Brochure

T-Bar Return-Air Filter Grilles
53
Engineering Data on Page 112
96AFBT
Steel
Fixed-Bar Filter
Grille
• All-steel construction
• Bar-style face design
• Flush, removable face with
concealed latches and hinges,
can be installed in any direction
• Uses standard 1” disposable
filters (not furnished)
• Bright White finish
• Specify 96AFBT2
for 2” filters
96AFBT Available Sizes
20” x 20”, overall 23
3
/4” x 23
3
/4”
44” x 20”, overall 47
3
/4” x 23
3
/4”
Molded Fiberglass Back
R4.2, R6 & R8
• These fiberglass backs are sold
separately for field installation.
(Glue or double sided tape
recommended)
• Available in 4.2, 6.0 and 8.0 “R” values
• Recommended for T-bar diffusers
without steel back panel
• Accepts 6”-14” tab collars (6400
series) or 6”-18” snap in collar (5400 &
5400PP Series)
• Accepts standard spin-in collar
• Bonded foil vapor barrier minimizes
condensation
• Fiberglass back meets or exceeds the
following tests and ratings:
Meets 25/50 tested in accordance with
A.S.T.M. E84 (UL723)
UL181 Erosion and Impact Test, and
will not support microbial growth
Note: Attachment of molded fiberglass
back and 5400 collar requires
5400PP (push pins).
673TPI R6
Steel
Filter Grille
• Steel construction
• Lanced-face design with 1/2” blade
spacing
• Flush, face with screwdriver latches and
piano hinges can be installed in any
direction
• Plenum box with R6 insulated
ductboard
• Uses standard 1” disposable filters
(not furnished)
• Bright White finish
673TPI R6 Available Size
20” x 20”, overall 23
3
/4” x 23
3
/4”
T-Bar Return-Air Filter Grilles