pressure Loss 24 x 8 CFM Ak Throw 1.045 400 .010 420 500 .016 525 600 .022 625 700 .031 730 800 .040 835 17.0 21.0 25.0 29.0 33.
PAGE 78
Engineering Data Engineering Data Keeping face velocity low • Returns should be at 400-600 fpm maximum • Filter Returns should be at 450 fpm maximum *ACCA recommends 300 max for filter grilles and 500 max for non-filter grilles. • The rule of thumb is 2 cfm per square inch of filter size. See table below. • Low velocity reduces noise, especially on stamped face grilles (672/673); fixed-bar grilles can handle more velocity without noise (94A/96AFB/RH45/RHF45/RCB).
PAGE 79
Engineering Data 821, 831, 92 Series and 98VOH (Page 6-8, 11) Deflection A Deflection C 400 500 600 .010 .016 .022 65 80 100 6.5 8.0 10.0 80 100 120 7.0 9.0 11.0 100 120 145 8.0 10.0 12.0 115 145 170 8.5 11.0 13.0 125 155 190 9.0 11.0 14.0 125 155 190 9.0 11.0 14.0 145 185 220 10.0 12.0 15.0 150 190 225 10.0 12.0 15.0 170 210 250 11.0 13.0 16.0 180 220 265 11.0 13.0 16.0 205 255 305 12.0 15.0 17.0 210 265 315 12.0 15.0 18.0 255 315 380 13.0 16.0 19.0 255 320 385 13.0 16.0 19.0 310 385 465 14.0 18.0 21.
PAGE 80
Engineering Data 821, 831, 92 Series and 98VOH (Page 6-8, 11) Deflection G 400 .010 50 3.5 65 4.0 75 4.5 90 5.0 95 5.0 100 5.0 115 5.5 120 5.5 130 6.0 140 6.0 16 6.5 165 6.5 195 7.0 200 7.5 240 8.0 270 8.5 300 9.0 325 9.5 405 11.0 410 10.0 490 11.0 495 11.0 515 12.0 615 13.0 620 13.0 745 14.0 500 600 700 800 900 .016 .022 .031 .040 .050 60 75 85 100 110 4.5 5.5 6.0 7.5 8.0 80 95 110 125 140 5.0 6.0 7.0 8.0 9.0 95 115 135 150 170 5.5 7.0 8.0 9.0 10.0 110 135 155 180 200 6.0 7.5 8.5 10.0 11.
PAGE 81
Engineering Data 94/94A Series Return Air Grilles & Registers (Page 10) 96AFB Steel Fixed-Bar Filter Grille (Page 10) 300 45 .010 84 .010 135 .011 96 .011 112 .011 152 .011 198 .011 267 .011 301 .011 336 .011 406 .011 458 .011 511 .011 571 .011 618 .011 690 .011 781 .011 835 .011 946 .011 1057 .011 1284 .011 1341 .011 1633 .010 1751 .009 1992 .008 2742 .008 3808 .008 400 60 .019 112 .019 180 .019 127 .019 150 .019 203 .019 264 .019 355 .020 401 .020 448 .020 541 .020 611 .020 682 .020 761 .020 824 .
PAGE 82
Engineering Data H and V Series (Page 12-16) Deflection C 400 500 600 700 .010 .016 .022 .031 60 80 95 110 6.5 8.0 10.0 12.0 80 100 120 140 7.5 9.5 12.0 13.0 95 120 145 170 8.0 10.0 12.0 14.0 115 140 170 195 9.0 11.0 13.0 15.0 125 155 185 215 9.0 12.0 14.0 16.0 125 155 190 220 9.0 12.0 14.0 16.0 145 180 220 255 10.0 12.0 15.0 18.0 150 190 225 265 10.0 13.0 15.0 18.0 165 210 250 295 11.0 13.0 16.0 19.0 180 225 270 310 11.0 14.0 17.0 19.0 205 255 305 360 11.0 14.0 17.0 20.0 210 265 315 370 12.0 15.0 18.0 21.
PAGE 83
Engineering Data H and V Series (Page 12-16) Deflection E Deflection G 400 500 600 700 800 .010 .016 .022 .031 .040 45 60 70 85 95 2.5 3.5 4.0 5.0 5.5 60 75 90 105 120 3.0 3.5 4.5 5.0 6.0 80 100 120 140 160 4.5 6.0 7.5 8.5 10.0 90 115 140 160 185 5.0 6.5 8.0 9.0 11.0 100 125 150 180 205 5.5 6.5 8.0 9.5 12.0 105 130 155 180 205 5.5 7.5 8.5 9.5 11.0 120 150 180 210 240 6.0 7.5 9.0 10.0 12.0 125 155 185 220 250 6.0 7.5 9.0 11.0 12.0 135 170 205 240 275 6.5 8.0 9.5 11.0 13.0 145 185 220 255 290 6.5 8.5 10.
PAGE 84
Engineering Data Engineering Data C Series Curved-Blade Diffusers Selection Procedure C Series Curved-Blade Diffusers (Page 17-21) One-Way, Two-Way 1. Determine the diffuser air pattern best suited to the duct layout and room area to be served. Face Velocity Pressure Loss CFM 6x6 Ak .090 Throw 1/2 CFM 8x6 Ak .100 Throw 1/2 CFM 10 x 6 Ak .150 Throw 1/2 CFM 8x8 Ak .160 Throw 1/2 CFM 12 x 6 Ak .180 Throw 1/2 CFM 14 x 6 Ak .210 Throw 1/2 10 x 10 CFM Ak .240 Throw 1/2 12 x 10 CFM Ak .
PAGE 85
Engineering Data L L C Series Three-Way 400 500 600 700 800 .010 .016 .022 .031 .040 35 45 55 65 70 9/13 11/17 15/20 17/24 18/26 2.0/2.0 2.5/3.0 3.0/3.5 3.5/4.0 4.0/4.5 40 50 60 70 80 18/11 24/13 28/16 32/19 36/22 2.5/2.0 3.0/2.5 3.5/3.0 4.5/3.5 5.0/4.0 60 75 90 105 120 22/19 27/24 32/29 39/33 44/38 3.0/2.5 3.5/3.0 4.5/4.0 5.0/4.5 6.0.5.0 65 80 95 110 130 31/17 36/22 43/26 50/30 60/35 3.5/2.5 4.0/3.5 5.0/4.0 5.5/4.5 7.0/5.0 70 90 110 125 145 20/25 26/32 32/39 37/44 43/51 2.5/3.0 3.5/4.0 4.5/5.0 5.0.5.5 5.
PAGE 86
Engineering Data Engineering Data RH45, RHD45, RHF45 Registers and Grilles (Page 24, 25) RCB Series Return Air Registers and Grilles (Page 22) Face Velocity 6x6 CFM Ak .110 Ps 8x8 CFM Ak .240 Ps 12 x 6 CFM Ak .280 Ps 14 x 6 CFM Ak .330 Ps 14 x 8 CFM Ak .460 Ps 12 x 12 CFM Ak .610 Ps 24 x 8 CFM Ak .840 Ps 18 x 12 CFM Ak .950 Ps 30 x 8 CFM Ak 1.070 Ps 24 x 12 CFM Ak 1.290 Ps 18 x 18 CFM Ak 1.460 Ps 30 x 12 CFM Ak 1.630 Ps 20 x 20 CFM Ak 1.820 Ps 36 x 12 CFM Ak 1.980 Ps 24 x 20 CFM Ak 2.
PAGE 87
Engineering Data RE5 Series Return Air Registers and Grilles (Page 23) RH90 Registers and Grilles (Page 26) 400 50 .012 103 .011 119 .011 141 .011 195 .011 256 .011 348 .010 395 .010 441 .010 535 .010 605 .010 676 .010 755 .010 818 .010 914 .010 1034 .010 1106 .009 1252 .009 1399 .009 1697 .009 1773 .009 2154 .009 2308 .009 2621 .009 3588 .009 4946 .008 500 63 .019 129 .018 148 .018 177 .018 244 .018 320 .017 435 .017 493 .016 552 .016 668 .016 756 .016 845 .016 943 .016 1023 .015 1142 .015 1292 .
PAGE 88
Engineering Data Face Velocity Engineering Data TG, TGF Transfer Grilles (Page 27) Face Velocity* CFM 8x8 Ak .440 Ps CFM 14 x 6 Ak .550 Ps CFM 12 x 8 Ak .640 Ps CFM 14 x 8 Ak .740 Ps CFM 20 x 6 Ak .780 Ps CFM 12 x 12 Ak .930 Ps CFM 30 x 6 Ak 1.120 Ps CFM 16 x 12 Ak 1.190 Ps CFM 18 x 12 Ak 1.330 Ps CFM 20 x 12 Ak 1.460 Ps CFM 16 x 16 Ak 1.540 Ps CFM 24 x 12 Ak 1.750 Ps CFM 18 x 18 Ak 1.950 Ps CFM 30 x 12 Ak 2.170 Ps CFM 20 x 20 Ak 2.420 Ps CFM 24 x 18 Ak 2.550 Ps CFM 30 x 18 Ak 3.230 Ps CFM 24 x 24 Ak 3.
PAGE 89
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Four-Way Square 500 .020 50 2-3/2-3 110 2-4/2-4 200 3-5/3-5 310 4-6/4-6 450 4-8/4-8 615 5-9/5-9 800 5-11/5-11 1010 6-12/6-12 1370 7-13/7-13 600 700 800 900 1000 1200 1400 .020 .030 .040 .050 .060 .090 .
PAGE 90
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Engineering Data Three-Way Style 3 Face Velocity Pressure Loss CFM 6x6 Ak .100 Throw X/Y CFM 9x9 Ak .220 Throw X/Y CFM 12 x 12 Ak .400 Throw X/Y CFM 15 x 15 Ak .620 Throw X/Y CFM 18 x 18 Ak .900 Throw X/Y CFM 21 x 21 Ak 1.230 Throw X/Y CFM 24 x 24 Ak 1.600 Throw X/Y CFM 27 x 27 Ak 2.020 Throw X/Y 500 .020 50 2-4/1-2 110 2-4/2-3 200 4-7/2-5 310 4-8/2-4 450 4-9/3-5 615 5-11/3-6 800 7-14/5-9 1010 7-13/4-9 600 .
PAGE 91
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Two-Way Corner Style 2C 900 .050 80 3-7/3-7 175 6-10/6-10 315 8-13/8-13 495 10-16/10-16 700 12-19/12-19 975 15-23/15-23 1270 17-27/17-27 1585 19-29/19-29 1000 .060 90 5-8/5-8 195 6-11/6-11 350 9-14/9-14 550 11-18/11-18 780 14-22/14-22 1080 17-28/17-28 1410 19-29/19-29 1760 21-33/21-33 1200 .
PAGE 92
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Engineering Data Two-Way Style 2L Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw Y CFM 12 x 6 Ak .170 Throw Y CFM 15 x 6 Ak .220 Throw Y CFM 12 x 9 Ak .260 Throw Y CFM 15 x 9 Ak .320 Throw Y CFM 18 x 9 Ak .390 Throw Y CFM 21 x 9 Ak .450 Throw Y CFM 15 x 12 Ak .430 Throw Y CFM 18 x 12 Ak .520 Throw Y CFM 21 x 15 Ak .760 Throw Y CFM 24 x 15 Ak .870 Throw Y CFM 21 x 18 Ak .910 Throw Y CFM 27 x 21 Ak 1.
PAGE 93
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Two-Way Style 2 500 .020 45 3-5 95 5-7 175 4-7 275 8-12 390 9-15 540 11-17 705 12-19 880 12-20 600 .020 55 3-5 115 6-8 210 6-9 330 10-14 470 11-17 650 14-20 845 14-22 1055 15-23 700 .030 60 4-7 135 6-8 245 9-13 385 10-15 545 12-18 760 15-23 990 17-25 1230 18-26 800 .040 70 4-7 155 6-9 280 10-15 440 12-18 625 14-20 865 18-26 1130 20-30 1410 21-31 900 .
PAGE 94
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Engineering Data One-Way Style 1L Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw CFM 12 x 6 Ak .170 Throw CFM 15 x 6 Ak .220 Throw CFM 12 x 9 Ak .260 Throw CFM 15 x 9 Ak .320 Throw CFM 18 x 9 Ak .390 Throw CFM 15 x 12 Ak .430 Throw CFM 18 x 12 Ak .520 Throw CFM 21 x 15 Ak .760 Throw CFM 24 x 15 Ak .870 Throw CFM 21 x 18 Ak .910 Throw CFM 27 x 21 Ak 1.380 Throw 500 .
PAGE 95
Engineering Data ASR Square Supply Return Diffuser — Aluminum (Page 35) Four-Way Square Face Velocity Pressure Loss 600 .020 700 .030 90 .01 2-4/2-4 <30 105 .02 2-4/2-4 <30 120 .02 3-5/3-5 <30 CFM 9x9 Grid Core -Ps Ak .340 NC 65 <.01 <30 80 <.01 <30 90 <.01 <30 Face Velocity Pressure Loss 500 .020 600 .020 700 .030 200 .01 3-5/3-5 <30 240 .02 4-6/4-6 <30 280 .02 4-8/4-8 <30 CFM 9x9 Grid Core -Ps Ak .340 NC 150 .01 <30 180 .02 <30 210 .02 <30 Face Velocity Pressure Loss 500 .020 600 .
PAGE 96
Engineering Data ASR Square Supply Return Diffuser — Aluminum (Page 35) Four-Way Square Engineering Data Face Velocity Pressure Loss 500 .020 600 .020 700 .030 560 .01 3-5/3-5 <30 675 .02 3-5/3-5 <30 785 .02 4-8/4-8 <30 CFM 18 x 18 Grid Core -Ps Ak 1.600 NC 345 <.01 <30 505 <.01 <30 590 <.01 <30 Face Velocity Pressure Loss 500 .020 600 .020 700 .030 635 .01 3-7/3-7 <30 765 .02 4-8/4-8 <30 890 .02 4-10/4-10 <30 CFM 21 x 21 Grid Core -Ps Ak 2.100 NC 475 <.01 <30 575 <.01 <30 665 <.
PAGE 97
Engineering Data MCD Modular Ceiling Diffuser — Aluminum (Page 36, 37) Two Way 500 .020 45 2-5/2-5 <20 80 3-6/3-6 <20 130 3-8/3-8 <20 190 5-9/5-9 <20 260 5-11/5-11 <20 350 6-12/6-12 <20 450 6-14/6-14 <20 555 8-15/8-15 <20 665 8-17/8-17 <20 600 700 800 .020 .030 .
PAGE 98
Engineering Data MCD Modular Ceiling Diffuser — Aluminum (Page 36, 37) Engineering Data Four-Way Face Velocity Pressure Loss CFM 6x6 Throw X/Y Ak .090 NC CFM 8x8 Throw X/Y Ak .150 NC CFM 10 x 10 Throw X/Y Ak .250 NC CFM 12 x 12 Throw X/Y Ak .370 NC CFM 14 x 14 Throw X/Y Ak .520 NC CFM 16 x 16 Throw X/Y Ak .700 NC CFM 18 x 18 Throw X/Y Ak .900 NC CFM 20 x 20 Throw X/Y Ak 1.100 NC CFM 22 x 22 Throw X/Y Ak 1.330 NC 500 .
PAGE 99
Engineering Data SS Spiral Diffuser (Page 39) See notes on next page and see page 39 for min. duct diameter. 1/2" wide !" wide slot slot–nonducted - nonducted 7 10 13 17 20 1-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .002 7-4-2 <15 .003 11-6-4 <15 .006 15-7-5 <15 .009 19-9-6 <15 .016 22-11-7 <15 10 17 23 30 37 43 2-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .001 6-3-2 <15 .002 9-5-3 <15 .
PAGE 100
Engineering Data SS Spiral Diffuser (Page 39) Notes: Engineering Data 1. Tests conducted in accordance with ANSI/ASHRAE 70-1991 at isothermal conditions. 2. Engineering Units: Airflow Rate = CFM/linear foot Static Pressure = in. w.c. Throw = ft. at 50, 100, and 150 FPM terminal velocity 3. Noice Criteria is based on 10 dB room absorption (Re: 1012 watts) evaluated at 125 through 4000 Hz octave bands. 4. Throw data are based on a a horizontal discharge in one direction only.
PAGE 101
Engineering Data SV and SVH Spiral Diffusers USV, USVH Universal Spiral Diffusers (Page 38) See page 39 for min. duct diameter. 600 .066 84 10-6 108 11-8 126 12-8 150 13-9 234 17-11 312 19-13 20 378 21-14 20 396 22-15 21 426 23-15 21 528 25-17 22 588 26-18 23 666 28-19 23 810 31-21 24 894 32-22 24 1092 36-25 25 1374 41-28 26 1650 44-30 27 700 .
PAGE 102
Engineering Data L Series (Page 40-42) Engineering Data NOTES: 1. Table 1 based on up to 4-foot grille length. For longer lengths, correct throw and NC per Table 2. 2. When using continuous grille lengths with alternate active and inactive sections, a reduction in throw can be obtained by omitting the factors contained in Table 2. 3.
PAGE 103
Engineering Data L Series (Page 40-42) Table 2 - Continuous Grille Length Factors Table 5 - Supply Grille Areas (per foot of length) Modify Table 1 by listed values for grille lengths above 4 feet. 4-6 7-20 21-100 Throw (T) Sidewall Sill/Floor Min.-Max. Min.-Max. No Change T x 1.10 T x 1.15 NC +0 +5 +10 An 2 .17 2 .21 3 .25 4 .33 5 .42 Listed Width in Inches 6 8 10 12 14 16 18 20 24 30 36 .50 .67 .84 1.00 1.20 1.30 1.50 1.70 2.00 2.50 3.00 Ak .04 .06 .09 .11 .16 .
PAGE 104
Engineering Data S Series (Page 43-47) T T T VT VT T VK VK VK VT VT VK Engineering Data 6' 2-1/2' VR 6' VR SIDEWALL SILL VR CEILING ONE WAY CEILING TWO WAY Table 1 - Supply Air Type 50 ( " Slot) Throw (T) in Feet CFM/Ft of total Slot length 10 20 30 40 50 60 70 80 90 100 120 140 160 180 200 102 6' 6' VR Number of Slots 1 2 1 2 3 1 2 3 4 2 3 4 5 3 4 5 6 3 4 5 6 7 3 4 5 6 7 4 5 6 7 8 4 5 6 7 8 9 5 6 7 8 9 10 6 7 8 9 10 7 8 9 10 8 9 10 8 9 10 9 10 Min. P s in H 2 O .
PAGE 105
Engineering Data S Series (Page 43-47) Table 1 - Supply Air Type 75 (" " Slot) Throw (T) in Feet CFM per Foot 20 30 40 50 60 70 80 90 100 120 140 160 180 200 250 1 1 2 1 2 3 1 2 3 4 2 3 4 5 2 3 4 5 2 3 4 5 6 3 4 5 6 7 3 4 5 6 7 3 4 5 6 7 4 5 6 7 8 5 6 7 8 9 6 7 8 9 10 6 7 8 9 10 6 7 8 9 10 8 9 10 Min. P s in H 2 O .01 .04 <.01 .09 .02 <.01 .16 .04 .02 .01 .06 .03 .02 <.01 .09 .04 .02 .01 .13 .06 .03 .02 .01 .07 .04 .03 .02 <.01 .09 .05 .03 .02 .01 .13 .06 .04 .03 .02 .09 .06 .04 .03 .02 .
PAGE 106
Engineering Data S Series (Page 43-47) Table 1 - Supply Air Type 10 (1" Slot) Throw (T) in Feet Engineering Data CFM per Foot 20 30 40 50 60 70 80 90 100 120 140 160 180 200 250 300 350 104 Number of Slots 1 1 2 1 2 1 2 3 2 3 4 2 3 4 2 3 4 5 3 4 5 6 3 4 5 6 3 4 5 6 7 4 5 6 7 8 4 5 6 7 8 9 5 6 7 8 9 10 5 6 7 8 9 10 6 7 8 9 10 7 8 9 10 8 9 10 Min. P s in H 2 O .02 .03 .02 .06 .03 .09 .04 .02 .06 .03 .02 .09 .04 .02 .11 .05 .03 .02 .06 .04 .02 .02 .08 .04 .03 .02 .11 .06 .04 .03 .02 .09 .05 .
PAGE 107
Engineering Data S Series (Page 43-47) Type 50 Supply Diffuser Areas per Foot of Length Ak Area An Area 1 .02 .08 2 .03 .17 3 .05 .25 4 .07 .33 No. of Slots 5 6 .09 .10 .42 .50 7 .12 .58 8 .14 .67 9 .15 .75 10 .17 .84 8 .19 .96 9 .21 1.10 10 .23 1.20 8 .24 1.33 9 .27 1.50 10 .30 1.67 Type 75 Supply Diffuser Areas per Foot of Length Ak Area An Area 1 .03 .12 2 .05 .24 3 .07 .36 4 .09 .48 No. of Slots 5 6 .12 .14 .60 .72 7 .16 .
PAGE 108
Engineering Data DL Drum Louver (Page 48) 6-Inch Neck Area Outlet* Velocity Static Pressure Total Pressure (Ft2) CFM 6x9 .16 .375 Throw CFM 6 x 12 .21 .500 Throw CFM 6 x 18 .32 .750 Throw CFM 6 x 24 .41 1.000 Throw CFM 6 x 30 .52 1.250 Throw CFM 6 x 36 .62 1.500 Throw CFM 6 x 48 .83 2.000 Throw CFM 6 x 60 1.05 2.500 Throw Data based on 8dB room atenuation 800 .007 .039 128 6-7-13 168 8-10-18 256 10-14-23 328 12-17-28 416 15-20-33 496 17-23-37 664 20-26-41 840 22-29-45 1000 .010 .
PAGE 109
Engineering Data DL Drum Louver (Page 48-51) 12-Inch Outlet* Velocity Static Pressure (Ft2) Total Pressure CFM 12 x 20 .70 1.670 Throw CFM 12 x 30 1.05 2.500 Throw CFM 12 x 40 1.40 3.330 Throw CFM 12 x 50 1.75 4.160 Throw CFM 12 x 60 2.15 5.000 Throw CFM 12 x 70 2.50 5.830 Throw Data based on 8dB room atenuation 800 .007 .039 560 10-20-35 840 17-25-42 1120 20-28-49 1400 22-29-56 1720 25-33-61 2000 28-37-68 1000 .010 .
PAGE 110
Engineering Data Stationary Louvers 245ZC, 245ZF (Page 51) 1530ZC, 1530ZF (Page 50) 18 0.58 0.96 1.33 1.70 2.07 2.45 2.82 3.19 3.56 3.93 4.31 4.68 5.05 5.42 24 0.80 1.31 1.82 2.33 2.84 3.35 3.86 4.37 4.88 5.39 5.90 6.41 6.92 7.43 30 36 42 0.98 1.19 1.41 1.60 1.96 2.31 2.23 2.72 3.21 2.85 3.48 4.11 3.48 4.24 5.01 4.10 5.00 5.91 4.72 5.77 6.81 5.35 6.53 7.70 5.97 7.29 8.60 6.60 8.05 9.50 7.22 8.81 10.40 7.85 9.58 11.30 8.47 10.34 12.20 9.10 11.10 13.10 48 1.62 2.66 3.70 4.73 5.77 6.81 7.85 8.88 9.92 10.
PAGE 111
Engineering Data RZSRT Diffuser (Page 61) 6" 10" 12" 14" 500 98 .005 .024 175 .014 .030 273 .014 .029 393 .022 .038 535 .023 .037 - 600 118 .006 .034 209 .021 .043 327 .021 .042 471 .032 .054 641 .033 .053 - Neck Velocity FPM 700 800 900 1000 1200 1400 1600 137 157 177 196 236 275 314 .008 .011 .013 .016 .023 .031 .041 .046 .060 .076 .094 .134 .183 .238 15 22 26 31 244 279 314 349 419 489 559 .028 .037 .046 .057 .082 .111 .145 .058 .076 .096 .118 .170 .231 .
PAGE 112
Engineering Data RZMCDST Diffuser (Page 61) Engineering Data Throw Data - Terminal Velocity of 75 FPM 400 79 3.5 4.5 0.9 1.2 0.6 500 98 4.4 5.6 1.1 1.5 0.8 600 118 5.3 6.8 1.3 1.8 0.9 700 137 6.2 7.9 1.5 2.1 1.1 800 157 7.1 9.0 1.7 2.5 1.2 900 1000 1200 1400 1600 177 196 236 275 314 7.9 8.8 10.6 12.4 14.1 10.2 11.3 13.6 15.8 18.1 2.0 2.2 2.6 3.0 3.5 2.8 3.1 3.7 4.3 4.9 1.4 1.5 1.8 2.1 2.5 Neck Velocity CFM 1-direction 2-direction 6" 3-direction Short 3-direction Long 4-direction 400 79 1.5 1.7 0.
PAGE 113
Engineering Data RZ500 Square Ceiling Diffuser (Page 62) RZ505 (two-way corner) 300 60 0.002 2.5 2.5 1.5 82 0.009 4.0 3.5 2.5 105 0.016 5.0 4.5 3.0 400 80 0.004 3.5 3.0 2.0 109 0.016 5.0 4.5 3.0 140 0.029 6.5 6.0 4.0 500 100 0.006 4.0 4.0 2.5 136 0.025 6.0 5.5 4.0 175 0.045 8.0 7.5 5.0 600 120 0.008 5.0 4.5 3.0 164 0.037 7.5 7.0 4.5 209 0.065 9.5 9.0 6.0 700 135 0.011 6.0 5.5 3.5 191 0.050 8.5 8.0 5.5 244 0.088 11.0 10.5 7.0 300 60 0.002 2.0 2.5 2.0 2.5 1.5 1.5 80 0.009 2.5 4.0 2.5 3.5 1.8 2.5 105 0.
PAGE 114
Engineering Data Engineering Data 659T/659TI/PFT/PFTI Series Performance (Page 53, 56) Average Face Velocity 659T CFM Ak 2.440 -Ps PFT CFM Ak 2.740 -Ps 659-TI w/12" collar CFM Ak 2.230 -Ps w/14" collar CFM Ak 2.260 -Ps w/16" collar CFM Ak 2.320 -Ps PFTI w/12" collar CFM Ak 2.320 -Ps w/14" collar CFM Ak 2.590 -Ps w/16" collar CFM Ak 2.630 -Ps 300 400 500 600 730 975 1220 1465 .017 .030 .047 .067 820 1095 1370 1645 .028 .050 .078 .113 670 .084 680 .060 695 .039 890 1115 1340 .147 .230 .330 905 1130 1355 .
PAGE 115
Engineering Data DPD, DPD R6 (Page 62, 66) 400 80 .006 <20 1.0 140 .010 <20 2.5 220 .014 <20 4.0 315 .015 <20 5.5 430 .023 <20 7.0 500 100 .010 <20 2.0 175 .015 <20 3.5 275 .021 <20 5.5 395 .023 <20 7.0 535 .036 <20 8.5 600 120 .014 <20 2.0 210 .022 <20 4.0 325 .030 <20 6.5 470 .033 20 8.5 640 .051 25 10.5 700 135 .018 <20 2.5 245 .029 20 4.5 380 .041 20 8.0 550 .045 25 10.0 750 .071 30 12.0 800 155 .023 <20 3.0 280 .038 25 5.0 435 .054 25 9.0 630 .060 30 11.5 855 .093 35 13.5 900 175 .030 20 3.5 315 .
PAGE 116
Engineering Data Probe Position: The probe is held 1 inch in from the outer edge of the diffuser, flush with the face. Engineering Data PROBE POSITION 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 Four-Way (Short Throw) • For throw in all four directions, use short throw data. Three-Way (Short Throw) • For throw in all three directions, use short throw data. Three-Way (Long & Short) • For throw in the #2 & #4 direction use long throw data. • For throw in the #1 & #3 directions, use short throw data.
PAGE 117
Engineering Data CBPS Supply (Page 64) One-Way Supply 300 60 .060 2.5-4.0-5.0 <20 105 .080 4.0-6.0-7.0 <20 165 .080 4.5-7.0-8.5 <20 235 .080 5.5-8.5-10.0 <20 325 .110 4.5-7.0-8.5 <20 420 .020 5.0-8.0-10.0 <20 400 80 .080 3.5-5.0-6.0 <20 140 .110 5.5-8.0-9.5 <20 220 .110 6.5-9.5-11.5 <20 315 .110 7.5-11.0-13.5 20 430 .140 6.5-9.5-11.5 20 560 .040 7.0-10.0-12.0 <20 500 100 .100 4.0-6.0-7.0 <20 175 .160 6.5-10.0-12.0 21 275 .170 8.0-12.0-14.5 23 395 .170 9.5-14.0-17.0 25 535 .210 8.0-12.0-14.5 25 700 .
PAGE 118
Engineering Data CBPS Supply (Page 64) Engineering Data Four-Way Supply 300 Neck Size CFM Ps 6" Throw NC CFM Ps 8" Throw NC CFM Ps 10" Throw NC CFM Ps 12" Throw NC CFM Ps 14" Throw NC CFM Ps 16' Throw NC 400 60 <.010 1.5-2.0-2.5 <20 105 <.010 1.5-2.5-3.0 <20 165 0.01 3.0-4.0-5.0 <20 235 .010 2.5-3.5-4.0 <20 325 .010 2.0-3.0-3.5 <20 420 .020 3.0-4.0-5.0 <20 500 80 .010 1.5-2.5-3.0 <20 140 .010 2.0-3.0-4.0 <20 220 .020 3.5-5.5-6.5 <20 315 .020 3.0-4.5-5.5 <20 430 .020 2.5-4.0-5.0 <20 560 .040 4.0-6.
PAGE 119
Engineering Data Screw Hole Location Chart 92 Series, 94 Series, 98 Series (Pages 37-41) 821, 831 (Page 36) Engineering Data 117
PAGE 120
Engineering Data Engineering Data Screw Hole Chart for Extruded Aluminum Line V Series, H Series, C Series, RH Series 118
PAGE 121
Engineering Data 821, 831, 92 Series, 98VOH, H and V Series Drop Chart, Use with size selection charts The drop of the air stream is determined by using the throw and velocity of the register selected. On the drop chart, lay a straight edge connecting these values. The total drop of the air stream will be the sum of the drop due to temperature (Dt) and the drop due to spread (Ds). Example: The drop for a 92 Series register “C” deflection 16x5 size has an 800 fpm velocity and a 16 foot throw.
PAGE 122
Engineering Data 92 Series, H and V Series Alternate Sizing Graph Grille Width in Inches Engineering Data Method of Determining Alternate Grille Sizes Turning Line Extensive tests indicate that by varying dimensions of a grille there is no appreciable effect on the air throw, provided the same area is maintained. To change the dimensions of a grille, place a straight edge across the width and height scales on dimensions as selected from charts.
PAGE 123
Suggested Specifications Surfaire® T-Bar Diffusers Back panel shall be formed galvanized steel covered with glass fiber insulation and an aluminum foil vapor barrier. Insulation is held securely in place by face margin edge fold over. Insulation will be prescored to accept specified collar sizes. 5400 Series collars will be supplied providing efficient, tight attachment with bayonet fasteners to mating prepunched holes in back panel. Collars will provide flex duct locking tabs and damper mounting slots.
PAGE 124
Glossary of Terms Glossary of Terms Ceiling or Wall Effect The tendency of an air stream moving along a wall or ceiling surface to remain in contact with that surface. Core Area The total plane area of that portion of a grille, face, or register bounded by a line tangent to the outer opening through which air can pass. The core area is less than the register size. Example, a 14-in. x 8-in. register may have a core that is 1 in. less than the listed size; so, the core area is 13in. x 7in. – 91 sq. in.
PAGE 125
Alpha-Numeric Index Steel—Panel Extruded Aluminum Face . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 Damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Aluminum Plaster Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Control Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 OB Damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 126
Alpha-Numeric Index Alpha-Numeric Index MCDSDT 124 Extruded Aluminum—Curved-Blade Face with Damper . . . . . . . . . . . . . . .69 . . . . . . . . .95-96 Product Engineering Information Data Molded Fiberglass Back Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 P Panel Filler Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 PD Perforated Face Only . . . . . . . . . . . . . . . . . . . . .
PAGE 127
Alpha-Numeric Index SRS Directional, Step Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 . . . . . . . . .87-92 Product Engineering Information Data Recommended Noise Criteria and Face Velocity Ranges are on page 75 . . . . . . . . .97-98 . . . . . . . . . . . .99 . . . . . . . . . . . .99 . . . . . . . . . . . .86 . . . . . . . . . . . .99 . . . . . . . . . . . .99 . . . . . . . . .80-81 . . . . . . . . .80-81 . . . . . . . . .80-81 . . . . . . . . .80-81 . . .