Residential Registers, Grilles & Diffusers No one satisfies the demands for For example: an electro-deposition air distribution solutions better than paint finish creates a flawless Hart & Cooley. Our wide selection appearance; stamped face margins of registers, grilles, diffusers, and eliminate mitered corners and accessories includes a variety of rough edges; each product is shapes and sizes to meet any identified with a unique bar code application and budget requirement.
Floor Registers & Grilles Floor Registers & Grilles 210 Floor Register • • • • • • 210 Standard Sizes (in.) WIDTH HT All-steel construction 6 8 10 12 14 16 Provides firm, smooth surface 4 X X X X 6 X X X X X X Extremely rigid 8 X X X X Free area averages over 75% 9 X Toe-operated valve control 10 X X X 12 X X Golden Sand enamel finish Contact factory for sizes not listed.
Floor Registers & Grilles • • • • All-steel construction Heavy-gauge stamped face Multi-angle fins Golden Sand or Bright White enamel finish 421 Floor Diffuser • • • • • • • All-steel construction Multi-angle fin setting Rolled fin for strength and safety Welded construction Foot-operated dial control Heavy-gauge stamped face Golden Sand or Bright White enamel finish 531 Royalaire® Floor Diffuser • • • • • • Engineering Data on Page 109 Extruded aluminum construction Corrosion-resistant, high strengt
Baseboard Registers & Grilles Baseboard Registers & Grilles 405/406 Baseboard Diffuser • All-steel construction • Blankets wall or window area • Golden Sand or Bright White enamel finish Model Free Area Overall Base Number Size Sq. In.
464 Baseboard Diffuser • • • • All-steel construction Four-foot length Airfoil valves reduce resistance Equal air distribution over the length of the diffuser • Dual valves • Face can be easily removed • Golden Sand or Bright White enamel finish 474 Matching Return Air Grille • All-steel construction • Four-foot length • Complementary return air grille for Model 464 supply • Golden Sand or Bright White enamel finish Model Free Area Overall Base Number Size Sq. In.
Baseboard Registers & Grilles Baseboard Registers & Grilles 655 Baseboard Register with Damper • • • • 655 Available Sizes (in.
664 Baseboard Register • • • • • • • • All-steel construction 1/3"-spaced fins set at 20 degrees 7/8" margin turnback 1-5/8" depth when fully opened Exceptional free area Ideal for shallow duct installations Multi-shutter valve Bright White enamel finish 674 Return Air Grille • • • • One-piece steel construction 1/2"-spaced fins set at 40 degrees 7/8" margin turnback Complementary return air grille for 1/2"-spaced products • Bright White enamel finish Engineering Data on Page 110, 115 664 Available Siz
Sidewall Registers & Grilles Sidewall Registers & Grilles Model 3 Sidewall Stud Frame • All-steel construction HT • Extension arms fasten directly to 4 6 studs • Provides solid foundation for register and stackhead • Permits good plaster base right up to frame 301 Register • All-steel one-piece stampedface curved-blade construction • One-way deflection • One-way air pattern • For sidewall or ceiling application • Multi-shutter valve • Listed heights 10" and larger require double valves • Bright White enam
Sidewall Registers & Grilles 302 Available Sizes (in.
Sidewall Registers & Grilles Sidewall Registers & Grilles A303 Register • Aluminum one-piece stampedHT face curved-blade construction 4 • For sidewall or ceiling application 6 8 • Three-way deflection 10 • Three-way air pattern 12 • Galvanized multi-shutter valve • Listed heights 10" and larger require double valves • Bright White enamel finish 304 Register • All-steel one-piece stamped-face curved-blade construction • Four-way deflection • Four-way air pattern • For sidewall or ceiling application • Mult
Sidewall Registers & Grilles Sidewall Registers & Grilles 300M Series Register • All-steel construction with metal handle • Stamped curved-blade supply register with multi-louver damper for ceiling or sidewall installation • Stamped, one-piece face with multi-louver damper for volume control • Available in 1-way, 2-way, 3-way and 4-way airflow patterns • Bright White finish HT 4 6 8 10 12 301M Available Sizes (in.) WIDTH 6 8 10 12 X X X X X X X X X X X 302M Available Sizes (in.
Sidewall Registers & Grilles Sidewall Registers & Grilles A611MS/A611OB Register A611 Available Sizes (in.) WIDTH 6 8 10 12 X X X X X X X X X X X • • • • • HT Aluminum face/fin construction For sidewall or ceiling application 4 6 One-way deflection 8 One-way air pattern 10 Adjustable curved blades 12 increase deflection control • Galvanized multi-shutter valve or opposed-blade damper • Bright White finish A612MS/A612OB Register 14 X X A612 Available Sizes (in.
Sidewall Registers & Grilles HT A614 Available Sizes (in.
Sidewall Registers & Grilles Sidewall Registers & Grilles 621 Register • All-steel construction • For heating or cooling • Ideal for shallow duct installations • Used for ceiling or sidewall installations • Four-way deflection • 1/3" spaced fins set at 20 degrees • Multi-shutter valve • 1-5/8" depth when fully opened • Interlocking valve louvers for positive shut-off • Bright White finish HT 6 8 10 12 14 16 621 Available Sizes (in.
Sidewall Registers & Grilles • Aluminum construction • 1/3" spaced fins set at 20 degrees • Exceptional free area • 5/16" Margin Turnback • Bright White finish HT 6 8 10 12 14 651Register • • • • • All-steel construction • 1/3" spaced fins set at 20 degrees • Effectively conceals filter • Use standard 1" thick disposable filters (not included) • Removable face for easy installation and cleaning Average face velocity = 390 FPM, • Equipped with adjustable based on filter capacity rating of 2 CFM filter re
Sidewall Registers & Grilles Sidewall Registers & Grilles 661 Register Available with fusible link option, limited sizes (not UL-listed or firerated) • All-steel construction • Used for ceiling or sidewall installations • For heating or cooling • Ideal for shallow duct installations • Two-way deflection • 1/3" spaced fins set at 20 degrees • Galvanized multi-shutter valve • 1-5/8" depth when fully opened • Interlocking valve louvers for positive shut-off • Bright White finish HT 6 4 X 5 6 X 8 10 12 No
Sidewall Registers & Grilles • All-steel construction • 1/2" spaced fins set at 40 degrees • Exceptional free area • 5/16" Margin Turnback • Bright White finish 673 Return Air Filter Grille HT 6 4 X 6 X 8 10 12 X 14 16 18 20 24 25 30 HT 10 8 X X X X 12 672 Available Sizes (in.
Sidewall Registers & Grilles Sidewall Registers & Grilles 682 Register Available with fusible link option, limited sizes (not UL-listed or firerated) • All-steel construction • Used for ceiling or sidewall installations • Ideal for shallow duct installations • Two-way deflection • 1/2" spaced fins set at 40 degrees • Multi-shutter valve • 1-5/8" depth when fully opened • Interlocking valve louvers for positive shut-off • Bright White finish HT 6 4 X 5 6 X 8 10 12 683 Register • • • • • • • All-steel
Sidewall Registers & Grilles • All-steel construction with metal handle • Stamped, straight-blade supply register with multi-louver damper for ceiling or sidewall installation • Stamped, one-piece face with multi-louver damper for volume control • Fins spaced on ½" centers at 40 degrees • Available in 1-way, 2-way, 3-way and 4-way airflow patterns • Bright White finish 681M Available Sizes (in.) WIDTH HT 8 10 12 14 16 18 20 4 X 6 X X X X X 8 X 682M Available Sizes (in.
Rezzin™ Registers & Diffusers Rezzin™ Registers & Diffusers RZ682 Plastic Sidewall/ Ceiling Register • • • • Engineered polymer construction Two-way deflection Traditional styling Integral multi-shutter damper with easy-to-use damper handle • For heating or cooling applications • Bright White finish RZ683 Plastic Sidewall/Ceiling Register • • • • Engineered polymer construction Three-way deflection Traditional styling Integral multi-shutter damper with easy-to-use damper handle • For heating or cooling
Rezzin™ Registers & Diffusers RZSRT Available Size (in.) 24 x 24 • Engineered polymer construction • Four-way deflection • Available with RZSR square-to-round, ordered separately • Bright White finish • Contains metal screws RZMCDST Plastic T-Bar Modular Core Diffuser RZMCDST Available Size (in.
Rezzin™ Registers & Diffusers Rezzin™ Registers & Diffusers RZ421 Plastic Floor Diffuser • Solid ABS construction for floor use • Multi-angled fins for fan pattern of air distribution • Foot-operated, opposed-blade damper • Bright White or Golden Sand finish RZ500 Plastic Square Ceiling Diffuser • • • • • • • • RZ503 RZ421 Available Sizes (in.) WIDTH HT 10 12 2 X 4 X X RZ500 Available Size (in.
Laundry Chute Door Laundry Chute Door (LCD) • Steel construction • Spring-hinged, push-in door • Quiet closing, inner rubber guards • White, baked enamel finish • Two sizes available, 10" and 12" • Not fire-rated Model LCD10 A Diameter 8½ B Square 12 C Square 11 D Square 9¾ LCD12 10 13¼ 12¼ 11¼ Laundry Chute Door Laundry Chute Door Sizes (in.
Ceiling Diffusers Ceiling Diffusers 11 Duct Ring 11 Available Sizes (in.) 6, 8, 10, 12, 14, 18 • All-steel construction • For installation of #16 diffuser when not using a damper • Golden Sand enamel finish Size A 71/2 6 8 91/2 10 107/8 12 127/8 14 147/8 18 183/16 12 Butterfly Damper • All-steel construction • Controls air volume evenly over entire #16 diffuser • Removable knob operator for adjustment from closed to fully open • Golden Sand enamel finish 12 Available Sizes (in.
Ceiling Diffusers 21 Installation Frame • All-steel construction • Golden Sand enamel finish 21 Available Sizes (in.) 6, 8, 10, 12, 14, 16, 18, 20, 22, 24 Ceiling Diffusers Note: Not furnished with #24 diffuser. Not required when using 22 Butterfly Damper or 23 Opposed Blade Damper. Cannot be used with SD and SDD.
Ceiling Diffusers 24 Square Ceiling Diffuser Ceiling Diffusers Only available in sizes shown.
Ceiling Diffusers A503MS/A503OB Square Ceiling Diffuser T-Bar Panel available (see page 34) Extruded aluminum construction Cores flush with margin Three-way air diffusion Face mount for easy installation For sidewall or ceiling application • Multi-shutter or opposed-blade dampers - aluminum • Inconspicuous fingertip lever for air volume control • Bright White finish A504MS/A504OB Square Ceiling Diffuser 6 8 10 12 14 HT 6 Extruded aluminum construction 8 Cores flush with margin 10 Four-way air diffusio
Ceiling Diffusers Ceiling Diffusers A500P T-Bar Panel for A500 Series Diffusers A500P T-Bar Panel Available Sizes (in.
Ceiling Diffusers ECBX 4-way Ceiling Diffuser Box ECBX Available Sizes (in.) 14x14, 18x18, 20x20, 22x22, 24x24, 30x30, 36x36 ECSD/ECSDD Diffuser • Heavy-duty steel construction • For evaporative coolers or central blower systems • Step-down design louvers provide four-way air delivery • Face only ECSD with slide in plate for offseason closure • Multi-shutter damper on ECSDD • Countersunk mounting holes for flush appearance with screws provided • Bright White finish ECSD/ECSDD Available Sizes (in.
Sundry 65 & 66 Damper Sundry • For use in 5" (65) to 6" (66) round pipe • Furnished with handle, washer and wing nut • Has one bearing 607/608 Damper • Two bearings • For use in 7" (607) to 8" (608) round pipe • Furnished with handle, washer and wing nut 506/507/508 Damper • • • • 36 Steel warm-air damper 6" (506), 7" (507) and 8" (508) sizes Spindle is reversible and may be inserted from either end The heavy spring holds damper securely under most conditions
Sundry 69 Regulator Set • • • • • 704 Washer 705 Handle 706 Wing Nut 708 (one) 5/16" Bearing For small dampers Sundry 69 and 70 regulator sets are furnished with retractable bolt bearing for fast, easy assembly. Merely slip bearing over edge of damper at the bearing line, lay the bearing on any firm surface, and drive the prong through the damper. The prong firmly clinches the bearing to the damper. 5/16" bearings are ample for most damper installations. Maximum damper thickness: .022, 22 gauge galv.
Sundry 102 Damper Tip Sundry • Fixed bearing • Has same fastening features as No. 708 retractable bolt bearing 2 Casing Clip • For fastening casings and drawbands • 14-gauge steel 27 Casing Clip • For fastening casings and drawbands • 16-gauge steel Accessories • 704 Washer • 705 Handle • 706 Wing Nut • 708 - 5/16" Bearing only • 60 - 3/8" Regulator only (square shank) - Same as furnished with 80-3/8 Regulator Set. Required separately when 3/8" square rod is used instead of bearings. Use No.
