Brochure

T-Bar Return-Air Filter Grilles
88
T-Bar Return-Air Filter Grilles
Engineering Data on Page 156
96AFBT
Steel
Fixed-Bar Filter
Grille
•
All-steel construction
•
Bar-style face design
•
Flush, removable face with
concealed latches and
hinges, can be installed in
any direction
•
Uses standard 1" disposable
filters (not furnished)
•
Bright White finish
96AFBT Available Sizes
20" x 20", overall 23¾" x 23¾"
44" x 20", overall 47¾" x 23¾"
Molded Fiberglass Back
Features
Fiberglass back meets or exceeds
the following tests and ratings.
•
Bonded foil vapor barrier
minimizes condensation
•
Deep plenum cavity improves
performance
•
6" to 14" diameter prescored
back allows neck to be
determined at time of installation
•
Back labeled with necessary
code approvals
•
Meets 25/50 tested in
accordance with A.S.T.M. E84
(UL 723)
•
UL 181 Erosion and Impact Test
•
“R” Values of 4.2 and 6.0
•
Approved for city of Los Angeles
Test and rating reports available
upon written request.
Note: Attachment of molded fiberglass
back and 5400 collar requires
5400PP (push pins).
673TPI R6
Steel
Filter Grille
•
Steel construction
•
Lanced-face design with ½" blade
spacing
•
Flush, removable face with
concealed latches and hinges can
be installed in any direction
•
Can be installed in any direction
•
Plenum box with R6 insulated
ductboard
•
Uses standard 1" disposable filters
(not furnished)
•
Bright White finish
673TPI R6 Available Size
20" x 20", overall 23¾" x 23¾"