Brochure

ManualsBrandsHart & Cooley Manuals1/2 Inch Spacing (672 Series)16" x 8" (Wall Opening Size) White Sidewall/Ceiling Return Air Grille (672 Series)

Offered by,

Hart & Cooley

5030 Corporate Exchange Blvd. SE

Grand Rapids, MI 49512

P (800) 433-6341

F (800) 223-8461

hartandcooley.com

Form No. 851531 03/2016

install confidence.

Commercial

Grilles, Registers & Diffusers

Edition 11

Summary of content (132 pages)

PAGE 1
Hart & Cooley 5030 Corporate Exchange Blvd. SE Grand Rapids, MI 49512 P (800) 433-6341 F (800) 223-8461 hartandcooley.com Offered by, Form No. 851531 03/2016 install confidence.
PAGE 2
PAGE 3
PAGE 4
Table of Contents Product Information Engineering Data REGISTERS & GRILLES—STEEL 800 Series Curved Blade Steel One Through Four-Way........................................................5 821 Vertical Single Deflection, w/MS...........................................................................6......................... 77 831 Horizontal Single Deflection, w/MS......................................................................6......................... 77 92HVO Double Deflection Horizontal Face...
PAGE 5
Table of Contents Table of Contents LIGHT COMMERCIAL Product Information Engineering Data CEILING DIFFUSERS—STEEL 20 Round Adjustable...............................................................................................28......................... 86 19 Round OB Damper.............................................................................................28 24 Steel Square (Ceiling) Diffuser...........................................................................29........................
PAGE 6
Table of Contents T-BAR RETURN 659T 659TI 673T 673TI 673TPI R6 96AFBT 96AFBTI RHF45T RCBFT REF5T REF5TI PFT PFTI Product Information Engineering Data AIR FILTER GRILLES Steel—Lanced Face...........................................................................................52....................... 112 Steel—Lanced Face with Fiberglass Back........................................................52....................... 112 Steel—Filter Grille..........................................................
PAGE 7
Table of Contents Table of Contents T-BAR GRILLES & DIFFUSERS Product Information SBP PDS PDSD PDR PD Engineering Data Steel—Perforated Face Shallow Back...............................................................65....................... 114 Steel—Perforated Face with Fixed Deflector.....................................................66....................... 113 Steel—Perforated Face with Adjustable Deflector.............................................66.......................
PAGE 8
Registers & Grilles - Steel 800 Series Steel construction Curved Blade design 1 - 4-way or 2-way corner air diffusion Available with or without damper Damper options: Multi-Shutter or Opposed Blade Individually adjustable bars for easy positive setting Opposed Blade damper is screwdriver operated Bright White finish Registers & Grilles - Steel • • • • • • • • 800 Series Available Sizes (in.
PAGE 9
Registers & Grilles - Steel 821 Registers & Grilles - Steel • All-steel construction • Vertical adjustable face bars • Horizontal multi-shutter valve • Bright White finish Note: Screw hole location details on page 119 HT 4 5 6 8 10 12 14 16 18 20 24 HT • • • • • • All-steel construction Horizontal adjustable face bars Vertical valve Adjustable multi-shutter valve Bright White finish 3/4” fin spacing Note: Screw hole location details on page 119 6 8 X X X X HT HT 4 6 8 10 12 14 831 6 X 6 84 1
PAGE 10
Registers & Grilles - Steel 5 6 8 10 12 14 16 18 20 24 X X X X X X X 92HVO Register • • • • • X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X All-steel construction 831 Available Sizes (in.) AdjustableHT face bars may be setWIDTH to any desired deflection 8 10 12 14 16 20 24 30 32 36 Horizontal front bars 821 Available Sizes (in.
PAGE 11
36 92HVO Available Sizes (in.) 92HVV Available Sizes (in.
PAGE 12
32 34 36 Registers & Grilles - Steel X X X X X X 94 Available Sizes (in.
PAGE 13
Registers & Grilles - Steel 94AHOV Register • • • • Registers & Grilles - Steel • 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 HT 4 56 4 X All-steel construction 5 6X 6 8X 3/4” spaced fins set at 35°, 8 10 10 horizontal face bars set at 35° 12 12 14 14 16 Opposed-blade damper 18 16 20 Larger sizes available in multiple- 2218 24 20 piece construction 26 22 28 Bright White finish 30 24 32 26 34 36 28 30 Note: 32 HT 3410 10 12 36 HT 14 16 18 20 X 24 HT 25 30 36 4 5 6 HT 810 6 X 10 8 X 10 12 X 12 14 14 16
PAGE 14
Registers & Grilles - Steel 92OOV Damper PFG Perforated Face Grille • All steel construction • Perforated face • Optional opposed blade damper • Optional T-Bar lay-in frames • Bright white finish Engineering Data on Page 77-79 9200V Available Sizes (in.) Minimum: 6” x 4” Maximum: 24” x 24” One Piece Registers & Grilles - Steel • Steel construction • Opposed-blade damper • Controls the air volume from full flow to shut-off • Mill finish • For use with: - 92 - 94 - RE5 - PFG PFG Available Sizes (in.
PAGE 15
Registers & Grilles - Aluminum HX Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Horizontal front bars • Single row of individually adjustable horizontal face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 120 HT 4 X X X X 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 HT 48 4 5 6 HT 8 6 10 4 X 5 12 X 6 14 X 8 16 10 18 12 20 14 22 16 24 18 26 20 28 22 30 24 32 26 34 28 36 30 38 3
PAGE 16
Registers & Grilles - Aluminum 4 X X X X 6 X X X X 8 X X X X 10 6 X 8 X 10 X 12 X 14 X HM Register • • • • • HT Note: Screw hole location details on page 120 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 8 X X X X 10 12 X HT X X X 4 X X 5 X X 6 X X 8 X 14 X6 X X X X X X X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 X X X X X 40 X X XX XX XX XX XX XX XX X XX XX XX XX XX 30X 32X34X36 X 38 X X X X X XX XX X XX XX XX XX X XX XX XX XX X XX XX XX XX X XX XX XX XX X XX
PAGE 17
Registers & Grilles - Aluminum HVD Register Registers & Grilles - Aluminum • • • • • Extruded aluminum construction Two rows of individually adjustable face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized finish Note: Screw hole location details on page 120 14 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 648 X X X HT 6 X X X 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X 16 X X X X
PAGE 18
40 42 44 46 48 Registers & Grilles - Aluminum VD Register Note: Screw hole location details on VM Register Note: Screw hole location details on page 120 HT 6 8 10 4 X X X 5 X X X 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 Engineering Data on Page 80-81 VM Available Sizes (in.
PAGE 19
Registers & Grilles - Aluminum VH Register Registers & Grilles - Aluminum • • • • • • Extruded aluminum construction Vertical front bars Horizontal second bars Two rows of individually adjustable face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Bright White or Satin Anodized finish Note: Screw hole location details on page 120 HT 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38
PAGE 20
Registers & Grilles - Aluminum CH 1 Grille • • • • • Extruded aluminum construction One-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Bright White or Satin Anodized finish CHD1 Register • • • • • • Extruded aluminum construction One-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized finish Note: Screw hole location details on page 120 CHM1 Register • • • • • •
PAGE 21
Registers & Grilles - Aluminum CH2 Grille Registers & Grilles - Aluminum • • • • • Extruded aluminum construction Two-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Bright White or Satin Anodized finish Note: Screw hole location details on page 120 CHD2 Register • • • • • • Extruded aluminum construction Two-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized f
PAGE 22
Registers & Grilles - Aluminum C3 Grille Note: Screw hole location details on page 120 CD3 Register • Extruded aluminum construction • Three-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized finish Note: Screw hole location details on page 120 CM3 Register • Extruded aluminum construction • Three-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Mu
PAGE 23
Registers & Grilles - Aluminum C4 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Four-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 120 CD4 Register • Extruded aluminum construction • Four-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized fi
PAGE 24
Registers & Grilles - Aluminum CH2CL Grille Note: Screw hole location details on page 120 CH2CR Grille • Extruded aluminum construction • Two-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish X X X X X X X HT 6 6 X HT 8 6 106 X 128 10 14 12 16 14 18 16 20 18 22 20 24 22 26 24 28 26 30 28 32 30 34 32 36 34 36 8 X 8 X X X 10 X 10 X X X X X 8 X 8 X X X 10 X 10 X X X X X 6 8 6 X X 8 X 10 12 14 16 18 20 22 24 26 28
PAGE 25
Registers & Grilles - Aluminum RCB Grille RCBD Register Registers & Grilles - Aluminum • • • • Extruded aluminum construction Curved blades fixed on one-inch spacing Opposed-blade damper Bright White or Satin Anodized finish HT Blades at 40° angle 6 8 10 12 14 38 40 42 44 46 48 4 X X X X X X X X X X X 5 X X X X X X X X X X X 6 X X X X X X X X X X X 8 X X X X X X X X X X X 10 X X X X X X X X X 12 X X X X X X X X 14 X X X X X X X 16 X X X X X X 18 X X X X X X 20 X X X X X X 22 X X X X X X 24 X X X X X X
PAGE 26
Registers & Grilles - Aluminum RE5 Grille • • • • X X X X X X X X X X X X X X X X X 48 XX XX XX XX XX X X X X X Registers & Grilles - Aluminum 6 X X X X X X X X XX XX X XX XX XX XX XX XX XX XX XX XX XX 22 8 X X X X X X X X XX X XX XX XX XX XX XX XX XX XX XX XX 24 10 X X X X X X X X X XX XX XX XX XX XX XX XX XX XX XX 26 12 X X X X X X X XX XX XX XX XX XX XX XX XX XX XX 28 14 X X X X X X X X XX XX XX XX XX XX XX XX XX XX 30 16 X X X X X X X X XX XX XX XX XX XX XX XX XX 32 18 X X X X X X X XX XX XX XX XX XX
PAGE 27
Registers & Grilles - Aluminum REF5 Filter Grille, Grid Core Registers & Grilles - Aluminum • • • • • • All-aluminum construction 1/2” x 1/2” x 1/2” square core design Accommodates standard 1” thick disposable filter (not included) Filter grilles equipped with quarter turn fasteners Bright White or Mill finish Specify REF52 for 2” filter HT 6 8 10 12 4 X X X X 5 X X X X 6 X X X X 8 X X X 10 X X 12 X 14 16 18 20 22 24 25 26 28 30 32 34 36 HT 4 6 8 10 12 4 X X X X X 5 X X X X X 6 X X X X X 8 X X X X X
PAGE 28
REF5 Available Sizes (in.) WIDTH 6 8 10 12 14 16 18 20 22 24 25 26 28 30 32 34 36 4 X X X X X X X X X X X X X X X X 5 X X X X X X X X X X X X X X X X 6 X X X X X X X X Available X X SizesX (in.
PAGE 29
Registers & Grilles - Aluminum RH90 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Face bars permanently fixed into heavy aluminum frames at a 90-degree angle from face • Bright White or Satin Anodized finish HT 40 42 44 46 48 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X RH90 Available Sizes (in.
PAGE 30
Registers & Grilles - Aluminum TG Transfer Grille • • • • • TGF Transfer Grille Frame HT 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 RHD90 Available Sizes (in.
PAGE 31
Ceiling Diffusers - Steel 20 Round Diffuser Ceiling Diffusers - Steel • Steel construction • For ceiling or exposed duct installation • Five-step positioning of air pattern adjustment • 360-degree pattern, horizontal to vertical pattern change • Removable center core • Diffuser outer shell fastens directly to duct; margins fit tight to ceiling for optimum ceiling appearance • Optional #19 damper; duct-mount only • Bright White finish Listed Size A B C Pos. 1 C Pos.
PAGE 32
Ceiling Diffusers - Steel 24 Square Ceiling Diffuser • All-steel construction • Step-down face deflects air stream 360 degrees • Bright White finish Only available in sizes shown. • All-steel construction • Golden Sand enamel finish • Used but not furnished with #24 ceiling diffusers. Ceiling Diffusers - Steel 21 Installation Frame 24 Ceiling Diffuser (in.) Free Area No. of Size Sq. Inches Cones 6 41 3 8 65 3 10 84 3 12 123 4 14 152 4 16 199 5 18 236 5 20 293 6 22 338 6 24 404 7 21 Available Sizes (in.
PAGE 33
Ceiling Diffusers - Steel HT SRE Diffuser • • • • Steel construction Removable core Flat margin style Optional opposed blade damper available for field installation (see SR7 damper) • Bright White enamel finish Ceiling Diffusers - Steel See page 34 for available air patterns.
PAGE 34
Ceiling Diffusers - Aluminum ARE Diffuser See page 34 for available air patterns. HT 6 9 12 15 18 21 24 27 30 33 36 6 9 12 15 HT 18 216 249 12 27 15 30 18 33 21 36 24 27 30 HT 33 36 6 • Extruded aluminum construction • Removable core • Flush margin style • Optional factory-mounted, aluminum opposed-blade damper available as ARFD • Bright White or Satin Anodized finish See page 34 for available air patterns.
PAGE 35
15 18 21 24 27 30 33 36 Ceiling Diffusers - Aluminum X ARS Diffuser Ceiling Diffusers - Aluminum • Extruded aluminum construction • Removable core • Beveled (step-down) margin style • Optional factory-mounted, aluminum, opposed-blade damper available as ARSD • Bright White or Satin Anodized finish See page 34 for available air patterns.
PAGE 36
Ceiling Diffusers - Steel/Aluminum Neck View Type SR & AR Air Patterns Style Listed Sizes 6x6 9x9 12x12 15x15 18x18 21x21 9x6 to 45x6 12x9 to 45x9 15x12 to 45x12 18x15 to 45x15 21x18 to 45x18 STYLE 4 STYLE 3 24x21 to 45x21 27x24 to 45x24 30x27 to 45x27 33x30 to 45x30 36x33 to 45x33 24 x 21 Max. in Steel 9x6 to 36x6 12x9 to 36x9 15x12 to 36x12 18x15 to 36x15 21x18 to 36x18 STYLE 3S 24x24 27x27 30x30 33x33 36x36 24x21 to 36x21 27x24 to 42x24 30x27 to 42x27 33x30 to 42x30 36x33 24 x 21 Max.
PAGE 37
Ceiling Diffusers - Aluminum ASRE Diffuser • • • • • • Extruded aluminum construction Flat margins overlap opening For use with roof-mounted installations Removable core Return damper available - AR7 Supply damper available - AS7 Ceiling Diffusers - Aluminum • Bright White or Satin Anodized finish ASRS Diffuser • Extruded aluminum construction • Step-down (beveled) margins overlap opening and lowers the diffuser from the ceiling • For use with roof-mounted installations • Removable core • Bright White o
PAGE 38
Ceiling Diffusers - Aluminum MCD Adjustable Modular Diffuser MCD Available Sizes (in.) 6” x 6”, 8” x 8”, 10” x 10”, 12” x 12”, 14” x 14”, 16” x 16”, 18” x 18”, 20” x 20”, 22” x 22” MCDD Adjustable Modular Diffuser Ceiling Diffusers - Aluminum • Extruded aluminum construction • Four modular cores provide variable pattern adjustments of four-way, three-way, twoway, or one-way horizontal air patterns • Flat margin • Fixed fins • Bright White finish MCDD Available Sizes (in.
PAGE 39
Ceiling Diffusers - Aluminum MCDSD Adjustable Modular Diffuser MCDSD Available Sizes (in.
PAGE 40
Spiral Diffusers Model SV Single-Deflection Diffuser Model SVH Double-Deflection Diffuser Size restrictions apply. See price list for sizes and ordering information. Engineering Data on Page 99 SVH Available Sizes (in.
PAGE 41
Spiral Diffusers Model USVH Double Deflection Universal Diffuser Spiral Diffusers Size restrictions apply. See price list for sizes and ordering information. USVH Available Sizes (in.
PAGE 42
Linear and Slot Diffusers LS/LF Series Diffuser Note: Floor application must be ordered as “LF.” Eight-inch maximum width for constant traffic; 12” maximum width for occasional traffic; maximum length 72”.
PAGE 43
Linear and Slot Diffusers L Series - Dimensional Data Linear and Slot Diffusers Mounting Style 0 (Floor/Sill) LF Mounting Style 1 (Ceiling) LS Mounting Style 3 Mounting Style 2 (Ceiling/Sidewall) LS Mounting Style GO Mounting Style 00 (Bars Only) 00 Bar Style Only w/o Mounted Damper or Control Grid (Ceiling/Sidewall) LS (Concrete/Tile) LF BAR STYLES Note: Quantity of bars = 2 x listed width minus 2. Example: 4” listed width = 4” x 2 = 8 minus 2 = 6 bars.
PAGE 44
Linear and Slot Diffusers L Series Single-Leaf Damper Option • Aluminum construction • Leaf type for sizes 11/2” to 3” Note: Order with desired diffuser for attachment at factory. Cannot be used with hanger brackets. Linear and Slot Diffusers L Series G Grid Option • Aluminum construction • Individual adjustable blades • Cannot be used with hanger brackets Note: G Grid blades are assembled parallel to short dimension. Order with desired diffuser for factory fitting.
PAGE 45
Linear and Slot Diffusers MARGIN STYLE SLOT S Series Slot Diffusers DIFFUSER ONLY with Hanger Bracket with No. 2 Standard Mounting Style 0 Mounting Style 1 Mounting Plaster Frame BO B1 B2 EO E1 E2 with No. 3 Wall-Mounting Plaster Frame B3 1” / 1 /2 ” 3 4” Linear and Slot Diffusers End Cap with No.
PAGE 46
Linear and Slot Diffusers Damper Single-leaf dampers are furnished in each slot opening throughout the entire diffuser length when specified. Dampers are fastened to the margin and are spring-loaded to hold their setting at all duct pressures. Multiple dampers are furnished for grille lengths over 24 inches. Dampers are part of the S Series and are not specified separately.
PAGE 47
Linear and Slot Diffusers STYLE B0 STYLE B1 Also for T-Bar applications Linear and Slot Diffusers Order 223/4” or 463/4” lengths with End Caps. Duct width equals overall width. * *Overall width is only 5/16” greater than the duct width.
PAGE 48
Linear and Slot Diffusers STYLE E1 STYLE E0/F0 Also for T-Bar applications Linear and Slot Diffusers For E0, order 22” and 46” lengths with End Caps.
PAGE 49
Linear and Slot Diffusers S Series Mitered Corners Mitered Corner Sections Order as: S 90-degree mitered corners are available as factory-fabricated section. Precise factory cutting and assembly reduces field fabrication time and assures proper fit. Corner sections are furnished and blanked off. Corner sections butt to adjacent straight sections, which are spliced together with aligning keys. Linear and Slot Diffusers Mitered corners are furnished in style #4 (with pattern controller and damper).
PAGE 50
Louvers DL Drum Louver • All-aluminum construction • Horizontal and vertical air stream control • Galvanized, opposedblade damper (optional) • Adjustable drum and vane design • White or Mill finish Drum Louver Available Sizes 6” x 12”, 6” x 18”, 6” x 24”, 6” x 30”, 6” x 48”, 6” x 60” 10” x 20”, 10” x 25”, 10” x 30”, 10” x 35”, 10” x 40”, 10” x 50” 12” x 30”, 12” x 40”, 12” x 50”, 12” x 70” 15” x 30”, 15” x 50”, 15” x 60”, 15” x 70” Order H x W Louvers Duct Opening Sizing Listed Height Size Duct Openin
PAGE 51
Louvers BV Brick/Block Vent • Extruded aluminum construction • Standard masonry size • Maximum water protection • 6063-T5 extruded aluminum alloy • 18 x 16 mesh aluminum insect screen standard • 4” standard depth • Satin Anodized finish Note: To order specify Model, Depth, Finish Example: BV168 4 SA DIMENSIONS/FREE AREA Louvers BV Model STANDARD BRICK JUMBO BRICK MODULAR BLOCK Masonry Opening Size A B Width Inches Height Inches Free Area Sq. Ft. 802 ONE BRICK 8 2 1/ 2 .
PAGE 52
Louvers 4ABC Adjustable Louver • • • • • • • • Extruded aluminum construction Adjustable baffle blades on 4” centers 4” louver depth Channel frame Max.
PAGE 53
Louvers 245ZC Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2” louver depth Channel frame Available with bird screen or insect screen • Mill finish standard Louvers 245ZF Shown 245ZF Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2” louver depth Flange frame Available with bird screen or insect screen • Mill finish standard 445ZC Stationary Louver • • • • • • Extrude
PAGE 54
T-Bar Construction Features T-Bar Construction Features Our popular supply and return products for T-Bar A unique modular collar system provides a standard ceilings are an innovative response to the challenge of collar and damper unit, which can be shared between creating a better indoor environment. T-Bar products a number of different T-Bar products.
PAGE 55
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 659T Steel Lanced Filter Grille 659T / 659TI Available Sizes 20” x 20” with extended frame (overall 233/4” x 233/4”) for 24” x 24” openings 44” x 20” with extended frame (overall 473/4” x 233/4”) for 48”x24” opening (659T only) • Steel construction • Lanced-face design with 1/3” blade spacing • Flush, removable face with concealed latches and hinges can be installed in any direction • Uses standard 1” disposable filters (not furnished) • Bri
PAGE 56
673TPI R6 Steel Filter Grille T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 673TPI R6 Available Size 20” x 20”, overall 233/4” x 233/4” • Steel construction • Lanced-face design with 1/2” blade spacing • Flush, face with screwdriver latches and piano hinges can be installed in any direction • Plenum box with R6 insulated ductboard • Uses standard 1” disposable filters (not furnished) • Bright White finish Molded Fiberglass Back R4.
PAGE 57
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 96AFBTI Steel Fixed-Bar Filter Grille with Fiberglass Back See page 54 for fiberglass specifications. 96AFBTI Available Size 20” x 20”, overall 233/4” x 233/4” • Steel construction • Bar-style face design • Flush, removable face with concealed latches and hinges, can be installed in any direction • R4.
PAGE 58
REF5T/REF5TI Aluminum Egg Crate Filter Grille REF5T/ REF5TI REF5T only T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles Available Sizes 20” x 20” with extended frame (overall 233/4” x 233/4” ) for 24” x 24” openings 44” x 20” with extended frame (overall 473/4” x 233/4”) for 48” x 24” openings • Aluminum and steel construction • Egg crate style face • Non-removable face, hinged to filter frame • Mount flush with T-Bar ceilings • REF5T with thumb screw fasteners, REF5TI with cam lock • Use
PAGE 59
T-Bar Return-Air Grilles T-Bar Return-Air Grilles 94AT Steel Bar-Style Return Grille 94AT Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 46” x 22” (overall 473/4” x 233/4”) for 48” x 24” openings • Steel construction • Mount flush with T-Bar ceilings • Bright White finish RH45T Aluminum Bar-Style Return Grille RH45T Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 46” x 22” (overall 473/4” x 233/4”) for 48” x 24” openings • Extruded aluminum constr
PAGE 60
T-Bar Return-Air Grilles • • • • T-Bar Return-Air Grilles RE5T Aluminum Egg Crate Return Grille RE5T Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 22” x 46” (overall 473/4” x 233/4”) for 48” x 24” openings All aluminum construction Egg crate style face Mount flush with T-Bar ceilings Bright White or Mill Aluminum finish RE5TI Aluminum Egg Crate Return Grille with Insulated Back RE5TI Available Size grid core face 1/2” x 1/2” x 1/2” • • • • All aluminum construction Egg
PAGE 61
T-Bar Surfaire/Renovator Diffusers T-Bar Surfaire/Renovator Diffusers 444 SurfAire® Aluminum Face Renovator Series Diffuser 444 Available Size overall size 233/4” x 233/4” • Aluminum face • Unique deflector apertures • Air distributed in thin layers along ceiling surface allowing optimum mixing of conditioned air • Formed galvanized steel back panel • Frame includes four seismic safety connections • Back plate covered with glass fiber insulation to reduce condensation • Aluminum foil vapor barrier protec
PAGE 62
8 HT T-Bar Rezzin Diffusers 4-Way Rezzin T-Bar Diffuser Rezzin T-Bar Modular Core Diffuser • Engineered polymer construction • Modular cores provide one, two, three, or fourway horizontal air patterns • Removable modules provide easy access to accessories • Available with Rezzin back panel, ordered separately • Bright White finish Rezzin Back Panel • • • • Engineered polymer construction Use 6400 Series Tab Collar Bright White finish Use with Rezzin Modular Core and Rezzin Egg Crate diffuser T-Bar Rezz
PAGE 63
Sq to Rd Available Sizes (in.) Square Size Round Neck 14 x 14 6 14 x 14 8 14 x 14 10 14 x 14 12 14 x 14 14 T-Bar Rezzin Diffusers Round Available Size (in.) 12" Rezzin Square Ceiling Diffuser Engineered polymer construction 12”x12” face 6”, 7” and 8” collars included Ratcheting cam lock–install without screws Removable core and integral damper Available in 4-way, 3-way and 2-way corner • Bright White finish • Contains metal parts T-Bar Rezzin Diffusers • • • • • • Square Available Size (in.
PAGE 64
T-Bar Fixed-Pattern/Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers HVS/HVS R6 Steel High-Volume Supply • • • • • • • • • • • • Steel construction Provides high air volume delivery 360-degree air diffusion Formed back panel Fixed core Fiberglass insulation blanket with foil vapor HVS Shown barrier to minimize condensation on HVS Insulation prescored to accommodate collar size desired R6 molded fiberglass back on HVS R6; use 5400 with 5400PP Accepts unique 2” high snap-in collar (5400 series) (6”
PAGE 65
T-Bar Fixed-Pattern Diffusers T-Bar Fixed-Pattern Diffusers FPD3/FPD3 R6 Steel Fixed-Pattern Diffuser • • • • • • • • • • • FPD3 T-Bar Available Size Overall Size 233/4” x 233/4” Steel construction Provides high air volume delivery 360-degree air diffusion Three cone fixed core Fixed collar 6” to 14” Unique 2” high collar permits easy flex connections Utilizes butterfly damper (3800 Series) inserted in collar–order separately Damper adjustable thru face Formed steel back panel Bright White finish FPD3 R
PAGE 66
T-Bar Fixed-Pattern/Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers DPD/DPD R6 Steel T-Bar Plate Diffuser DPD/DPD R6 Available Sizes 6” 8” 10” 12” 14” • Aesthetically appealing, single-face plate design • 360° air diffusion pattern • Detachable face plate • 2” fixed collar • Optional R6 insulated back (DPD R6) • White finish ADPD Aluminum T-Bar Plate Diffuser • Aesthetically appealing, single-face plate design • 360° air diffusion pattern • Detachable face plate • 2” fixed collar • Constructed
PAGE 67
T-Bar Fixed-Pattern Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers RENPS/ARENPS RENPS Available Size Overall 233/4” x 233/4” RENPS R6 Steel/Aluminum Perforated Supply Diffuser with Insulated Back • Perforated steel face with deflector • Molded fiberglass back panel, available in R4.
PAGE 68
T-Bar Perforated Supply/Return CBPS Curved-Blade Perforated Supply • Steel construction • Removable, hinged face allows for easy access to air pattern control core • Individually adjustable pattern deflectors factory-set at 4-way deflection; can be field-adjusted for 1, 2, 3-way air patterns • Available in 6”, 8”, 10”, 12”, 14” and 16” diameter necks • Unique 2” high collar permits easy flex connections • Accepts 3800 Series butterfly damper (order separately) • For 16”, use T19 • Bright White finish CBP
PAGE 69
T-Bar Perforated Supply/Return T-Bar Perforated Supply/Return PDS Steel Perforated Supply Diffuser PDS Available Size Overall Size 233/4” x 233/4” PDSD Steel Perforated Diffuser Supply PDSD Available Size Overall Size 233/4” x 233/4” (with fixed deflector) • Perforated steel face • Formed steel, black back panel • Fiberglass insulation blanket with foil vapor barrier to minimize condensation • Insulation prescored to accommodate collar size desired • Accepts unique snap-in collar (5400 Series) 6” to 12
PAGE 70
T-Bar Perforated Supply/Return PDR Available Size Overall Size 233/4” x 233/4” T-Bar Perforated Supply/Return PDR Steel Perforated Return Grille • 51% net free area • Available with 14”, 16”, or 18” fixed collars • Formed steel, black back panel • White finish PD Steel Perforated Return Face Only–No Back • Face only return for plenum ceilings • Available in 24” x 12”, 24” x 24” and 48” x 24” sizes • White finish Engineering Data on Page 113-114 67
PAGE 71
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser ART ART Available Sizes 6” x 6”, 9” x 9”, 12” x 12”, 15” x 15”, 21” x 21” Aluminum Note: For 18” x 18” neck, order ARE 18” x 18”.
PAGE 72
T-Bar Directional/Modular Diffuser MCDSDT T-Bar Directional/Modular Diffuser MCDSDT MCDSDT/MCDSDTSR Available Sizes 6” x 6”, 8” x 8”, 10” x 10”, 12” x 12”, 14” x 14”, Aluminum 16” x 16”, 18” x 18”, 20” x 20” Modular Core Diffuser with Damper • Extruded aluminum diffuser in aluminum panel • Modular cores provide one, two, three, and four-way air patterns • Removable modules provide easy access to damper • Aluminum opposed-blade damper • Available in 6” to 20” • Available as MCDSDTSR with square-to-round
PAGE 73
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser A500P Steel T-Bar Panel for A500 Series Diffusers A504MS/A504OB Four-way deflection A500P T-Bar Panel Available Size Opening 6” to 14” Overall 233/4” x 233/4” • Adapts A500 diffuser to T-Bar installation • Diffuser snaps in behind panel for clean appearance • Steel panel • Diffuser must be ordered separately • Bright White finish • Diffuser sizes 6”x6” to 14”x14” OB Damper A501MS/A501OB One-way deflection A502MS/A502OB Two-way def
PAGE 74
T-Bar Accessories 6400 Tab Collar 6” • Galvanized steel construction • For use with fiberglassbacked ceiling diffusers • Tabbed for easy installation • Accepts 3800 Series damper T-Bar Accessories 5400 Series Collar Ring* 6400 Series Available Sizes 8” 10” 12” 14” 5400 Series Available Sizes 6” 7” 8” 9” 10” 12” 14”* 16” 18” • Unique snap-in design for easy installation • 2” high collar permits easy flex connections • Bead on collar improves the strength and provides retention for flexible duct connect
PAGE 75
T-Bar Accessories T19 Series Damper • Multi-blade damper • Tabs for easy installation • For use with 5400 Series collar • Bright White finish Note: 3/16 hex operator by 6” 19 Series Available Sizes 8” 10” 12” 14” 16” T-Bar Accessories others RD Radial Damper • Galvanized steel construction • Face-adjustable • For use with round neck diffusers • Mill finish SMF Aluminum Surface Mount Frame • Aluminum construction • Permits installation of standard T-Bar diffusers in a plaster ceiling • Accepts standar
PAGE 76
Miscellaneous P Filler Panel • Steel or aluminum construction • Available in 9 sizes from 12” x 12” to 36” x 36” in 12” increments P Filler Panel Available Sizes 12” x 12”, 24” x 12”, 36” x 12”, 48” x 12”, 24” x 24”, 36” x 24”, 48” x 24”, 36” x 36” • Bright White finish Diffusers are factory-installed (must order with diffuser).
PAGE 77
Miscellaneous FT Flexiturn Miscellaneous • Extruded aluminum construction • Designed to pick up air from the main trunk at branch take-offs and divert it toward the grille • Mounts easily with sheet metal screws • Gang-operated blades move from 45 degrees open to fully closed • Positive setting • Mill finish APF Aluminum Plaster Frame • Aluminum construction • Provides attractive appearance for registers and grilles around plaster • Bright White finish 74 FT Flexiturn Available Sizes Minimum: 8” x 4” M
PAGE 78
Engineering Data Engineering Data Data Using the Engineering ForUsing most of theEngineering models & sizes we’ve done the calculations for you. the Data CFM volume air flow&insizes cubicwe’ve feet per For= most of theofmodels doneminute the calculations for you. 421 300 400 500 600 700 800 .006 .010 .016 .022 .031 .040 50 4.5 70 5.0 85 6.5 100 7.5 120 9.0 135 10.0 4.0 6.0 8.0 10.0 11.0 12.5 Noise – an increase in face velocity will create more noise.
PAGE 79
Unlisted Sizes_Engineering Data When a size is not listed there are a couple ways to do an eng principles permit you to utilize existing sizes to determine size Engineering Data Sizing a Return Air volume going back to the air handler (fan) must equal what is supplied from the air handler. Therefore the total AFM capacity of the return grilles must equal or exceed the total CFM capacity of all the supply diffusers.
PAGE 80
Engineering Data 821, 831, 92 Series and 98VOH (Page 6-8, 11) D ef lec t io n C D ef lec t io n A it y o ss C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w 40 0 50 0 6
PAGE 81
Engineering Data 821, 831, 92 Series and 98VOH (Page 6-8, 11) D ef lec t io n G T ermi n al V el o c i t y o f 75 F PM F ac e V elo c P r essu r e L 8x 4 A k . 119 10 x 4 A k . 143 12 x 4 A k . 173 14 x 4 A k . 202 12 x 5 A k . 220 10 x 6 A k . 222 14 x 5 A k . 258 12 x 6 A k . 268 16 x 5 A k . 296 14 x 6 A k . 314 16 x 6 A k . 360 20 x 5 A k . 372 24 x 5 A k . 448 20 x 6 A k . 453 24 x 6 A k . 545 20 x 8 A k . 614 30 x 6 A k . 683 24 x 8 A k . 739 30 x 8 A k . 926 24 x 10 A k . 932 36 x 8 A k 1.
PAGE 82
30 x 24 Ak 3.540 36 x 24 Ak 4.220 30 x 30 Ak 4.390 36 x 30 Ak 5.220 48 x 24 Ak 5.540 36 x 36 Ak 6.180 48 x 36 Ak 8.020 48 x 48 Ak 10.300 CFM Ps CFM Ps CFM Ps CFM Ps CFM Ps CFM Ps CFM Ps CFM Ps 1062 .007 1266 .008 1317 .008 1565 .010 1662 .011 1855 .012 2407 .012 3089 .012 1416 .011 1688 .013 1756 .013 2087 .015 2217 .016 2473 .017 3210 .024 4119 .024 1770 .021 2110 .024 2194 .024 2608 .029 2771 .030 3091 .034 4012 .034 5148 .034 Engineering Data 2124 .031 2532 .035 2633 .036 3130 .041 3325 .043 3709 .
PAGE 83
Engineering Data H and V Series (Page 12-16) D ef lec t io n A it y o ss C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w C F M T h ro w D ef lec t io n C 40 0 50 0 6 0 0 7 0 0 .
PAGE 84
Engineering Data H and V Series (Page 12-16) D ef lec t io n E D ef lec t io n G F ac e V elo c P r essu r e L 8x 4 A k . 118 10 x 4 A k . 149 12 x 4 A k . 181 14 x 4 A k . 212 12 x 5 A k . 233 10 x 6 A k . 236 14 x 5 A k . 274 12 x 6 A k . 286 16 x 5 A k . 315 14 x 6 A k . 336 16 x 6 A k . 386 20 x 5 A k . 397 24 x 5 A k . 478 20 x 6 A k . 486 24 x 6 A k . 586 20 x 8 A k . 665 30 x 6 A k . 736 24 x 8 A k . 802 30 x 8 A k 1. 010 24 x 10 A k 1. 020 36 x 8 A k 1. 210 24 x 12 A k 1. 230 30 x 10 A k 1.
PAGE 85
Engineering Data C Series Curved-Blade Diffusers Selection Procedure C Series Curved-Blade Diffusers (Page 17-21) One-Way, Two-Way L L 1. Determine the diffuser air pattern best suited to the duct layout and room area to be served. L Engineering Data F ac e V elo c it y P r essu r e L o ss 2. Select the air pattern type and CFM per C F M 6x 6 A k . 090 T h ro w outlet. The tables give the recommended limits C F M 8x 6 of air volume per outlet for various ceiling A k .
PAGE 86
Engineering Data L S C Series Three-Way L L S S S S L S S S C Series Four-Way L L F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S F M /S L /S 40 0 50 0 6 0 0 .0 1 0 .0 1 6 .0 2 2 35 45 55 9/13 11/17 15/20 2. 0/2. 0 2. 5/3. 0 3. 0/3. 5 40 50 60 18/11 24/13 28/16 2. 5/2. 0 3. 0/2. 5 3. 5/3.
PAGE 87
Engineering Data RH45, RHD45, RHF45 Registers and Grilles (Page 25) Engineering Data Face Velocity 6x6 CFM Ps Ak .110 CFM 8x8 Ps Ak .240 CFM 12 x 6 Ps Ak .280 CFM 14 x 6 Ps Ak .330 CFM 14 x 8 Ps Ak .460 CFM 12 x 12 Ps Ak .610 CFM 24 x 8 Ps Ak .840 CFM 18 x 12 Ps Ak .950 CFM 30 x 8 Ps Ak 1.070 CFM 24 x 12 Ps Ak 1.290 CFM 18 x 18 Ps Ak 1.460 CFM 30 x 12 Ps Ak 1.630 CFM 20 x 20 Ps Ak 1.820 CFM 36 x 12 Ps Ak 1.980 CFM 24 x 20 Ps Ak 2.210 CFM 30 x 18 Ps Ak 2.500 CFM 24 x 24 Ps Ak 2.670 CFM 36 x 18 Ps Ak 3.
PAGE 88
Engineering Data RE5 Series Return Air Registers and Grilles (Page 23) RH90 Registers and Grilles (Page 26) 400 50 .012 103 .011 119 .011 141 .011 195 .011 256 .011 348 .010 395 .010 441 .010 535 .010 605 .010 676 .010 755 .010 818 .010 914 .010 1034 .010 1106 .009 1252 .009 1399 .009 1697 .009 1773 .009 2154 .009 2308 .009 2621 .009 3588 .009 4946 .008 500 63 .019 129 .018 148 .018 177 .018 244 .018 320 .017 435 .017 493 .016 552 .016 668 .016 756 .016 845 .016 943 .016 1023 .015 1142 .015 1292 .
PAGE 89
Engineering Data TG, TGF Transfer Grilles (Page 27) Engineering Data F ac e V el o c ity * 5 0 0 6 0 0 7 0 0 8 0 0 90 0 10 0 0 12 0 0 14 0 0 16 0 0 18 0 0 2 0 0 0 2 2 0 0 2 4 0 0 2 6 0 0 10X 6 A k 0. 29 C F M Ps 145 0. 2 174 0. 3 203 0. 4 232 0. 5 261 0. 7 290 0. 8 348 1. 1 406 1. 3 464 1. 6 522 1. 8 580 2. 1 638 2. 3 696 2. 6 754 2. 9 8X 8 A k 0. 3 C F M Ps 150 0. 1 180 0. 3 210 0. 4 240 0. 5 270 0. 6 300 0. 8 360 1 420 1. 3 480 1. 5 540 1. 7 600 2 660 2.
PAGE 90
Engineering Data AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Four-Way Square 500 .020 50 2-3/2-3 110 2-4/2-4 200 3-5/3-5 310 4-6/4-6 450 4-8/4-8 615 5-9/5-9 800 5-11/5-11 1010 6-12/6-12 1370 7-13/7-13 600 700 800 900 1000 1200 1400 .020 .030 .040 .050 .060 .090 .
PAGE 91
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Three-Way Style 3 Engineering Data Face Velocity Pressure Loss CFM 6x6 Ak .100 Throw X/Y CFM 9x9 Ak .220 Throw X/Y CFM 12 x 12 Ak .400 Throw X/Y CFM 15 x 15 Ak .620 Throw X/Y CFM 18 x 18 Ak .900 Throw X/Y CFM 21 x 21 Ak 1.230 Throw X/Y CFM 24 x 24 Ak 1.600 Throw X/Y CFM 27 x 27 Ak 2.020 Throw X/Y 500 .020 50 2-4/1-2 110 2-4/2-3 200 4-7/2-5 310 4-8/2-4 450 4-9/3-5 615 5-11/3-6 800 7-14/5-9 1010 7-13/4-9 600 .
PAGE 92
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Two-Way Corner Style 2C 900 .050 80 3-7/3-7 175 6-10/6-10 315 8-13/8-13 495 10-16/10-16 700 12-19/12-19 975 15-23/15-23 1270 17-27/17-27 1585 19-29/19-29 1000 .060 90 5-8/5-8 195 6-11/6-11 350 9-14/9-14 550 11-18/11-18 780 14-22/14-22 1080 17-28/17-28 1410 19-29/19-29 1760 21-33/21-33 1200 .
PAGE 93
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Two-Way Style 2L Engineering Data Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw Y CFM 12 x 6 Ak .170 Throw Y CFM 15 x 6 Ak .220 Throw Y CFM 12 x 9 Ak .260 Throw Y CFM 15 x 9 Ak .320 Throw Y CFM 18 x 9 Ak .390 Throw Y CFM 21 x 9 Ak .450 Throw Y CFM 15 x 12 Ak .430 Throw Y CFM 18 x 12 Ak .520 Throw Y CFM 21 x 15 Ak .760 Throw Y CFM 24 x 15 Ak .870 Throw Y CFM 21 x 18 Ak .910 Throw Y CFM 27 x 21 Ak 1.
PAGE 94
T Engineering Data T SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) T Two-Way Style 2 500 .020 45 3-5 95 5-7 175 4-7 275 8-12 390 9-15 540 11-17 705 12-19 880 12-20 600 .020 55 3-5 115 6-8 210 6-9 330 10-14 470 11-17 650 14-20 845 14-22 1055 15-23 700 .030 60 4-7 135 6-8 245 9-13 385 10-15 545 12-18 760 15-23 990 17-25 1230 18-26 800 .040 70 4-7 155 6-9 280 10-15 440 12-18 625 14-20 865 18-26 1130 20-30 1410 21-31 900 .
PAGE 95
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) One-Way Style 1L Engineering Data Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw CFM 12 x 6 Ak .170 Throw CFM 15 x 6 Ak .220 Throw CFM 12 x 9 Ak .260 Throw CFM 15 x 9 Ak .320 Throw CFM 18 x 9 Ak .390 Throw CFM 15 x 12 Ak .430 Throw CFM 18 x 12 Ak .520 Throw CFM 21 x 15 Ak .760 Throw CFM 24 x 15 Ak .870 Throw CFM 21 x 18 Ak .910 Throw CFM 27 x 21 Ak 1.380 Throw 500 .
PAGE 96
Engineering Data ASR Square Supply Return Diffuser — Aluminum (Page 35) Four-Way Square Face Velocity Pressure Loss 600 .020 700 .030 90 .01 2-4/2-4 <30 105 .02 2-4/2-4 <30 120 .02 3-5/3-5 <30 CFM 9x9 Grid Core -Ps NC Ak .340 65 <.01 <30 80 <.01 <30 90 <.01 <30 Face Velocity Pressure Loss 500 .020 600 .020 700 .030 200 .01 3-5/3-5 <30 240 .02 4-6/4-6 <30 280 .02 4-8/4-8 <30 150 .01 <30 180 .02 <30 210 .02 <30 500 .020 600 .020 700 .030 250 .01 3-5/3-5 <30 300 .02 4-6/4-6 <30 350 .
PAGE 97
Face Velocity Pressure Loss 500 .020 600 .020 Engineering Data CFM Ps Throw X/Y NC 24 x 24 Ak .700 CFM 18 x 18 Grid Core -Ps Ak 1.600 NC ASR Square 350 .01 3-5/3-5 <30 Supply 260 <.01 <30 Return 420 .02 3-7/3-7 <30 315 <.01 <30 Diffuser 700 .030 800 900 1000 .040 .050 .060 Supply Performance Data 490 560 630 700 .02 .03 .04 .05 4-7/4-7 4-9/4-9 5-11/5-11 5-11/5-11 <30 <30 <30 <30 Return Performance Data 365 420 470 525 <.01 <.01 <.01 <.01 <30 <30 <30 — Aluminum (Page 35)<30 1200 .090 1400 .
PAGE 98
Engineering Data TY TX TX MCD Modular Ceiling Diffuser — Aluminum (Page 36, 37, 71) TY Two Way 500 .020 45 2-5/2-5 <20 80 3-6/3-6 <20 130 3-8/3-8 <20 190 5-9/5-9 <20 260 5-11/5-11 <20 350 6-12/6-12 <20 450 6-14/6-14 <20 555 8-15/8-15 <20 665 8-17/8-17 <20 600 700 800 .020 .030 .
PAGE 99
NC CFM Throw NC CFM 16 x 16 Throw Ak .700 NC CFM 18 x 18 Throw Ak .900 NC CFM 20 x 20 Throw Ak 1.100 NC CFM 22 x 22 Throw Ak 1.330 NC 14 x 14 Ak .
PAGE 100
Engineering Data SS Spiral Diffuser (Page 39) See notes on next page and see page 39 for min. duct diameter. 1/2” wide slot–nonducted ½" wide slot - nonducted 7 10 13 17 20 1-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .002 7-4-2 <15 .003 11-6-4 <15 .006 15-7-5 <15 .009 19-9-6 <15 .016 22-11-7 <15 10 17 23 30 37 43 2-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .001 6-3-2 <15 .002 9-5-3 <15 .
PAGE 101
Engineering Data SS Spiral Diffuser (Page 39) Notes: 1. Tests conducted in accordance with ANSI/ASHRAE 70-1991 at isothermal conditions. Engineering Data 2. Engineering Units: Airflow Rate = CFM/linear foot Static Pressure = in. w.c. Throw = ft. at 50, 100, and 150 FPM terminal velocity 3. Noice Criteria is based on 10 dB room absorption (Re: 1012 watts) evaluated at 125 through 4000 Hz octave bands. 4. Throw data are based on a horizontal discharge in one direction only.
PAGE 102
Engineering Data SV and SVH Spiral Diffusers USV, USVH Universal Spiral Diffusers (Page 38-39) See page 39 for min. duct diameter. 600 .066 84 10-6 108 11-8 126 12-8 150 13-9 234 17-11 312 19-13 20 378 21-14 20 396 22-15 21 426 23-15 21 528 25-17 22 588 26-18 23 666 28-19 23 810 31-21 24 894 32-22 24 1092 36-25 25 1374 41-28 26 1650 44-30 27 700 .
PAGE 103
Engineering Data L Series (Page 40-42) Engineering Data NOTES: 1. Table 1 based on up to 4-foot grille length. For longer lengths, correct throw and NC per Table 2. 2. When using continuous grille lengths with alternate active and inactive sections, a reduction in throw can be obtained by omitting the factors contained in Table 2. 3. Bar style 30 and 0 Increase Table 1 NC + 5 NC cal down-throw at varying supply temperatures is shown in Table 4. 5.
PAGE 104
Engineering Data L Series (Page 40-42) Table 2 - Continuous Grille Length Factors Table 5 - Supply Grille Areas (per foot of length) Modify Table 1 by listed values for grille lengths above 4 feet. Grille Length in Feet NC +0 +5 +10 An 2 .17 2½ .21 3 .25 4 .33 5 .42 Listed Width in Inches 6 8 10 12 14 16 18 20 24 30 36 .50 .67 .84 1.00 1.20 1.30 1.50 1.70 2.00 2.50 3.00 Ak .04 .06 .09 .11 .16 .20 00 and 15 Bar Styles .25 .35 .45 .55 .68 .79 .90 1.00 1.30 1.60 2.10 Ak .03 .05 .08 .
PAGE 105
Throw (T) in Feet CFM/Ft of total Slot length Number of Slots Min. P s Outlet Velocity (V k ) FPM Ceiling Sidewall Sill Minimum Ceiling Height in Feet Min.-Max. Min.-Max. Min.-Max. @ -18F T @ -25F T NC in H 2 O 1 .02 500 5-7 3-5 1-2 <20 7½ 9 2 <.01 335 4-6 2-4 1-2 <20 1 .08 1000 10-13 8-11 1-3 20 20 2 .02 670 8-11 6-9 2-3 8 9 <20 3 .01 400 6-9 4-7 1-2 <20 1 .08 1500 11-16 10-14 4-6 25 2 .05 1000 10-14 8-12 3-4 20 30 9 10 3 .02 600 8-11 6-9 2-3 <20 4 .
PAGE 106
180 200 10 8 9 10 9 10 .05 .10 .08 .07 .10 .08 940 1280 1200 1060 1335 1175 Engineering Data 19-28 24-35 23-34 22-32 25-39 24-37 17-25 21-31 20-30 19-29 22-35 21-33 8-17 12-22 11-21 10-20 - 12 15 12 15 20 30 25 25 30 25 S Series (Page 43-47) 500 600 700 .02 .02 .03 Outlet Velocity (Vk ) FPM 800 900 1000 1200 1400 1600 18 Total Pressure (P t ) inches H2 O .04 .05 .06 .09 .12 .
PAGE 107
180 6 7 8 9 10 6 7 8 9 10 8 9 (Page 10 .09 .07 .05 .04 .03 .11 .08 .06 .05 .04 .10 .07 43-47) .
PAGE 108
Engineering Data S Series (Page 43-47) Type 50 Supply Diffuser Areas per Foot of Length Ak Area An Area 1 .02 .08 2 .03 .17 3 .05 .25 4 .07 .33 No. of Slots 5 6 .09 .10 .42 .50 7 .12 .58 8 .14 .67 9 .15 .75 10 .17 .84 8 .19 .96 9 .21 1.10 10 .23 1.20 8 .24 1.33 9 .27 1.50 10 .30 1.67 Type 75 Supply Diffuser Areas per Foot of Length Ak Area An Area 1 .03 .12 2 .05 .24 3 .07 .36 4 .09 .48 No. of Slots 5 6 .12 .14 .60 .72 7 .16 .84 Engineering Data NOTES: 1.
PAGE 109
Engineering Data DL Drum Louver (Page 48) 6-Inch Outlet* Velocity 800 1000 Static Pressure .007 .010 (Ft2) Total Pressure .039 .065 CFM 128 160 .375 .16 6x9 Throw 6-7-13 8-11-14 CFM 168 210 .500 .21 6 x 12 Throw 8-10-18 10-15-24 CFM 256 320 .750 .32 6 x 18 2100 Throw 10-14-23 13-18-30 .052 CFM 328 410 1.000 .41 6 x 24 .330 Throw 12-17-28 16-21-35 336 CFM 416 520 6 x 30 .52 1.250 17-23-35 Throw 15-20-33 18-24-39 441 CFM 496 620 6 x 36 .62 1.500 18-23-41 Throw 17-23-37 20-26-43 672 CFM 664 830 2.000 6 x 48 .
PAGE 110
1800 .040 .254 1080 2-64 1350 6-73 1620 0-81 1890 4-89 2160 9-96 2700 -100 3330 -118 3870 -135 DL Drum Louver (Page 48) 12-Inch Outlet* Velocity 800 1000 Static Pressure .007 .010 (Ft2) Total Pressure .039 .065 CFM 560 700 12 x 20 .70 1.670 Throw 10-20-35 18-25-43 CFM 840 1050 12 x 30 1.05 2.500 Throw 17-25-42 24-32-53 CFM 1120 1400 12 x 40 1.40 3.330 2100 Throw 20-28-49 27-36-62 .052 CFM 1400 1750 12 x 50 1.75 4.160 .330 Throw 22-29-56 29-39-71 336 CFM 1720 2150 12 x 60 2.15 5.
PAGE 111
Engineering Data Stationary Louvers 245ZC, 245ZF (Page 51) 1530ZC, 1530ZF (Page 50) 36 1.19 36 1.96 1.19 2.72 1.96 3.48 2.72 4.24 5.00 3.48 5.77 4.24 6.53 5.00 7.29 5.77 8.05 6.53 8.81 7.29 9.58 8.05 36 10.34 8.81 1.19 11.10 9.58 1.96 10.34 2.72 11.10 3.48 4.24 5.00 5.77 6.53 36 7.29 0.96 8.05 1.61 8.81 36 2.26 9.58 0.96 2.92 10.34 1.61 11.10 3.57 2.26 4.22 2.92 4.87 3.57 5.52 4.22 6.17 4.87 6.82 5.52 7.47 6.17 36 8.12 6.82 0.96 8.78 7.47 1.61 9.43 8.12 2.26 8.78 2.92 9.43 3.57 4.22 4.87 5.52 6.17 36 6.
PAGE 112
Engineering Data 4-Way Rezzin TBar Diffuser (Page 60) 6" 10" 12" 14" 500 98 .005 .024 175 .014 .030 273 .014 .029 393 .022 .038 535 .023 .037 - 600 118 .006 .034 209 .021 .043 327 .021 .042 471 .032 .054 641 .033 .053 - Neck Velocity FPM 700 800 900 1000 1200 1400 1600 137 157 177 196 236 275 314 .008 .011 .013 .016 .023 .031 .041 .046 .060 .076 .094 .134 .183 .238 15 22 26 31 244 279 314 349 419 489 559 .028 .037 .046 .057 .082 .111 .145 .058 .076 .096 .118 .170 .231 .
PAGE 113
Engineering Data Rezzin Modular Core Tbar Diffuser (Page 60) Engineering Data Throw Data - Terminal Velocity of 75 FPM S 400 79 3.5 4.5 0.9 1.2 0.6 500 98 4.4 5.6 1.1 1.5 0.8 600 118 5.3 6.8 1.3 1.8 0.9 700 137 6.2 7.9 1.5 2.1 1.1 800 157 7.1 9.0 1.7 2.5 1.2 900 1000 1200 1400 1600 177 196 236 275 314 7.9 8.8 10.6 12.4 14.1 10.2 11.3 13.6 15.8 18.1 2.0 2.2 2.6 3.0 3.5 2.8 3.1 3.7 4.3 4.9 1.4 1.5 1.8 2.1 2.
PAGE 114
Engineering Data Rezzin Square Ceiling Diffuser (Page 61) Rezzin Square (two-way corner) 300 60 0.002 2.5 2.5 1.5 82 0.009 4.0 3.5 2.5 105 0.016 5.0 4.5 3.0 CFM Ps Throw Throw Throw CFM Ps Throw Throw Throw CFM Ps Throw Throw Throw 400 80 0.004 3.5 3.0 2.0 109 0.016 5.0 4.5 3.0 140 0.029 6.5 6.0 4.0 500 100 0.006 4.0 4.0 2.5 136 0.025 6.0 5.5 4.0 175 0.045 8.0 7.5 5.0 600 120 0.008 5.0 4.5 3.0 164 0.037 7.5 7.0 4.5 209 0.065 9.5 9.0 6.0 700 135 0.011 6.0 5.5 3.5 191 0.050 8.5 8.0 5.5 244 0.088 11.0 10.
PAGE 115
Engineering Data Engineering Data 659T/659TI/PFT/PFTI Series Performance (Page 53, 56) Average Face Velocity 659T CFM Ak 2.440 -Ps PFT CFM Ak 2.740 -Ps 659-TI w/12" collar CFM Ak 2.230 -Ps w/14" collar CFM Ak 2.260 -Ps w/16" collar CFM Ak 2.320 -Ps PFTI w/12" collar CFM Ak 2.320 -Ps w/14" collar CFM Ak 2.590 -Ps w/16" collar CFM Ak 2.630 -Ps 300 400 500 600 730 975 1220 1465 .017 .030 .047 .067 820 1095 1370 1645 .028 .050 .078 .113 670 .084 680 .060 695 .039 Neck Velocity CFM 6" Diameter Ps NC Ak .
PAGE 116
Engineering Data RENPS, ARENPS, PDS (Page 65, 68) REN4 (Page 59) Neck Velocity 650 130 .020 26 11.0 225 .027 35 13.0 355 .040 35 15.0 510 .061 36 15.0 695 .094 35 16.0 Note: The use of a balancing hood is recommended to balance the system. -12 NC is based on 10dB room attenuation (Re: 10 watts) ASHRAE 36-72. HVS,Terminal HVSVelocity R6, ofFPD, FPD3 (Page 62-63) 75 FPM An = Neck Area in Sq. Ft. Neck Velocity CFM 6" Ps An .200 NC Ak .780 Throw CFM 8" Ps An .350 NC Ak .920 Throw CFM 10" Ps An .
PAGE 117
Engineering Data Probe Position: The probe is held 1 inch in from the outer edge of the diffuser, flush with the face. Engineering Data PROBE POSITION 1 2 3 4 Four-Way (Short Throw) • For throw in all four directions, use short throw data. Three-Way (Short Throw) • For throw in all three directions, use short throw data. 1 2 3 4 Three-Way (Long & Short) • For throw in the #2 & #4 direction use long throw data. 1 2 3 4 • For throw in the #1 & #3 directions, use short throw data.
PAGE 118
Engineering Data CBPS Supply (Page 66) One-Way Supply 300 60 .060 2.5-4.0-5.0 <20 105 .080 4.0-6.0-7.0 <20 165 .080 4.5-7.0-8.5 <20 235 .080 5.5-8.5-10.0 <20 325 .110 4.5-7.0-8.5 <20 420 .020 5.0-8.0-10.0 <20 400 80 .080 3.5-5.0-6.0 <20 140 .110 5.5-8.0-9.5 <20 220 .110 6.5-9.5-11.5 <20 315 .110 7.5-11.0-13.5 20 430 .140 6.5-9.5-11.5 20 560 .040 7.0-10.0-12.0 <20 500 100 .100 4.0-6.0-7.0 <20 175 .160 6.5-10.0-12.0 21 275 .170 8.0-12.0-14.5 23 395 .170 9.5-14.0-17.0 25 535 .210 8.0-12.0-14.5 25 700 .
PAGE 119
Ps 10" Throw NC CFM Ps 12" Throw NC CFM Ps 14" Throw NC CFM Ps 16' Throw CBPSNCSupply .030 .040 4.5-6.5-8.0 5.5-8.5-10.5 <20 <20 235 315 .020 .030 4.5-6.5-8.0 5.5-8.5-10.0 <20 <20 325 430 .020 .030 4.0-5.0-7.0 5.5-8.0-9.5 <20 <20 420 560 .020 .040 5.0-6.0-8.0 6.0-9.0-10.0 <20 (Page<20 66) .060 7.0-10.5-12.5 <20 395 .050 7.0-10.5-12.5 21 535 .050 6.0-9.0-11.0 20 700 .060 7.0-9.0-12.0 26 Engineering Data .090 8.5-12.5-15.0 21 470 .070 8.5-12.5-15.0 27 640 .070 8.0-12.0-14.5 25 840 .080 9.0-13.0-15.0 34 .
PAGE 120
Engineering Data Screw Hole Location Chart 92 Series, 94 Series, 98 Series 821, 831 Engineering Data 117
PAGE 121
Engineering Data Engineering Data Screw Hole Chart for Extruded Aluminum Line V Series, H Series, C Series, RH Series 118
PAGE 122
Engineering Data 821, 831, 92 Series, 98VOH, H and V Series Drop Chart, Use with size selection charts Instructions for use of Drop Chart Engineering Data The drop of the air stream is determined by using the throw and velocity of the register selected. On the drop chart, lay a straight edge connecting these values. The total drop of the air stream will be the sum of the drop due to temperature (Dt) and the drop due to spread (Ds).
PAGE 123
Engineering Data 92 Series, H and V Series Alternate Sizing Graph Grille Width in Inches Method of Determining Alternate Grille Sizes Engineering Data Extensive tests indicate that by varying dimensions of a grille there is no appreciable effect on the air throw, provided the same area is maintained. To change the dimensions of a grille, place a straight edge across the width and height scales on dimensions as selected from charts.
PAGE 124
Suggested Specifications Surfaire® T-Bar Diffusers Back panel shall be formed galvanized steel covered with glass fiber insulation and an aluminum foil vapor barrier. Insulation is held securely in place by face margin edge fold over. Insulation will be prescored to accept specified collar sizes. 5400 Series collars will be supplied providing efficient, tight attachment with bayonet fasteners to mating prepunched holes in back panel. Collars will provide flex duct locking tabs and damper mounting slots.
PAGE 125
Glossary of Terms Ceiling or Wall Effect The tendency of an air stream moving along a wall or ceiling surface to remain in contact with that surface. Glossary of Terms Engineering Data Core Area The total plane area of that portion of a grille, face, or register bounded by a line tangent to the outer opening through which air can pass. The core area is less than the register size. Example, a 14-in. x 8-in. register may have a core that is 1 in. less than the listed size; so, the core area is 13in. x 7in.
PAGE 126
Alpha-Numeric Index Engineering Data Steel—Panel Extruded Aluminum Face.............................................................72 Damper...............................................................................................................75 Aluminum - Detachable Plate Diffuser Fixed Collar...........................................64....................... 115 Square Two-Core Face Fixed Collar with molded R6 Insulation Option............62....................... 115 Aluminum Plaster Frame....
PAGE 127
Alpha-Numeric Index Alpha-Numeric Index Product Information MFB P Panel PD PDF PDR PDS PDSD PFT PFTI PFG RCB/RCBD RCBF RCBFT RCBT RD RE5 RE5T RE5TI RED5 REF5 REF5T REF5TI REN4 RENP RENPS RFPR RFPS RH45 RH45T RH90 RHD90 RHF45 RHD45 RHF45T RZ-Round RZ-Square Back Panel Mod Core Egg Crate Sq to Rd 4-Way Tbar S SBP SCBPS SMF SR SR/AR SR6 SR7 SRT SR/AR SRET/SRET R6 SRE 124 Engineering Data Molded Fiberglass Back Features......................................................................54 Filler Panel....
PAGE 128
Alpha-Numeric Index Product Information Directional, Step Frame......................................................................................30......................... 89 Linear Face Diffuser............................................................................................39......................... 99 Single-Deflection Diffuser...................................................................................38....................... 101 Double-Deflection Diffuser.......................
PAGE 129
hartandcooley.com Hart & Cooley Inc 5030 Corporate Exchange Blvd. SE Grand Rapids, MI 49512 P (800) 433-6341 F (800) 223-8461 hartandcooley.com CHECK OUT OUR WEBSITE! HARTANDCOOLEY.
PAGE 130
PAGE 131
PAGE 132
install confidence. Hart & Cooley 5030 Corporate Exchange Blvd. SE Grand Rapids, MI 49512 P (800) 433-6341 F (800) 223-8461 hartandcooley.com Offered by, Form No. 851531 03/2016 2016 Hart & Cooley is a registered trademark of Johnson Controls, Inc. in the United States and other countries.