Light Commercial Construction Features Your reputation, and your success, Reputations are built on hard work is on the line with every customer, and repeatable performance. every installation, every product you Hart & Cooley products are use. You can protect your good designed and manufactured to the name by using ours. Hart & Cooley highest performance standards, offers over a century of proven backed by experienced and timely product innovation and in-use customer service.
Registers & Grilles - Steel Registers & Grilles - Steel 821 • All-steel construction • Vertical adjustable face bars • Horizontal multi-shutter valve • Bright White finish Note: Screw hole location details on page 161 HT 6 4 X 5 6 X 8 10 12 14 16 18 20 24 821 Available Sizes (in.
Registers & Grilles - Steel 92HVO Grille All-steel construction Adjustable face bars may be set to any desired deflection Horizontal front bars Vertical second bars Larger sizes available in multiple-piece construction Bright White finish HT Note: Screw hole location details on page 161 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 8 X X X X 92HVO Available Sizes (in.
Registers & Grilles - Steel Registers & Grilles - Steel 92VHO Grille • • • • • • All-steel construction Vertical front bars Horizontal second bars Adjustable face bars may be set to any desired deflection Larger sizes available in multiple-piece construction Bright White finish HT Note: Screw hole location details on page 161 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 8 X X X X 92VHO Available Sizes (in.
Registers & Grilles - Steel 94 Grille HT Note: Screw hole location details on page 161 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 8 X X X X 94 Available Sizes (in.
Registers & Grilles - Steel Registers & Grilles - Steel 94A Grille • All-steel construction • Horizontal face bars set at 35° • Larger sizes available in multiple-piece construction • Also available as 94AT T-Bar Return Grille (see page 91) • Bright White finish HT 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 8 X X X X 94A Available Sizes (in.
Registers & Grilles - Steel 98VOH Ventilation Grille 30 32 34 36 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: Screw hole location details on page 161 98VOHP Ventilation Grille Detail of optional pulley (98VOHP) for remote adjustment of deflection louvers. Field-installed center pulley over lever.
Registers & Grilles - Aluminum Registers & Grilles - Aluminum HX Grille • Extruded aluminum construction • Horizontal front bars • Single row of individually adjustable horizontal face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish HT 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 4 X X X X 6 X X X X 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X HX Available Sizes (in.
Registers & Grilles - Aluminum HM Register Extruded aluminum construction Single row of individually adjustable horizontal face bars Pivoted bars for easy positive setting Lever-operated, multi-shutter valve Bright White or Satin Anodized finish HT HM Available Sizes (in.
Registers & Grilles - Aluminum Registers & Grilles - Aluminum HVD Register • Extruded aluminum construction • Two rows of individually adjusted face bars for horizontal and vertical deflection • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized finish HT 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 Note: Screw hole location details on page 162 HVD Availab
Registers & Grilles - Aluminum VD Register Extruded aluminum construction Vertical front bars Single row of individually adjustable face bars Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized finish HT Note: Screw hole location details on page 162 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 VD Available Sizes (in.
Registers & Grilles - Aluminum Registers & Grilles - Aluminum VH Grille • • • • • • Extruded aluminum construction Vertical front bars Horizontal second bars Two rows of individually adjusted face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Bright White or Satin Anodized finish HT Note: Screw hole location details on page 162 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38 40 42
Registers & Grilles - Aluminum CH 1 Grille Note: Screw hole location details on page 162 6 8 10 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 Note: Screw hole location details on page 162 CHM1 Register • Extruded aluminum construction • One-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Multi-shutter valve • Bright White or Satin Anodized finish Note: Screw hole location details on page 162 Engineering Data on Page 128 30 X X X X X X X
Registers & Grilles - Aluminum Registers & Grilles - Aluminum CH2 Grille • Extruded aluminum construction • Two-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 162 6 8 10 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 • Extruded aluminum construction • Two-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Oppos
Registers & Grilles - Aluminum C3 Grille Note: Screw hole location details on page 162 6 8 10 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 Note: Screw hole location details on page 162 HT 6 8 10 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 Note: Screw hole location details on page 162 Engineering Data on Page 129 32 X X X X X X X X X X X X X X 34 X X X X X X X X X X X X X X X 36 X X X X X X X X X X X X X X X X CD3 Available Sizes (in.
Registers & Grilles - Aluminum Registers & Grilles - Aluminum C4 Grille • Extruded aluminum construction • Four-way deflection • Individually adjustable curvedface bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 162 HT 6 8 10 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 Note: Screw hole location details on page 162 HT 6 8 10 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 Note: Screw hole location
Registers & Grilles - Aluminum CH2CL Grille Note: Screw hole location details on page 162 CH2CR Grille • Extruded aluminum construction • Two-way deflection • Individually adjustable curvedface bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 162 Engineering Data on Page 128 32 X X X X X X X X X X X X X X 34 X X X X X X X X X X X X X X X 36 X X X X X X X X X X X X X X X X 32 X X X X X X X X X X X X X X 34 X X X X X X X X
Registers & Grilles - Aluminum Registers & Grilles - Aluminum RCB Grille RCBD Register • • • • Extruded aluminum construction Curved blades fixed on one-inch spacing Opposed-blade damper Bright White or RCB/RCBD Available Sizes (in.
Registers & Grilles - Aluminum RE5 Grille • • • • HT 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 RE5 Available Sizes (in.
Registers & Grilles - Aluminum Registers & Grilles - Aluminum REF5 Filter Grille, Grid Core • • • • • All-aluminum construction ½" x ½" x ½" square core design Accommodates standard 1" thick disposable filter (not included) Filter grilles equipped with knurled knob fasteners Bright White or Mill finish HT 6 8 10 4 X X X 5 X X X 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 25 26 28 30 32 34 36 REF5 Available Sizes (in.
Registers & Grilles - Aluminum RHD45 Register Extruded aluminum construction Horizontal bars at 45 degrees Face bars permanently fixed into heavy aluminum frames at a 45-degree angle Opposed-blade damper Bright White or Satin Anodized finish HT 6 8 10 12 14 4 X X X X X 5 X X X X X 6 X X X X X 8 X X X X 10 X X X 12 X X 14 X 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 RHD45 Available Sizes (in.
Registers & Grilles - Aluminum RH90 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Face bars permanently fixed into heavy aluminum frames at a 90-degree angle from face • Bright White or Satin Anodized finish HT 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 4 X X X X 6 X X X X 8 X X X X 10 X X X X X 12 X X X X X X 14 X X X X X X X RH90 Available Sizes (in.
Registers & Grilles - Aluminum TG Transfer Grille Extruded aluminum construction Vision proof Inverted "Y" type grille bar for best vision proof quality and airflow Excellent for installation in doors or partitions Bright White or Satin Anodized finish Registers & Grilles - Aluminum • • • • • TGF Transfer Grille Frame • Extruded aluminum construction Note: When framing both sides of the door or partition opening, use the TGF frame with the TG Grille. Adjustable from 1" to 21/8" door thickness.
Ceiling Diffusers - Steel Ceiling Diffusers - Steel 20 Round Diffuser 62 20 Available Sizes (in.
Ceiling Diffusers - Steel 19 Damper • Steel construction • Opposed-blade damper • Bright White finish • Duct-mount only Damper 6 S 515/16 P 3 31/2 49/16 49/16 49/16 49/16 49/16 49/16 Ceiling Diffusers - Steel Note: 3/16" Hex Damper handle (by others) will lock into position if inserted too far into damper 19 Damper Listed Sizes (in.
Ceiling Diffusers - Steel SRE Diffuser • • • • Ceiling Diffusers - Steel Steel construction Removable core Flat (extended) margin style Optional factory-mounted opposed-blade damper available as SRED • Bright White enamel finish 6 9 12 15 18 21 24 24 X X X X X X X See page 68 for available air patterns.
Ceiling Diffusers - Steel SR6 Control Grid • • • • Steel construction Field-mounts on diffuser Used to control airflow at the diffuser Mill finish HT 6 9 12 15 18 21 24 HT 6 9 12 15 18 21 24 SR7 Available Sizes (in.) WIDTH 6 9 12 15 18 21 X X X X X X X X X X X X X X X X X X X X X 24 X X X X X X X Ceiling Diffusers - Steel SR7 Volume Damper • Steel construction • Used to control airflow at the diffuser • Mill finish • Duct-mount only SR6 Available Sizes (in.
Ceiling Diffusers - Aluminum Ceiling Diffusers - Aluminum ARE Diffuser • Extruded aluminum construction • Removable core • Flat (extended) margin style • Optional factory-mounted aluminum opposed-blade damper available as ARED • Bright White or Satin Anodized finish 6 9 12 15 18 21 24 27 30 33 36 6 X 30 33 36 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: Number of cones varies by size of diffuser See page 68 for available air patterns.
Ceiling Diffusers - Aluminum ARS Diffuser HT ARS Available Sizes (in.) WIDTH 9 12 15 18 21 24 27 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 6 6 X 9 12 15 18 21 24 27 30 33 36 Note: Number of cones varies by size 30 33 36 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X of diffuser See page 68 for available air patterns.
Ceiling Diffusers - Steel/Aluminum Neck View Type SR & AR Air Patterns Style Listed Sizes Ceiling Diffusers - Steel/Aluminum 6x6 9x9 12x12 15x15 18x18 21x21 STYLE 4 9x6 to 45x6 12x9 to 45x9 15x12 to 45x12 18x15 to 45x15 21x18 to 45x18 9x6 to 36x6 12x9 to 36x9 15x12 to 36x12 18x15 to 36x15 21x18 to 36x18 STYLE 3 24x21 to 45x21 27x24 to 45x24 30x27 to 45x27 33x30 to 45x30 36x33 to 45x33 24 x 21 Max. in Steel Listed Sizes 6x6 9x9 12x12 15x15 18x18 21x21 24x24 27x27 30x30 33x33 36x36 24 x 24 Max.
Ceiling Diffusers - Aluminum ASRE Diffuser ASRS Diffuser • Extruded aluminum construction • Step-down (beveled) margins overlap opening and lowers the diffuser from the ceiling • For use with roof-mounted installations • Removable core • Bright White or Satin Anodized finish • Return damper available - AR7 • Supply damper available - AS7 Engineering Data on Page 140-141 ASRS Available Sizes (in.
Ceiling Diffusers - Aluminum Ceiling Diffusers - Aluminum MCD Adjustable Modular Diffuser MCD Available Sizes (in.) 6" x 6", 8" x 8", 10" x 10", 12" x 12", 14" x 14", 16" x 16", 18" x 18", 20" x 20", 22" x 22" • Extruded aluminum construction • Four modular cores provide variable pattern adjustments of four-way, three-way, two-way, or one-way horizontal air patterns • Flat (extended) margin • Fixed fins • Bright White finish MCDD Adjustable Modular Diffuser MCDD Available Sizes (in.
Ceiling Diffusers - Aluminum MCDSD Adjustable Modular Diffuser MCDSD Available Sizes (in.) 6" x 6", 8" x 8", 10" x 10", 12" x 12", 14" x 14", 16" x 16", 18" x 18", 20" x 20", 22" x 22" For T-Bar application, see page 101.
Spiral Diffusers Spiral Diffusers Model SV Single-Deflection Diffuser (Shown with scoop) Size restrictions apply. See price list for sizes and ordering information. SV Available Sizes (in.
Spiral Diffusers Model USVH Double Deflection Universal Diffuser Size restrictions apply. See price list for sizes and ordering information. USVH Available Sizes (in.) 10" x 3" to 36" x 12" Model SS Slot Face Diffuser Size restrictions apply. See price list for sizes and ordering information. SS Available Sizes (in.
Linear and Slot Diffusers HOW TO ORDER LS/LF Series Diffuser Linear and Slot Diffusers Minimum width 1½" Note: Floor application must be ordered as "LF." Eight-inch maximum width for constant traffic; 12" maximum width for occasional traffic; maximum length 72". See following page for dimensional data.
Linear and Slot Diffusers L Series - Dimensional Data Mounting Style 0 (Floor/Sill) LF Mounting Style 3 Mounting Style GO Mounting Style 00 (Bars Only) 00 Bar Style Only w/o Mounted Damper or Control Grid (Ceiling/Sidewall) LS (Concrete/Tile) LF Linear and Slot Diffusers Mounting Style 2 (Ceiling/Sidewall) LS Mounting Style 1 (Ceiling) LS BAR STYLES Note: Quantity of bars = 2 x listed width less 2. Example: 4" listed width = 4" x 2 = 8 less 2 = 6 bars.
Linear and Slot Diffusers L Series Single-Leaf Damper Option • Aluminum construction • Leaf type for sizes 1½" to 3" Note: Order with desired diffuser for attachment at factory. Linear and Slot Diffusers Cannot be used with hanger brackets. L Series G Grid Option • Aluminum construction • Individual adjustable blades • Cannot be used with hanger brackets Note: G Grid blades are assembled parallel to short dimension. Order with desired diffuser for factory fitting.
Linear and Slot Diffusers MARGIN STYLE SLOT S Series Slot Diffusers DIFFUSER ONLY with Hanger Bracket with No. 2 Standard Mounting Style 0 Mounting Style 1 Mounting Plaster Frame BO B1 B2 EO E1 E2 with No. 3 Wall-Mounting Plaster Frame B3 1" ¾" ½" End Cap Wall-to-Wall Mounting Plaster Frame B4 1" ¾" ½" FO HOW TO ORDER S Number of slots 01 to 10 1" ¾" ½" End Cap LO 1" ¾" ½" Note: Narrow regress T-Bar ceiling only.
Linear and Slot Diffusers Damper Single-leaf dampers are furnished in each slot opening throughout the entire diffuser length when specified. Dampers are fastened to the margin and are spring-loaded to hold their setting at all duct pressures. They are face-operated with a removable operator. Multiple dampers are furnished for grille lengths over 24 inches. Linear and Slot Diffusers Dampers are part of the S Series and are not specified separately.
Linear and Slot Diffusers STYLE B0 STYLE B1 Also for T-Bar applications Duct width equals overall width. * *Overall width is only 5/16" greater than the duct width. STYLE B3/B4 STYLE B2 Linear and Slot Diffusers Order 22¾" or 46¾" lengths with End Caps.
Linear and Slot Diffusers STYLE E1 STYLE E0/F0 Also for T-Bar applications Linear and Slot Diffusers For E0, order 22" and 46" lengths with End Caps.
Linear and Slot Diffusers S Series Mitered Corners Mitered Corner Sections Order as: S 90 FINISH SA - Satin Anodized W - Painted White NO. OF SLOTS 01 - 10 TYPE 50 - ½" Slot 75 - ¾" Slot 10 - 1" Slot Mitered corners are furnished in style #4 (with pattern controller and damper). When viewed from the room side, the mitered corner section appears identical to the butting straight sections. Plaster frame mitered corners can be specified with the outlet mitered corner.
Louvers DL Drum Louver Louvers • All-aluminum construction • Horizontal and vertical air stream control • Galvanized opposed-blade damper (optional) • Adjustable drum and vane design • White or Mill finish 82 Drum Louver Available Sizes 6" x 12", 6" x 18", 6" 10" x 20", 10" x 25", 10" 12" x 30", 12" 15" x 30", 15" x x x x 24", 6" x 30", 6" x 48", 6" x 60" 30", 10" x 35", 10" x 40", 10" x 50" 40", 12" x 50", 12" x 70" 50", 15" x 60", 15" x 70" Order H x W Duct Opening Sizing Listed Height Size Duct
Louvers BV Brick/Block Vent • Extruded aluminum construction • Standard masonry size • Maximum water protection • 6063-T5 extruded aluminum alloy • 18 x 16 mesh aluminum insect screen standard • 4" or 8" standard depth • Satin Anodized finish Note: To order specify Model, Depth, Finish Example: BV168 8 SA DIMENSIONS/FREE AREA BV Model JUMBO BRICK MODULAR BLOCK B Height Inches Free Area Sq. Ft. 802 ONE BRICK 8 21/2 .01 805 TWO BRICK 8 43/4 .06 162 TWO BRICK 163/8 21/2 .
Louvers 1530ZC Stationary Louver • • • • • • Extruded aluminum construction Fixed Z blade louver Blades at 30-degree angle 1½" louver depth Channel frame Available with bird screen or insect screen • Mill finish standard 1530ZC Shown 1530ZF Stationary Louver • • • • • • Louvers Extruded aluminum construction Fixed Z blade louver Blades at 30-degree angle 1½" louver depth Flange frame Available with bird screen or insect screen • Mill finish standard 1545ZC Stationary Louver • • • • • • Extruded alumin
Louvers 245ZC Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2" louver depth Channel frame Available with bird screen or insect screen • Mill finish standard 245ZF Stationary Louver 245ZF Shown • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2" louver depth Flange frame Available with bird screen or insect screen • Mill finish standard • • • • • • Extruded aluminum construction Fixed-blade louver Blades
