Brochure

ManualsBrandsHart & Cooley ManualsCommercial Horizontal Faced Registers18" x 10" (Wall Opening Size) White Supply Register (92HVV Series)

install confidence.

Commercial

Grilles, Registers & Diffusers

Edition 12

Summary of content (142 pages)

PAGE 1
install confidence.
PAGE 2
(800) 433-6341 hartandcooleyinc.com Contact your customer service representative or territory sales manager for pricing and availability. Thousands of HVAC products ready to ship. Residential Vent & Chimney Vent: Standard efficiency b-vent, high efficiency polypropylene, special gas vent for condensing, near-condensing, and non-condensing vent systems. Stock residential diameters and system components available in 3" – 14". Additional sizes available up to 30". Direct vent systems also available.
PAGE 3
LIGHT COMMERCIAL Product Information Engineering Data REGISTERS & GRILLES—STEEL 811-814 (800 Series) Curved Blade Steel, One-Way Through Four-Way..........................5........................ NA 821 Vertical Single Deflection, w/MS...........................................................................6.................... 77-78 831 Horizontal Single Deflection, w/MS......................................................................6....................
PAGE 4
Table of Contents Table of Contents LIGHT COMMERCIAL Product Information Engineering Data CEILING DIFFUSERS—STEEL 19 Round OB Damper.............................................................................................28........................ NA 20 Round Adjustable...............................................................................................28......................... 99 21 Steel Square Mounting Frame...........................................................................29.
PAGE 5
T-BAR GRILLES & DIFFUSERS Product Information Engineering Data T-BAR RETURN AIR FILTER GRILLES T-Bar Construction Features...............................................................................51 659T Steel—Lanced Face...........................................................................................52....................... 126 659TI Steel—Lanced Face with Fiberglass Back........................................................52....................... 126 673T Steel—Filter Grille........
PAGE 6
Table of Contents Table of Contents T-BAR GRILLES & DIFFUSERS Product Information SBP PDS PDSD PDR PD Engineering Data Steel—Perforated Face Shallow Back...............................................................65....................... 128 Steel—Perforated Face with Fixed Deflector.....................................................66....................... 127 Steel—Perforated Face with Adjustable Deflector.............................................66.......................
PAGE 7
Registers & Grilles - Steel Registers & Grilles - Steel 800 Series • • • • • • • • Steel construction Curved Blade design 1 - 4-way or 2-way corner air diffusion Available with or without damper Damper options: Multi-Shutter or Opposed Blade Individually adjustable bars for easy positive setting Opposed Blade damper is screwdriver operated Bright White finish 800 Series Available Sizes (in.
PAGE 8
Registers & Grilles - Steel Registers & Grilles - Steel 821 • • • • All-steel construction Vertical adjustable face bars Horizontal multi-shutter valve Bright White finish HT 4 5 6 8 10 12 14 16 18 20 24 HT 831 • • • • • • All-steel construction Horizontal adjustable face bars Vertical valve Adjustable multi-shutter valve Bright White finish 3/4” fin spacing Note: 6 6 X 8 X X X X 821 Available Sizes (in.
PAGE 9
X X X X X X X 92HVO Register • • • • • X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Registers & Grilles - Steel Registers & Grilles - Steel 5 6 8 10 12 14 16 18 20 24 X All-steel construction 831 Available Sizes (in.) WIDTH Adjustable face HT bars may be set to any desired deflection 8 10 12 14 16 20 24 30 32 36 Horizontal front bars 821 Available Sizes (in.
PAGE 10
HT 6 8 10 12 1492HVV 16 Available 18 20 22 24(in.
PAGE 11
Registers & Grilles - Steel 94HOV Register • • • • • • HT 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 6 X X X 8 X X X X 10 X X X X X 12 X X X X X X 94HOV Available Sizes (in.
PAGE 12
94A Available Sizes (in.) 94A Available Sizes (in.
PAGE 13
92OOV Damper Registers & Grilles - Steel Registers & Grilles - Steel 9200V Available Sizes (in.) Minimum: 6” x 4” • Steel construction Maximum: 24” x 24” One Piece • Opposed-blade damper • Controls the air volume from full flow to shut-off • Mill finish • For use with: - 92 - 94 - RE5 - PFG PFG Perforated Face Grille • • • • • PFG Available Sizes (in.
PAGE 14
Registers & Grilles - Aluminum Registers & Grilles - Aluminum HX Grille • • • • • Extruded aluminum construction Horizontal front bars Single row of individually adjustable horizontal face bars Pivoted bars for easy positive setting Bright White or Satin Anodized finish HX Available Sizes (in.
PAGE 15
Registers & Grilles - Aluminum HM Register HV Register • • • • • • Note: Screw hole location details start on page 131 Engineering Data on Page 91-92 X X X X X X X X X X X X X X X X 40 X X X X X X X X X X X X X X X X X X X X 13 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 42 X X X X X X X X X X X X X X X X X X X X X 44 X X X X X X X X X X X X X X X X X X X X X X 46 X X X X X X X X X X X X X X X X X X X X X X X Registers & Grilles -
PAGE 16
Registers & Grilles - Aluminum Registers & Grilles - Aluminum HVD Register • • • • • Extruded aluminum construction Two rows of individually adjustable face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized finish HVD Available Sizes (in.
PAGE 17
Registers & Grilles - Aluminum VD Register • • • • • • HT 6 8 4 X X 5 X X 6 X X 8 X 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 22 24 26 10 12 28 X X X 30 X X 32 X X 34 X X 36 X X 38 40 42 44 46 48 HT 16 X X X X X X X X 18 X X X X X X X X X X X X X X X X VD Available Sizes (in.
PAGE 18
Registers & Grilles - Aluminum Registers & Grilles - Aluminum VH Register • • • • • • Extruded aluminum construction Vertical front bars Horizontal second bars Two rows of individually adjustable face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Bright White or Satin Anodized finish VH Available Sizes (in.
PAGE 19
Registers & Grilles - Aluminum CH 1 Grille • • • X X X X X X X X X X X X X X 38 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 40 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X CHD1 Register • • • CHM1 Register • • • Note: Screw hole location details start on page 131 Engineering Data on Page 93-94 17 X X X X X X X X X X X X X X X 42 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
PAGE 20
Registers & Grilles - Aluminum Registers & Grilles - Aluminum CH2 Grille • Extruded aluminum construction • Two-way deflection • Individually adjustable curved-face bars CH2 Available Sizes (in.) WIDTH 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 6 X X X X X X X X X X X X X X X X 8 X X X X X X X X X X X X X X X 10 X X CH2 X Available X X X Sizes X X (in.
PAGE 21
8 X8 XX X Registers & Grilles - Aluminum C3 Grille • • • • • Bright White or Satin Anodized finish HT 6 8 6 X X HT 8 6 X8 106 X X X 128 10 14 12 16 14 18 16 20 18 22 20 24 22 26 24 28 26 30 28 32 30 34 32 36 34 36 HT 6 X 6 X 6 HT 8 106 128 10 14 12 16 14 18 16 20 18 Extruded aluminum construction 22 20 24 Three-way deflection 22 26 24bars Individually adjustable curved-face28 26 30 Pivoted bars for easy positive setting 28 32 30 Opposed-blade damper 34 32 36 Bright White or Satin Anodized finish 34 3
PAGE 22
14 16 18 20 22 24 26 28 30 32 34 36 Registers & Grilles - Aluminum Registers & Grilles - Aluminum CM3 Register • Extruded aluminum construction • Three-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Multi-shutter valve • Bright White or Satin Anodized finish C4 Grille • Extruded aluminum construction • Four-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish HT
PAGE 23
CD4 Register • Extruded aluminum construction • Four-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized finish CM4 Register • Extruded aluminum construction • Four-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Multi-shutter valve • Bright White or Satin Anodized finish Note: Screw hole location details start on page 131 Engineering Data on Page 93
PAGE 24
Registers & Grilles - Aluminum Registers & Grilles - Aluminum RCB Grille RCBD Register • • • • Extruded aluminum construction Curved blades fixed on one-inch spacing Opposed-blade damper Bright White or Satin Anodized finish HT Blades at 40° angle • • • • • • Blades at 40° angle 22 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X RCB, RCBD Available Sizes (in.
PAGE 25
Registers & Grilles - Aluminum RE5 Grille • • • • X X X X X X X X X X Registers & Grilles - Aluminum 24 6 X X X X X X X X X XX X XX XX XX XX XX XX XX XX XX XX XX 26 8 X X X X X X X X X X XX XX XX XX XX XX XX XX XX XX XX 28 10 X X X X X X X X XX XX XX XX XX XX XX XX XX XX XX 30 12 X X X X X X X X XX XX XX XX XX XX XX XX XX XX 32 14 X X X X X X X X X XX XX XX XX XX XX XX XX XX 34 16 X X X X X X X X X XX XX XX XX XX XX XX XX 36 18 X X X X X X X X XX XX XX XX XX XX XX 38 20 X X X X X X X X X X XX XX XX XX XX
PAGE 26
Registers & Grilles - Aluminum Registers & Grilles - Aluminum REF5 Filter Grille, Grid Core • • • • • • All-aluminum construction 1/2” x 1/2” x 1/2” square core design Accommodates standard 1” thick disposable filter (not included) Filter grilles equipped with quarter turn fasteners Bright White or Mill finish Specify REF52 for 2” filter HT 6 8 10 12 4 X X X X 5 X X X X 6 X X X X 8 X X X 10 X X 12 X 14 16 18 20 22 24 25 26 28 30 32 34 36 HT REF5 Available Sizes (in.
PAGE 27
REF5 Available Sizes (in.) WIDTH 6 8 10 12 14 16 18 20 22 24 25 26 28 30 32 34 36 4 X X X X X X X X X X X X X X X X 5 X X X X X X X X X X X X X X X X 6 X X X X X X X X Available X X SizesX (in.
PAGE 28
Registers & Grilles - Aluminum Registers & Grilles - Aluminum RH90 Grille • Extruded aluminum construction • Face bars permanently fixed into heavy aluminum frames at a 90-degree angle from face • Bright White or Satin Anodized finish HT 40 42 44 46 48 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X RH90 Available Sizes (in.
PAGE 29
TG Transfer Grille • • • • • 14 16 18 20 22 24 26 28 30 32 34 36 • Extruded aluminum construction 38 40 42 44 46 48 TGF Transfer Grille Frame HT Note: When framing both sides of the door or partition opening, use the TGF frame with the TG Grille. Adjustable from 11/4" to 21/4" door thickness. RH90 Available Sizes (in.
PAGE 30
Ceiling Diffusers - Steel Ceiling Diffusers - Steel 19 Damper • • • • Steel construction Opposed-blade damper Bright White finish Duct-mount only 19 Damper Listed Sizes (in.
PAGE 31
21 Installation Frame • All-steel construction • Golden Sand enamel finish • Used but not furnished with #24 ceiling diffusers. Ceiling Diffusers - Steel Ceiling Diffusers - Steel 21 Available Sizes (in.) 6, 8, 10, 12, 14, 16, 18, 20, 22, 24 23 Available Sizes (in.) 6, 8, 10, 12, 14, 16, 18, 20, 22, 24 2 Siz 6 8 10 12 14 Not required when using 22 Butterfly Damper or 23 Opposed Blade Damper. Cannot be used with SD or SDD. 21 Available Sizes (in.
PAGE 32
Ceiling Diffusers - Steel Ceiling Diffusers - Steel HT SRE Diffuser • • • • Steel construction Removable core Flat margin style Optional opposed blade damper available for field installation (see SR7 damper) • Bright White enamel finish SR7 Volume Damper • • • • 30 Steel construction Used to control airflow at the diffuser Mill finish Field installed for use with SRE, SRS or SRT diffusers 6 9 12 HT 15 186 219 24 12 15 18 21 HT 24 6 9 12 HT 15 186 219 24 12 SRE Available Sizes (in.
PAGE 33
ARE Diffuser • Extruded aluminum construction • Removable core • Flat margin style • Optional factory-mounted aluminum opposed-blade damper available as ARED • Bright White or Satin Anodized finish See page 33 for available air patterns.
PAGE 34
15 18 21 24 27 30 33 36 Ceiling Diffusers - Aluminum Ceiling Diffusers - Aluminum X ARS Diffuser • Extruded aluminum construction • Removable core • Beveled (step-down) margin style • Optional factory-mounted, aluminum, opposed-blade damper available as ARSD • Bright White or Satin Anodized finish See page 33 for available air patterns.
PAGE 35
Neck View Ceiling Diffusers - Steel/Aluminum Ceiling Diffusers - Steel/Aluminum Type SR & AR Air Patterns Style Listed Sizes 6x6 9x9 12x12 15x15 18x18 21x21 STYLE 4 24 x 24 Max. in Steel 9x6 to 36x6 12x9 to 36x9 15x12 to 36x12 18x15 to 36x15 21x18 to 36x18 STYLE 3 24x21 to 45x21 27x24 to 45x24 30x27 to 45x27 33x30 to 45x30 36x33 to 45x33 24 x 21 Max.
PAGE 36
PAGE 37
MCD Adjustable Modular Diffuser Ceiling Diffusers - Aluminum Ceiling Diffusers - Aluminum MCD Available Sizes (in.) 6” x 6”, 8” x 8”, 10” x 10”, 12” x 12”, 14” x 14”, 16” x 16”, 18” x 18”, 20” x 20”, 22” x 22” • Extruded aluminum construction • Four modular cores provide variable pattern adjustments of four-way, three-way, twoway, or one-way horizontal air patterns • Flat margin • Fixed fins • Bright White finish MCDD Adjustable Modular Diffuser MCDD Available Sizes (in.
PAGE 38
Ceiling Diffusers - Aluminum Ceiling Diffusers - Aluminum MCDSD Adjustable Modular Diffuser MCDSD Available Sizes (in.
PAGE 39
SV Single-Deflection Diffuser (Shown with scoop) Size restrictions apply. See price list for sizes and ordering information.
PAGE 40
Spiral Diffusers Spiral Diffusers USVH Double-Deflection Universal Diffuser Size restrictions apply. See price list for sizes and ordering information. USVH Available Sizes (in.
PAGE 41
LS/LF Series Diffuser Minimum width 1-1/2” Sizes under 4" not available Note: Floor application must be ordered as “LF.” Eight-inch maximum width for constant traffic; 12” maximum width for occasional traffic; maximum length 72”.
PAGE 42
Linear Bar Diffusers Linear Bar Diffusers L Series - Dimensional Data Mounting Style 0 (Floor/Sill) LF Mounting Style 1 (Ceiling) LS Mounting Style 3 Mounting Style 00 (Bars Only) Mounting Style GO 00 Bar Style Only w/o Mounted Damper or Control Grid (Ceiling/Sidewall) LS (Concrete/Tile) LF BAR STYLES Note: Quantity of bars = 2 x listed width minus 2. Example: 4” listed width = 4” x 2 = 8 minus 2 = 6 bars.
PAGE 43
Linear Bar Diffusers Linear Bar Diffusers L Series Single-Leaf Damper Option • Aluminum construction • Leaf type for sizes 11/2” to 3” Note: Order with desired diffuser for attachment at factory. Cannot be used with hanger brackets. L Series G Grid Option • Aluminum construction • Individual adjustable blades • Cannot be used with hanger brackets Note: G Grid blades are assembled parallel to short dimension. Order with desired diffuser for factory fitting. Control grids start at 4" and above.
PAGE 44
Linear Bar Diffusers Linear Bar Diffusers S Series MiterWed Corners Mitered Corner Sections Order as: S 90-degree mitered corners are available as factory-fabricated section. Precise factory cutting and assembly reduces field fabrication time and assures proper fit. Corner sections are furnished and blanked off. Corner sections butt to adjacent straight sections, which are spliced together with aligning keys. Mitered corners are furnished in style #4 (with pattern controller and damper).
PAGE 45
Linear Slot Diffusers Linear Slot Diffusers MARGIN STYLE SLOT S Series Slot Diffusers DIFFUSER ONLY with Hanger Bracket with No.
PAGE 46
44 Linear Slot Diffusers
PAGE 47
STYLE B0 Linear Slot Diffusers Linear Slot Diffusers PLENUM = A + 1/16 Also for T-Bar applications Order 223/4” or 463/4” lengths with End Caps.
PAGE 48
Linear Slot Diffusers Linear Slot Diffusers STYLE E0 STYLE F0 CEILING OPENING = A PLENUM = A - 7/16 Also for T-Bar applications CEILING OPENING = D - 1/4 PLENUM = A - 7/16 For E0, order 22” and 46” lengths with End Caps.
PAGE 49
DL Drum Louver Drum Louver Available Sizes • All-aluminum construction • Horizontal and vertical air stream control • Galvanized, opposedblade damper (optional) • Adjustable drum and vane design • White or Mill finish 6" x 12", 6" x 18", 6" x 24", 6" x 30", 6" x 36", 6" x 48", 6" x 60" 10" x 20", 10" x 25", 10" x 30", 10" x 35", 10" x 40", 10" x 50" 12" x 30", 12" x 40", 12" x 50", 12" x 70" 15" x 30", 15" x 50", 15" x 60", 15" x 70" Louvers Louvers Order H x W Duct Opening Sizing Listed Height Size
PAGE 50
Louvers Louvers BV Brick/Block Vent • Extruded aluminum construction • Standard masonry size • Maximum water protection • 6063-T5 extruded aluminum alloy • 18 x 16 mesh aluminum insect screen standard • 4” standard depth • Satin Anodized finish Note: To order specify Model, Depth, Finish Example: BV168 4 SA DIMENSIONS/FREE AREA BV Model STANDARD BRICK JUMBO BRICK MODULAR BLOCK Masonry Opening Size A B Width Inches Height Inches Free Area Sq. Ft. 802 ONE BRICK 8 2 1/ 2 .
PAGE 51
Louvers Louvers 4ABC Adjustable Louver • • • • • • • • Extruded aluminum construction Adjustable baffle blades on 4” centers 4” louver depth Channel frame Max.
PAGE 52
Louvers Louvers 245ZC Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2” louver depth Channel frame Available with bird screen or insect screen • Mill finish standard 245ZF Shown 245ZF Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2” louver depth Flange frame Available with bird screen or insect screen • Mill finish standard 445ZC Stationary Louver • • • • • • Extrude
PAGE 53
Our popular supply and return products for T-Bar A unique modular collar system provides a standard ceilings are an innovative response to the challenge of collar and damper unit, which can be shared between creating a better indoor environment. T-Bar products a number of different T-Bar products. In addition, combine clean appearance with installation ease, and Hart & Cooley offers specialty T-Bar products to meet include critical design details to ensure consistent specific design demands.
PAGE 54
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 659T Steel Lanced Filter Grille 659T / 659TI Available Sizes 20” x 20” with extended frame (overall 233/4” x 233/4”) for 24” x 24” openings 44” x 20” with extended frame (overall 473/4” x 233/4”) for 48”x24” opening (659T only) • Steel construction • Lanced-face design with 1/3” blade spacing • Flush, removable face with concealed latches and hinges can be installed in any direction • Uses standard 1” disposable filters (not furnished) • Bri
PAGE 55
673TPI R6 Steel Filter Grille T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 673TPI R6 Available Size 20” x 20”, overall 233/4” x 233/4” • Steel construction • Lanced-face design with 1/2” blade spacing • Flush, face with screwdriver latches and piano hinges can be installed in any direction • Plenum box with R6 insulated ductboard • Uses standard 1” disposable filters (not furnished) • Bright White finish Molded Fiberglass Back R4.
PAGE 56
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 96AFBTI Steel Fixed-Bar Filter Grille with Fiberglass Back See page 54 for fiberglass specifications. 96AFBTI Available Size 20” x 20”, overall 233/4” x 233/4” • Steel construction • Bar-style face design • Flush, removable face with concealed latches and hinges, can be installed in any direction • R4.
PAGE 57
REF5T/REF5TI Aluminum Egg Crate Filter Grille • • • • • REF5T/ REF5TI REF5T only T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles Available Sizes 20” x 20” with extended frame (overall 233/4” x 233/4” ) for 24” x 24” openings 44” x 20” with extended frame (overall 473/4” x 233/4”) for 48” x 24” openings Aluminum and steel construction Egg crate style face Non-removable face, hinged to filter frame Mount flush with T-Bar ceilings REF5T with thumb screw fasteners, REF5TI with cam lock • Use
PAGE 58
T-Bar Return-Air Grilles T-Bar Return-Air Grilles 94AT Steel Bar-Style Return Grille 94AT Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 46” x 22” (overall 473/4” x 233/4”) for 48” x 24” openings • Steel construction • Mount flush with T-Bar ceilings • Bright White finish RH45T Aluminum Bar-Style Return Grille RH45T Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 46” x 22” (overall 473/4” x 233/4”) for 48” x 24” openings • Extruded aluminum constr
PAGE 59
RE5T Aluminum Egg Crate Return Grille • • • • T-Bar Return-Air Grilles T-Bar Return-Air Grilles RE5T Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 22” x 46” (overall 473/4” x 233/4”) for 48” x 24” openings All aluminum construction Egg crate style face Mount flush with T-Bar ceilings Bright White or Mill Aluminum finish RE5TI Aluminum Egg Crate Return Grille with Insulated Back RE5TI Available Size grid core face 1/2” x 1/2” x 1/2” • • • • All aluminum construction Egg cr
PAGE 60
T-Bar Surfaire/Renovator Diffusers T-Bar Surfaire/Renovator Diffusers 444 SurfAire® Aluminum Face Renovator Series Diffuser 444 Available Size overall size 233/4” x 233/4” • Aluminum face • Unique deflector apertures • Air distributed in thin layers along ceiling surface allowing optimum mixing of conditioned air • Formed galvanized steel back panel • Frame includes four seismic safety connections • Back plate covered with glass fiber insulation to reduce condensation • Aluminum foil vapor barrier protec
PAGE 61
8 HT 4-Way Rezzin T-Bar Diffuser • Engineered polymer construction • Four-way deflection • Available with Rezzin square-to-round, ordered separately • Bright White finish • Contains metal screws Rezzin T-Bar Modular Core Diffuser • Engineered polymer construction • Modular cores provide one, two, three, or fourway horizontal air patterns • Removable modules provide easy access to accessories • Available with Rezzin back panel, ordered separately • Bright White finish Rezzin Back Panel • • • • Engineered
PAGE 62
Square Size Round Neck 14 x 14 6 14 x 14 8 14 x 14 10 RZ421 Available Sizes (in.) 14 x 14 12 14 x 14 WIDTH 14 HT 10 12 2 X Round Available Size (in.
PAGE 63
HVS/HVS R6 Steel High-Volume Supply • • • • • • • • • • • • • • • • • Engineering Data on Page 127 HVS Available Size Overall Size 233/4” x 233/4” Steel construction Provides high air volume delivery 360-degree air diffusion Formed back panel Fixed core Fiberglass insulation blanket with foil vapor HVS Shown barrier to minimize condensation on HVS Insulation prescored to accommodate collar size desired R6 molded fiberglass back on HVS R6; use 5400 with 5400PP Accepts unique 2” high snap-in collar (5400
PAGE 64
T-Bar Fixed-Pattern/Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers FPD3/FPD3 R6 Steel Fixed-Pattern Diffuser • • • • • • • • • • • FPD3 T-Bar Available Size Overall Size 233/4” x 233/4” Steel construction Provides high air volume delivery 360-degree air diffusion Three cone fixed core Fixed collar 6” to 14” Unique 2” high collar permits easy flex connections Utilizes butterfly damper (3800 Series) inserted in collar–order separately Damper adjustable thru face Formed steel back panel Bright W
PAGE 65
DPD/DPD R6 Steel T-Bar Plate Diffuser T-Bar Fixed-Pattern/Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers DPD/DPD R6 Available Sizes 6” 8” 10” 12” 14” • Aesthetically appealing, singleface plate design • 360° air diffusion pattern • Detachable face plate • 2” fixed collar • Optional R6 insulated back (DPD R6) • White finish ADPD Aluminum T-Bar Plate Diffuser • Aesthetically appealing, single-face plate design • 360° air diffusion pattern • Detachable face plate • 2” fixed collar • Constructed
PAGE 66
T-Bar Fixed-Pattern/Perforated Supply Diffusers T-Bar Fixed-Pattern Perforated Supply Diffusers RENPS/ARENPS RENPS Available Size Overall 233/4” x 233/4” RENPS R6 Steel/Aluminum Perforated Supply Diffuser with Insulated Back • Perforated steel face with deflector • Molded fiberglass back panel, available in R4.
PAGE 67
CBPS/CBPR Steel Curved-Blade Perforated Supply/Return CBPS Curved-Blade Perforated Supply • Steel construction • Removable, hinged face allows for easy access to air pattern control core • Individually adjustable pattern deflectors factory-set at 4-way deflection; can be field-adjusted for 1, 2, 3-way air patterns • Available in 6”, 8”, 10”, 12”, 14” and 16” diameter necks • Unique 2” high collar permits easy flex connections • Accepts 3800 Series butterfly damper (order separately) • For 16”, use T19 • B
PAGE 68
T-Bar Perforated Supply/Return T-Bar Perforated Supply/Return PDS Steel Perforated Supply Diffuser PDS Available Size Overall Size 233/4” x 233/4” PDSD Steel Perforated Diffuser Supply PDSD Available Size Overall Size 233/4” x 233/4” (with fixed deflector) • Perforated steel face • Formed steel, black back panel • Fiberglass insulation blanket with foil vapor barrier to minimize condensation • Insulation prescored to accommodate collar size desired • Accepts unique snap-in collar (5400 Series) 6” to 12
PAGE 69
PDR Steel Perforated Return Grille T-Bar Perforated Supply/Return T-Bar Perforated Supply/Return PDR Available Size Overall Size 233/4” x 233/4” • 51% net free area • Available with 14”, 16”, or 18” fixed collars • Formed steel, black back panel • White finish PD Steel Perforated Return Face Only–No Back • Face only return for plenum ceilings • Available in 24” x 12”, 24” x 24” and 48” x 24” sizes • White finish Engineering Data on Page 128 67
PAGE 70
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser ART ART Available Sizes 6” x 6”, 9” x 9”, 12” x 12”, 15” x 15”, 21” x 21” Aluminum Note: For 18” x 18” neck, order ARE 18” x 18”.
PAGE 71
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser MCDSDT MCDSDT/MCDSDTSR Available Sizes 6” x 6”, 8” x 8”, 10” x 10”, 12” x 12”, 14” x 14”, Aluminum 16” x 16”, 18” x 18”, 20” x 20” Modular Core Diffuser with Damper MCDSDT • Extruded aluminum diffuser in aluminum panel • Modular cores provide one, two, three, and four-way air patterns • Removable modules provide easy access to damper • Aluminum opposed-blade damper • Available in 6” to 20” • Available as MCDSDTSR with square-to-round t
PAGE 72
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser A500 Series Diffusers A501MS/A501OB One-way deflection • • • • • • • • 6"x6" Extruded aluminum construction Cores flush with margin One-way air diffusion Face mount for easy installation For sidewall or ceiling application Multi-shutter or opposed-blade dampers - aluminum Inconspicuous fingertip lever for air volume control Bright white finish A500 Series Available Sizes 8"x8" 10"x10" 12"x12" 14"x14" OB Damper MS Damper A502MS/A5
PAGE 73
6400 Tab Collar 6” • Galvanized steel construction • For use with fiberglassbacked ceiling diffusers • Tabbed for easy installation • Accepts 3800 Series damper 5400 Series Collar Ring* T-Bar Accessories T-Bar Accessories 6400 Series Available Sizes 8” 10” 12” 14” 5400 Series Available Sizes 6” 7” 8” 9” 10” 12” 14”* 16” 18” • Unique snap-in design for easy installation • 2” high collar permits easy flex connections • Bead on collar improves the strength and provides retention for flexible duct connect
PAGE 74
T-Bar Accessories T-Bar Accessories T19 Series Damper • Multi-blade damper • Tabs for easy installation • For use with 5400 Series collar • Bright White finish Note: 3/16 hex operator by 6” 19 Series Available Sizes 8” 10” 12” 14” 16” others RD Radial Damper • Galvanized steel construction • Face-adjustable • For use with round neck diffusers • Mill finish SMF Aluminum Surface Mount Frame 6” RD Available Sizes 8” 10” 12” 14” SMF Available Sizes 12” x 12”, 24” x 12”, 24” x 24”, 24” x 48” • Alumin
PAGE 75
P Filler Panel • Steel or aluminum construction • Available in 9 sizes from 12” x 12” to 36” x 36” in 12” increments Miscellaneous Miscellaneous P Filler Panel Available Sizes 12” x 12”, 24” x 12”, 36” x 12”, 48” x 12”, 24” x 24”, 36” x 24”, 48” x 24”, 36” x 36” • Bright White finish Diffusers are factory-installed (must order with diffuser).
PAGE 76
Miscellaneous Miscellaneous FT Flexiturn • Extruded aluminum construction • Designed to pick up air from the main trunk at branch take-offs and divert it toward the grille • Mounts easily with sheet metal screws • Gang-operated blades move from 45 degrees open to fully closed • Positive setting • Mill finish APF Aluminum Plaster Frame FT Flexiturn Available Sizes Minimum: 8” x 4” Maximum: 36” x 18” APF Available Sizes Minimum: 6” x 4” Maximum: 48” x 48” • Aluminum construction • Provides attractive app
PAGE 77
Engineering Data Using the Engineering Data For mostthe of the models & sizes we’ve done the calculations for you. Using Engineering Data For most of the of models & sizes we’ve the calculations for you. CFM = volume air flow in cubic feet done per minute 421 Face Velocity Pressure Loss 4x10 CFM Ak Spread .170 Throw 300 400 500 600 700 800 .006 .010 .016 .022 .031 .040 50 4.5 70 5.0 85 6.5 100 7.5 120 9.0 135 10.0 4.0 6.0 8.0 10.0 11.0 12.
PAGE 78
Unlisted Sizes_Engineering Data Engineering Data When a size is not listed there are a couple ways to do an eng principles permit you to utilize existing sizes to determine size Engineering Data Sizing a Return Air volume going back to the air handler (fan) must equal what is supplied from the air handler. Therefore the total AFM capacity of the return grilles must equal or exceed the total CFM capacity of all the supply diffusers.
PAGE 79
Engineering Data Engineering Data 821, 831, (Page 6) Deflection C Deflection A Face Velocity Pressure Loss CFM 8x4 Ak .160 Throw CFM 10 x 4 Ak .202 Throw CFM 12 x 4 Ak .244 Throw CFM 14 x 4 Ak .286 Throw CFM 12 x 5 Ak .312 Throw CFM 10 x 6 Ak .314 Throw CFM 14 x 5 Ak .366 Throw CFM 12 x 6 Ak .379 Throw CFM 16 x 5 Ak .419 Throw CFM 14 x 6 Ak .444 Throw CFM 16 x 6 Ak .510 Throw CFM 20 x 5 Ak .526 Throw CFM 24 x 5 Throw Ak .634 CFM 20 x 6 Ak .640 Throw CFM 24 x 6 Ak .771 Throw CFM 20 x 8 Ak .
PAGE 80
Engineering Data Engineering Data 821, 831 (Page 6) Deflection G Terminal Velocity of 75 FPM Face Velocity Pressure Loss CFM 8x4 Throw Ak .119 CFM 10 x 4 Throw Ak .143 CFM 12 x 4 Throw Ak .173 CFM 14 x 4 Throw Ak .202 CFM 12 x 5 Throw Ak .220 CFM 10 x 6 Throw Ak .222 CFM 14 x 5 Throw Ak .258 CFM 12 x 6 Throw Ak .268 CFM 16 x 5 Throw Ak .296 CFM 14 x 6 Ak .314 Throw CFM 16 x 6 Ak .360 Throw CFM 20 x 5 Ak .372 Throw CFM 24 x 5 Throw Ak .448 CFM 20 x 6 Throw Ak .453 CFM 24 x 6 Throw Ak .
PAGE 81
Engineering Data Engineering Data 92HVO, 92HVV, 92VHO, 92VHV (Page 7, 8) Performance based on nominal sizes shown in bold Recommended Noise Criteria and Face Velocity Ranges are on page 75 79
PAGE 82
Engineering Data Engineering Data 92HVO, 92HVV, 92VHO, 92VHV (Page 7, 8) Performance based on nominal sizes shown in bold 80 Recommended Noise Criteria and Face Velocity Ranges are on page 75
PAGE 83
Engineering Data Engineering Data 92HVO, 92HVV, 92VHO, 92VHV (Page 7, 8) Performance based on nominal sizes shown in bold Recommended Noise Criteria and Face Velocity Ranges are on page 75 81
PAGE 84
Engineering Data Engineering Data 92HVO, 92HVV, 92VHO, 92VHV (Page 7, 8) Performance based on nominal sizes shown in bold 82 Recommended Noise Criteria and Face Velocity Ranges are on page 75
PAGE 85
Engineering Data Engineering Data 92HVO, 92HVV, 92VHO, 92VHV (Page 7, 8) Performance based on nominal sizes shown in bold Recommended Noise Criteria and Face Velocity Ranges are on page 75 83
PAGE 86
Engineering Data Engineering Data 92HVO, 92HVV, 92VHO, 92VHV (Page 7, 8) 84 Recommended Noise Criteria and Face Velocity Ranges are on page 75
PAGE 87
Engineering Data Engineering Data 92HVO, 92HVV, 92VHO, 92VHV (Page 7, 8) Recommended Noise Criteria and Face Velocity Ranges are on page 75 85
PAGE 88
Engineering Data Engineering Data 94A Series: 94A, 94AHOV, 94AT, 94HOV Return Air Grilles & Registers (Page 9-10, 56) 96AFB Steel Fixed-Bar Filter Grille (Page 10) Performance based on nominal sizes shown in bold 86 Recommended Noise Criteria and Face Velocity Ranges are on page 75
PAGE 89
Engineering Data Engineering Data 94A Series: 94A, 94AHOV, 94AT, 94HOV Return Air Grilles & Registers (Page 9-10, 56) 96AFB Steel Fixed-Bar Filter Grille (Page 10) Performance based on nominal sizes shown in bold Recommended Noise Criteria and Face Velocity Ranges are on page 75 87
PAGE 90
Engineering Data Engineering Data 94A Series: 94A, 94AHOV, 94AT, 94HOV Return Air Grilles & Registers (Page 9-10, 56) 96AFB Steel Fixed-Bar Filter Grille (Page 10) Performance based on nominal sizes shown in bold 88 Recommended Noise Criteria and Face Velocity Ranges are on page 75
PAGE 91
Engineering Data Engineering Data 94A Series: 94A, 94AHOV, 94AT, 94HOV Return Air Grilles & Registers (Page 9-10, 56) 96AFB Steel Fixed-Bar Filter Grille (Page 10) Performance based on nominal sizes shown in bold Recommended Noise Criteria and Face Velocity Ranges are on page 75 89
PAGE 92
Engineering Data Engineering Data PFG Perforated Face Grille (Page 11) PFG Perforated Face Grille Return Air Grille Balancing Data To Determine CFM: 1. Use an ALNOR Velometer with No. 2220 or 2220A Tip or a 4" rotating vane anemometer. If a 4" rotating vane anemometer is used, place dial face against perforated plate, and sample in a random manner for at least 1 minute. 2. Select proper Ak from Table by unit size and instrument used for measuring velocity. 3.
PAGE 93
Engineering Data Engineering Data H and V Series (Page 12-16) Deflection A Deflection C Face Velocity Pressure Loss CFM 8x4 Ak .156 Throw CFM 10 x 4 Ak .198 Throw CFM 12 x 4 Ak .240 Throw CFM 14 x 4 Ak .282 Throw CFM 12 x 5 Ak .310 Throw CFM 10 x 6 Ak .313 Throw CFM 14 x 5 Ak .364 Throw CFM 12 x 6 Ak .379 Throw CFM 16 x 5 Ak .418 Throw CFM 14 x 6 Ak .446 Throw CFM 16 x 6 Ak .512 Throw CFM 20 x 5 Ak .526 Throw CFM 24 x 5 Ak .634 Throw CFM 20 x 6 Ak .645 Throw CFM 24 x 6 Ak .777 Throw CFM 20 x 8 Ak .
PAGE 94
Engineering Data Engineering Data H and V Series (Page 12-16) 0 2000 .249 235 13.0 300 15.0 395 24.0 460 26.0 510 27.0 515 28.0 595 30.0 620 30.0 685 32.0 730 33.0 860 36.0 940 37.0 1040 39.0 1055 39.0 1275 43.0 1445 46.0 1600 49.0 1745 51.0 2180 57.0 2220 57.0 2640 69.0 2680 63.0 2780 64.0 3340 70.0 3360 70.0 4060 78.0 Deflection G Face Velocity Pressure Loss CFM 8x4 Throw Ak .118 CFM 10 x 4 Ak .149 Throw CFM 12 x 4 Ak .181 Throw CFM 14 x 4 Ak .212 Throw CFM 12 x 5 Ak .233 Throw CFM 10 x 6 Ak .
PAGE 95
C Series Curved-Blade Diffusers (Page 17-21) L Face Velocity Pressure Loss CFM 6 1. Determine the diffuser air pattern best suited 6Akx .090 Throw 1/2 to the duct layout and room area to be served. CFM 8x6 Ak .100 Throw 1/2 CFM 10 x 6 2. Select the air pattern type and CFM per Ak .150 Throw 1/2 CFM outlet. The tables give the recommended limits 8 x 8 Ak .160 Throw 1/2 of air volume per outlet for various ceiling CFM 12 x 6 Ak .180 Throw 1/2 heights.
PAGE 96
Engineering Data Engineering Data C Series Curved-Blade Diffusers (Page 17-21) L S L L S Three-Way S S S L S S S Four-Way L L Face Velocity Pressure Loss Total CFM 6x6 CFM L/S Ak .090 Throw L/S Total CFM 8x6 CFM L/S Ak .100 Throw L/S Total CFM 10 x 6 CFM L/S Ak .150 Throw L/S Total CFM 8x8 CFM L/S Ak .160 Throw L/S Total CFM 12 x 6 CFM L/S Ak .180 Throw L/S Total CFM 14 x 6 CFM L/S Ak .210 Throw L/S Total CFM 10 x 10 CFM L/S Ak .240 Throw L/S Total CFM 12 x 10 CFM L/S Ak .
PAGE 97
RH45, RH45T, RHD45, RHF45 ER45 Registers and Grilles (Page 24, 25, 56) Face Velocity 6x6 CFM Ps Ak .110 CFM 8x8 Ps Ak .240 CFM 12 x 6 Ps Ak .280 CFM 14 x 6 Ps Ak .330 CFM 14 x 8 Ps Ak .460 CFM 12 x 12 Ps Ak .610 CFM 24 x 8 Ps Ak .840 CFM 18 x 12 Ps Ak .950 CFM 30 x 8 Ps Ak 1.070 CFM 24 x 12 Ps Ak 1.290 CFM 18 x 18 Ps Ak 1.460 CFM 30 x 12 Ps Ak 1.630 CFM 20 x 20 Ps Ak 1.820 CFM 36 x 12 Ps Ak 1.980 CFM 24 x 20 Ps Ak 2.210 CFM 30 x 18 Ps Ak 2.500 CFM 24 x 24 Ps Ak 2.670 CFM 36 x 18 Ps Ak 3.
PAGE 98
Engineering Data Engineering Data RH90, RHD90 Registers and Grilles (Page 26) Face Velocity 6x6 CFM Ps Ak .130 CFM 8x8 Ps Ak .260 CFM 12 x 6 Ps Ak .300 CFM 14 x 6 Ps Ak .350 CFM 14 x 8 Ps Ak .490 CFM 12 x 12 Ps Ak .640 CFM 24 x 8 Ps Ak .870 CFM 18 x 12 Ps Ak .990 CFM 30 x 8 Ps Ak 1.100 CFM 24 x 12 Ps Ak 1.340 CFM 18 x 18 Ps Ak 1.510 CFM 30 x 12 Ps Ak 1.690 CFM 20 x 20 Ps Ak 1.890 CFM 36 x 12 Ps Ak 2.050 CFM 24 x 20 Ps Ak 2.280 CFM 30 x 18 Ps Ak 2.580 CFM 24 x 24 Ps Ak 2.770 CFM 36 x 18 Ps Ak 3.
PAGE 99
Engineering Data Engineering Data RE5, RED5, REF5 Series Return Air Registers and Grilles (Pages 23-24) Performance based on nominal sizes shown in bold 97
PAGE 100
Engineering Data Engineering Data RE5, RED5, REF5 Series Return Air Registers and Grilles (Pages 23-24) Performance based on nominal sizes shown in bold 98 Recommended Noise Criteria and Face Velocity Ranges are on page 75
PAGE 101
Engineering Data Engineering Data TG, TGF Transfer Grilles (Page 27) Face Velocity* 500 600 700 800 900 1000 1200 1400 1600 1800 2000 2200 2400 2600 10X6 Ak 0.29 CFM Ps 145 0.2 174 0.3 203 0.4 232 0.5 261 0.7 290 0.8 348 1.1 406 1.3 464 1.6 522 1.8 580 2.1 638 2.3 696 2.6 754 2.9 8X8 Ak 0.3 CFM Ps 150 0.1 180 0.3 210 0.4 240 0.5 270 0.6 300 0.8 360 1 420 1.3 480 1.5 540 1.7 600 2 660 2.2 720 2.5 780 2.7 12X6 Ak 0.34 CFM Ps 170 0 204 0.1 238 0.2 272 0.
PAGE 102
Engineering Data Engineering Data AR Series: ARE, ARF, ARS, ART (Page 31-33, 68) Square & Rectangular Ceiling Diffusers — Steel/Aluminum Four-Way Square Face Velocity Pressure Loss CFM 6x6 Ak .100 Throw X/Y CFM 9x9 Ak .220 Throw X/Y CFM 12 x 12 Ak .400 Throw X/Y CFM 15 x 15 Ak .620 Throw X/Y CFM 18 x 18 Ak .900 Throw X/Y CFM 21 x 21 Ak 1.230 Throw X/Y CFM 24 x 24 Ak 1.600 Throw X/Y CFM 27 x 27 Ak 2.020 Throw X/Y CFM 33 x 33 Ak 2.750 Throw X/Y 500 .
PAGE 103
Engineering Data Engineering Data AR Series: ARE, ARF, ARS, ART (Page 31-33, 68) Square & Rectangular Ceiling Diffusers — Aluminum Three-Way Style 3 Face Velocity Pressure Loss CFM 6x6 Ak .100 Throw X/Y CFM 9x9 Ak .220 Throw X/Y CFM 12 x 12 Ak .400 Throw X/Y CFM 15 x 15 Ak .620 Throw X/Y CFM 18 x 18 Ak .900 Throw X/Y CFM 21 x 21 Ak 1.230 Throw X/Y CFM 24 x 24 Ak 1.600 Throw X/Y CFM 27 x 27 Ak 2.020 Throw X/Y 500 .
PAGE 104
Engineering Data Engineering Data AR Series: ARE, ARF, ARS, ART Square & Rectangular Ceiling Diffusers — Aluminum (Page 31-33, 68) Two-Way Corner Style 2C Face Velocity 500 600 700 800 Pressure Loss .020 .020 .030 .040 CFM 45 55 60 70 6x6 Ak .090 Throw X/Y 1-3/1-3 2-5/2-5 2-5/2-5 3-7/3-7 CFM 95 115 135 155 9x9 Ak .190 Throw X/Y 4-6/4-6 4-6/4-6 5-7/5-7 5-8/5-8 CFM 175 210 245 280 12 x 12 Ak .350 Throw X/Y 5-7/5-7 5-8/5-8 6-11/6-11 8-13/8-13 CFM 275 330 385 440 15 x 15 Ak .
PAGE 105
Engineering Data Engineering Data AR/SR Series: ARE, ARF, ARS, ART, SRE Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Two-Way Style 2L Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw Y CFM 12 x 6 Ak .170 Throw Y CFM 15 x 6 Ak .220 Throw Y CFM 12 x 9 Ak .260 Throw Y CFM 15 x 9 Ak .320 Throw Y CFM 18 x 9 Ak .390 Throw Y CFM 21 x 9 Ak .450 Throw Y CFM 15 x 12 Ak .430 Throw Y CFM 18 x 12 Ak .520 Throw Y CFM 21 x 15 Ak .760 Throw Y CFM 24 x 15 Ak .870 Throw Y CFM 21 x 18 Ak .
PAGE 106
Engineering Data Engineering Data AR/SR Series: ARE, ARF, ARS, ART, SRE Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) Two-Way Style 2 Face Velocity Pressure Loss CFM 6x6 Ak .090 Throw Y CFM 9x9 Ak .190 Throw Y CFM 12 x 12 Ak .350 Throw Y CFM 15 x 15 Ak .550 Throw Y CFM 18 x 18 Ak .780 Throw Y CFM 21 x 21 Ak 1.080 Throw Y CFM 24 x 24 Ak 1.410 Throw Y CFM 27 x 27 Ak 1.760 Throw Y 500 .020 45 3-5 95 5-7 175 4-7 275 8-12 390 9-15 540 11-17 705 12-19 880 12-20 600 .
PAGE 107
Engineering Data Engineering Data AR/SR Series: ARE, ARF, ARS, ART, SRE Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 30-33) One-Way Style 1L Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw CFM 12 x 6 Ak .170 Throw CFM 15 x 6 Ak .220 Throw CFM 12 x 9 Ak .260 Throw CFM 15 x 9 Ak .320 Throw CFM 18 x 9 Ak .390 Throw CFM 15 x 12 Ak .430 Throw CFM 18 x 12 Ak .520 Throw CFM 21 x 15 Ak .760 Throw CFM 24 x 15 Ak .870 Throw CFM 21 x 18 Ak .910 Throw CFM 27 x 21 Ak 1.380 Throw 500 .
PAGE 108
Engineering Data Engineering Data ASRE, ASRS Square Supply Return Diffuser — Aluminum (Page 34) Four-Way Square Face Velocity Pressure Loss 500 .020 600 .020 700 .030 90 .01 2-4/2-4 <30 105 .02 2-4/2-4 <30 120 .02 3-5/3-5 <30 CFM 9x9 Grid Core -Ps NC Ak .340 65 <.01 <30 80 <.01 <30 90 <.01 <30 Face Velocity Pressure Loss 500 .020 600 .020 700 .030 200 .01 3-5/3-5 <30 240 .02 4-6/4-6 <30 280 .02 4-8/4-8 <30 150 .01 <30 180 .02 <30 210 .02 <30 500 .020 600 .020 700 .030 250 .
PAGE 109
Face Velocity Pressure Loss 500 .020 600 .020 CFM Ps Throw X/Y NC 24 x 24 Ak .700 CFM 18 x 18 Grid Core -Ps Ak 1.600 ASRS NC ASRE, 350 .01 3-5/3-5 <30 Square 420 .02 3-7/3-7 <30 260 <.01 <30 Supply 315 <.01 <30 Return 490 .02 4-7/4-7 <30 365 <.01 <30 Diffuser 800 900 1000 .040 .050 .060 Supply Performance Data 560 630 700 .03 .04 .05 4-9/4-9 5-11/5-11 5-11/5-11 <30 <30 <30 Return Performance Data 420 470 525 <.01 <.01 <.01 <30 <30 — Aluminum (Page 34)<30 1200 .090 1400 .120 1600 .160 1800 .
PAGE 110
Engineering Data Engineering Data TY MCD, MCDD, MCDS, MCDSD, MCDST, MCDSDT (Page 35, 36, 68, 69) Modular Ceiling Diffuser — Aluminum TX TX TY Two Way Face Velocity Pressure Loss CFM 6x6 Throw X/Y Ak .090 NC CFM 8x8 Throw X/Y Ak .150 NC CFM 10 x 10 Throw X/Y Ak .250 NC CFM 12 x 12 Throw X/Y Ak .370 NC CFM 14 x 14 Throw X/Y Ak .520 NC CFM 16 x 16 Throw X/Y Ak .700 NC CFM 18 x 18 Throw X/Y Ak .900 NC CFM 20 x 20 Throw X/Y Ak 1.100 NC CFM 22 x 22 Throw X/Y Ak 1.330 NC 500 .
PAGE 111
12 x 12 Ak .
PAGE 112
Engineering Data 100 1500 075 .140 140 195 7.0 9.0 180 240 0.0 13.0 290 395 2.0 14.0 470 610 2.0 15.0 610 800 4.0 18.0 Engineering Data A500 Series (Page 70) S Face Velocity Pressure Loss CFM 6x6 Throw Ak .13 CFM 8x8 Throw Ak .20 10 x 10 CFM Throw Ak .29 12 x 12 CFM Throw Ak .42 14 x 14 CFM Throw Ak .59 400 .010 55 5.0 75 6.0 115 7.0 170 8.0 250 11.0 500 .016 65 6.0 90 7.0 135 8.0 210 10.0 305 13.0 600 .022 75 7.0 105 8.0 155 10.0 255 12.0 360 15.0 700 .031 90 8.0 120 10.0 175 12.0 300 15.0 410 18.
PAGE 113
Engineering Data Engineering Data SS Spiral Diffuser (Page 38) See notes on next page and see page 38 for min. duct diameter. 1/2” wide slot–nonducted ½" wide slot - nonducted 7 10 13 17 20 1-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .002 7-4-2 <15 .003 11-6-4 <15 .006 15-7-5 <15 .009 19-9-6 <15 .016 22-11-7 <15 10 17 23 30 37 43 2-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .001 6-3-2 <15 .
PAGE 114
Engineering Data Engineering Data SS Spiral Diffuser (Page 38) Notes: 1. Tests conducted in accordance with ANSI/ASHRAE 70-1991 at isothermal conditions. 2. Engineering Units: Airflow Rate = CFM/linear foot Static Pressure = in. w.c. Throw = ft. at 50, 100, and 150 FPM terminal velocity 3. Noice Criteria is based on 10 dB room absorption (Re: 1012 watts) evaluated at 125 through 4000 Hz octave bands. 4. Throw data are based on a horizontal discharge in one direction only.
PAGE 115
Engineering Data Engineering Data SV and SVH Spiral Diffusers USV, USVH Universal Spiral Diffusers (Page 37-38) See page 38 for min. duct diameter. Face Velocity 300 400 500 Total Pressure .016 .029 .046 CFM 42 56 70 10 x 3 Horizontal Throw 7-3 8-4 9-5 Ak .14 Noise Criteria CFM 54 72 90 12 x 3 Horizontal Throw 8-5 9-6 10-7 Ak .18 Noise Criteria 63 84 105 10 x 4 14 CFM Horizontal Throw 8-5 10-7 11-8 x3 Ak .21 Noise Criteria 75 100 125 16 x 3 12 CFM Horizontal Throw 9-5 11-7 12-8 x4 Ak .
PAGE 116
Engineering Data Engineering Data L Series (Page 39-42) NOTES: 1. Table 1 based on up to 4-foot grille length. For longer lengths, correct throw and NC per Table 2. 2. When using continuous grille lengths with alternate active and inactive sections, a reduction in throw can be obtained by omitting the factors contained in Table 2. 3. Bar style 30 and 0 Increase Table 1 NC + 5 NC 4. Supply air temperature effect on horizontal throw is shown in Table 3.
PAGE 117
Engineering Data Engineering Data L Series (Page 39-42) Table 2 - Continuous Grille Length Factors Table 5 - Supply Grille Areas (per foot of length) Modify Table 1 by listed values for grille lengths above 4 feet. Grille Length in Feet 4-6 7-20 21-100 Throw (T) Sidewall Sill/Floor Min.-Max. Min.-Max. No Change T x 1.10 T x 1.15 NC +0 +5 +10 An 1½ .13 2 .17 2½ .21 3 .25 4 .33 5 .42 Listed Width in Inches 6 8 10 12 14 16 18 20 24 30 36 .50 .67 .84 1.00 1.20 1.30 1.50 1.70 2.00 2.50 3.00 Ak .
PAGE 118
Throw (T) in Feet Engineering Data CFM/Ft of total Slot length Number of Slots Min. P s Outlet Velocity (V k ) FPM Ceiling Sidewall Sill Minimum Ceiling Height in Feet Min.-Max. Min.-Max. Min.-Max. @ -18F T @ -25F T NC in H 2 O 1 .02 500 5-7 3-5 1-2 <20 7½ 9 2 <.01 335 4-6 2-4 1-2 <20 1 .08 1000 10-13 8-11 1-3 20 20 2 .02 670 8-11 6-9 2-3 8 9 <20 3 .01 400 6-9 4-7 1-2 <20 1 .08 1500 11-16 10-14 4-6 25 2 .05 1000 10-14 8-12 3-4 20 30 9 10 3 .02 600 8-11 6-9 2-3 <20 4 .
PAGE 119
180 .05 .10 .08 .07 .10 .08 940 1280 1200 1060 1335 1175 Engineering Data 19-28 24-35 23-34 22-32 25-39 24-37 17-25 21-31 20-30 19-29 22-35 21-33 8-17 12-22 11-21 10-20 - 12 15 12 15 20 30 25 25 30 25 S Series (Page 43-46) 500 600 700 .02 .02 .03 Engineering Data 200 10 8 9 10 9 10 Outlet Velocity (Vk ) FPM 800 900 1000 1200 1400 1600 180 Total Pressure (P t ) inches H2 O .04 .05 .06 .09 .12 .
PAGE 120
Engineering Data 180 6 7 8 9 10 6 7 8 9 10 8 9 (Page 10 .09 .07 .05 .04 .03 .11 .08 .06 .05 .04 .10 .07 43-46) .
PAGE 121
Engineering Data Engineering Data S Series (Page 43-46) NOTES: 1. Table 1 based on 4-foot diffuser length. For longer lengths, correct throw and NC per Table 2. 2. For 2-way ceiling throw, proportion cfm and number of slots in each direction of T and select from 1-way data, Table 1. 3. When using continuous diffuser lengths with alternate active and inactive sections, a reduction in throw can be obtained by omitting the factors contained in Table 2. 4.
PAGE 122
Engineering Data 800 040 254 228 -32 378 -37 576 -48 738 -56 936 -61 116 -65 494 -72 890 -86 800 040 254 080 -64 350 -73 620 -81 890 -89 160 -96 700 100 330 118 870 135 Engineering Data DL Drum Louver (Page 47) 6-Inch Neck Area Outlet* Velocity Static Pressure (Ft2) Total Pressure CFM .375 .16 6x9 Throw CFM .500 .21 6 x 12 Throw CFM .750 .32 6 x 18 Throw CFM 1.000 .41 6 x 24 Throw CFM 6 x 30 .52 1.250 Throw CFM 6 x 36 .62 1.500 Throw CFM 2.000 6 x 48 .83 Throw CFM 2.500 6 x 60 1.
PAGE 123
1800 .040 .254 1080 2-64 1350 6-73 1620 0-81 1890 4-89 2160 9-96 2700 -100 3330 -118 3870 -135 Engineering Data 1800 .040 .254 228 1-32 378 2-37 576 0-48 738 6-56 936 0-61 1116 4-65 1494 9-72 1890 4-86 Engineering Data DL Drum Louver (Page 47) 12-Inch Outlet* Velocity 800 1000 Static Pressure .007 .010 (Ft2) Total Pressure .039 .065 CFM 560 700 12 x 20 .70 1.670 Throw 10-20-35 18-25-43 CFM 840 1050 12 x 30 1.05 2.500 Throw 17-25-42 24-32-53 CFM 1120 1400 12 x 40 1.40 3.330 2100 Throw 20-28-49 27-36-62 .
PAGE 124
Stationary Louvers 245ZC, 245ZF (Page 50) 1530ZC, 1530ZF (Page 49) 36 1.19 36 1.96 1.19 2.72 1.96 3.48 2.72 4.24 5.00 3.48 5.77 4.24 6.53 5.00 7.29 5.77 8.05 6.53 8.81 7.29 9.58 8.05 36 10.34 8.81 1.19 11.10 9.58 1.96 10.34 2.72 11.10 3.48 4.24 5.00 5.77 6.53 36 7.29 0.96 8.05 1.61 8.81 36 2.26 9.58 0.96 2.92 10.34 1.61 11.10 3.57 2.26 4.22 2.92 4.87 3.57 5.52 4.22 6.17 4.87 6.82 5.52 7.47 6.17 36 8.12 6.82 0.96 8.78 7.47 1.61 9.43 8.12 2.26 8.78 2.92 9.43 3.57 4.22 4.87 5.52 6.17 36 6.82 0.82 7.47 1.
PAGE 125
Engineering Data Engineering Data 4-Way Rezzin TBar Diffuser (Page 59) 6" 8" 10" 12" 14" CFM Static Pressure Total Pressure NC CFM Static Pressure Total Pressure NC CFM Static Pressure Total Pressure NC CFM Static Pressure Total Pressure NC CFM Static Pressure Total Pressure NC 400 79 .003 .015 140 .009 .019 218 .009 .019 314 .015 .025 428 .015 .025 - 500 98 .005 .024 175 .014 .030 273 .014 .029 393 .022 .038 535 .023 .037 - 600 118 .006 .034 209 .021 .043 327 .021 .042 471 .032 .054 641 .033 .
PAGE 126
Engineering Data Engineering Data Rezzin Modular Core Tbar Diffuser (Page 59) Throw Data - Terminal Velocity of 75 FPM 400 79 3.5 4.5 0.9 1.2 0.6 500 98 4.4 5.6 1.1 1.5 0.8 600 118 5.3 6.8 1.3 1.8 0.9 700 137 6.2 7.9 1.5 2.1 1.1 800 157 7.1 9.0 1.7 2.5 1.2 900 1000 1200 1400 1600 177 196 236 275 314 7.9 8.8 10.6 12.4 14.1 10.2 11.3 13.6 15.8 18.1 2.0 2.2 2.6 3.0 3.5 2.8 3.1 3.7 4.3 4.9 1.4 1.5 1.8 2.1 2.
PAGE 127
Engineering Data Engineering Data Rezzin Square Ceiling Diffuser (Page 60) Rezzin Square (two-way corner) Neck Velocity Neck Size 6" Ak 0.284 Vt 75 Vt 100 Vt 150 7" Neck size Ak 0.267 Vt 75 Vt 100 Vt 150 8" Neck size Ak 0.251 Vt 75 Vt 100 Vt 150 300 60 0.002 2.5 2.5 1.5 82 0.009 4.0 3.5 2.5 105 0.016 5.0 4.5 3.0 CFM Ps Throw Throw Throw CFM Ps Throw Throw Throw CFM Ps Throw Throw Throw 400 80 0.004 3.5 3.0 2.0 109 0.016 5.0 4.5 3.0 140 0.029 6.5 6.0 4.0 500 100 0.006 4.0 4.0 2.5 136 0.025 6.0 5.5 4.
PAGE 128
Engineering Data Engineering Data 659T/659TI/PFT/PFTI Series Performance (Page 52, 55) 441 & 445 (Page 58) Average Face Velocity 659T CFM Ak 2.440 -Ps PFT CFM Ak 2.740 -Ps 659-TI w/12" collar CFM Ak 2.230 -Ps w/14" collar CFM Ak 2.260 -Ps w/16" collar CFM Ak 2.320 -Ps PFTI w/12" collar CFM Ak 2.320 -Ps w/14" collar CFM Ak 2.590 -Ps w/16" collar CFM Ak 2.630 -Ps Neck Velocity CFM 6" Diameter Ps NC Ak .370 441 Throw Ak .430 445 Throw CFM 8" Diameter Ps NC Ak .450 441 Throw Ak .
PAGE 129
REN4 (Page 58) RENPS, RENPS 56, ARENPS, PDS (Page 64, 66) Neck Velocity 180 220 300 350 400 450 500 580 CFM 35 45 60 70 80 90 100 115 Ps .002 .003 .004 .006 .008 .010 .012 .015 NC <20 <20 <20 <20 <20 <20 20 22 Throw 3.0 3.5 4.5 5.5 6.5 7.5 8.0 9.0 CFM 65 75 105 120 140 155 175 200 8" Diameter Ps .002 .003 .006 .008 .010 .013 .016 .021 Neck Velocity NC 300 400 800 <20 900 1000 <20 500 <20 600<20700 <20 22 1100 25 30 Ak .530 CFM 60 80 160 8.5 180 9.5 200 11.0 220 12.0 Throw 4.0 1005.0 1206.0140 7.
PAGE 130
Engineering Data Engineering Data Probe Position: The probe is held 1 inch in from the outer edge of the diffuser, flush with the face. PROBE POSITION 1 2 3 4 Four-Way (Short Throw) • For throw in all four directions, use short throw data. Three-Way (Short Throw) • For throw in all three directions, use short throw data. 1 2 3 4 Three-Way (Long & Short) • For throw in the #2 & #4 direction use long throw data. 1 2 3 4 • For throw in the #1 & #3 directions, use short throw data.
PAGE 131
Engineering Data Engineering Data CBPS Supply (Page 65) One-Way Supply Neck Size CFM Ps 6" Throw NC CFM Ps 8" Throw NC CFM Ps 10" Throw NC CFM Ps 12" Throw NC CFM Ps 14" Throw NC CFM Ps 16' Throw NC 300 60 .060 2.5-4.0-5.0 <20 105 .080 4.0-6.0-7.0 <20 165 .080 4.5-7.0-8.5 <20 235 .080 5.5-8.5-10.0 <20 325 .110 4.5-7.0-8.5 <20 420 .020 5.0-8.0-10.0 <20 400 80 .080 3.5-5.0-6.0 <20 140 .110 5.5-8.0-9.5 <20 220 .110 6.5-9.5-11.5 <20 315 .110 7.5-11.0-13.5 20 430 .140 6.5-9.5-11.5 20 560 .040 7.0-10.0-12.
PAGE 132
Engineering Data Ps .030 .040 10" Throw 4.5-6.5-8.0 5.5-8.5-10.5 NC <20 <20 CFM 235 315 Ps .020 .030 12" Throw 4.5-6.5-8.0 5.5-8.5-10.0 NC <20 <20 CFM 325 430 Ps .020 .030 14" Throw 4.0-5.0-7.0 5.5-8.0-9.5 NC <20 <20 CFM 420 560 Ps .020 .040 16' Throw 5.0-6.0-8.0 6.0-9.0-10.0 CBPS Supply (Page 65) NC <20 <20 .060 7.0-10.5-12.5 <20 395 .050 7.0-10.5-12.5 21 535 .050 6.0-9.0-11.0 20 700 .060 7.0-9.0-12.0 26 Engineering Data .090 8.5-12.5-15.0 21 470 .070 8.5-12.5-15.0 27 640 .070 8.0-12.0-14.5 25 840 .
PAGE 133
Engineering Data Engineering Data Screw Hole Location Chart 92 Series, 94 Series, 821, 831 (Page 5-11) Recommended Noise Criteria and Face Velocity Ranges are on page 75 131
PAGE 134
Engineering Data Engineering Data Screw Hole Chart for Extruded Aluminum Line V Series, H Series, C Series, RH Series (Pages 12-21, 25-26) 132 Recommended Noise Criteria and Face Velocity Ranges are on page 75
PAGE 135
Engineering Data Engineering Data Drop Chart, Use with size selection charts 821, 831, 92 Series, 98VOH, H and V Series (Page 7-16) Instructions for use of Drop Chart The drop of the air stream is determined by using the throw and velocity of the register selected. On the drop chart, lay a straight edge connecting these values. The total drop of the air stream will be the sum of the drop due to temperature (Dt) and the drop due to spread (Ds).
PAGE 136
Engineering Data Engineering Data 92 Series, H and V Series Alternate Sizing Graph (Page 7-16) Turning Line Grille Width in Inches Method of Determining Alternate Grille Sizes Extensive tests indicate that by varying dimensions of a grille there is no appreciable effect on the air throw, provided the same area is maintained. To change the dimensions of a grille, place a straight edge across the width and height scales on dimensions as selected from charts.
PAGE 137
Surfaire® T-Bar Diffusers Furnish and install Hart & Cooley SurfAire® insulated ceiling diffusers as shown on the plans. The diffuser shall be a 2’x2’ T-Bar lay-in. Face shall be stucco embossed aluminum with off-white baked enamel finish for ceiling aesthetics, corrosion protection and ease of cleaning. Face will have formed deflector apertures which distribute air in thin layers along the ceiling surface and which provide for optimum dispersion in one, two, three, four-way or two-way corner patterns.
PAGE 138
Glossary of Terms Glossary of Terms Ceiling or Wall Effect The tendency of an air stream moving along a wall or ceiling surface to remain in contact with that surface. Radius of Diffusion, Ft. The horizontal distance (throw) from a ceiling diffuser to the point of terminal velocity. Core Area The total plane area of that portion of a grille, face, or register bounded by a line tangent to the outer opening through which air can pass. The core area is less than the register size. Example, a 14-in. x 8-in.
PAGE 139
Product Information A500P AD ADPD AFPD APF AR6 AR7 ARE ARENPS ARF ARS ART ASRE ASRS BV C3 C4 CBPR CBPS CD3 CD4 CH1 CH2 CHD1 CHD2 CHM1 CHM2 CM3 CM4 DL DP DPD DPD R6 DPD12 DT FPD/FPDR6 FPD12 FPD3/FPD3R6 FT HD HV HVD HVS/HVSR6 HM HX L MCD/MCDD MCDS MCDSD MCDST MCDSDT MFB Alpha-Numeric Index Alpha-Numeric Index Engineering Data Steel—Panel Extruded Aluminum Face.............................................................70....................... 110 Damper....................................................
PAGE 140
Alpha-Numeric Index Alpha-Numeric Index Product Information P Panel PD PDR PDS PDSD PFT PFTI PFG RCB/RCBD RCBF RCBFT RCBT RD RE5 RE5T RE5TI RED5 REF5 REF5T REF5TI REN4 RENP RENPS RH45 RH45T RH90 RHD90 RHF45 RHD45 RHF45T RZ-Round RZ-Square Back Panel Mod Core Egg Crate Sq to Rd 4-Way Tbar S SBP SMF SR/AR SR7 SS SV SVH T19 T-Bar Panel TG/TGF 138 Engineering Data Filler Panel..........................................................................................................73........................
PAGE 141
Product Information USV USVH VD VH VHD VM VX 4ABC 19 20 21 22 23 24 245 444, 441-445 445 645 659T 659TI 673T 673TI 673TPI R6 811-814 821 831 92HVO 92HVV 92VHO 92VHV 94A 94AHOV 94HOV 94AT 96AFB 96AFBT 96AFBTI 1530 1545 3800 5400PP 5400 6400 9200V Engineering Data Single-Deflection Universal Diffuser...................................................................37....................... 113 Double-Deflection Universal Diffuser..................................................................38..........
PAGE 142
install confidence. Hart & Cooley, Inc. 5030 Corporate Exchange Blvd. SE Grand Rapids, MI 49512 P (800) 433-6341 F (800) 223-8461 hartandcooley.com GRILLES | REGISTERS | DIFFUSERS | FLEXIBLE AIR DUCT | VAV BOXES VENT | CHIMNEY | ACCESS DOOR | FILTERS | DUCT COMPONENTS Form No. 851531 06/2016 2016 Hart & Cooley is a registered trademark of Johnson Controls, Inc. in the United States and other countries.