Brochure

ManualsBrandsHart & Cooley ManualsAluminum Egg Crate Return Air Grilles46" x 22" Aluminum Egg Crate Return Grille (RE5TI Series)

Commercial

Grilles, Registers & Diffusers

Edition 7

Summary of content (128 pages)

PAGE 1
Commercial Grilles, Registers & Diffusers Edition 7
PAGE 2
Hart & Cooley Inc 5030 Corporate Exchange Blvd. SE Grand Rapids, MI 49512 P (800) 433-6341 F (800) 223-8461 hartandcooley.com Checkout our new website! hartandcooley.
PAGE 3
Table of Contents Product Information Engineering Data REGISTERS & GRILLES—STEEL 800 Series Curved Blade Steel One Through Four-Way........................................................5 821 Vertical Single Deflection, w/MS...........................................................................6......................... 77 831 Horizontal Single Deflection, w/MS......................................................................6......................... 77 92HVO Double Deflection Horizontal Face...
PAGE 4
Table of Contents Table of Contents LIGHT COMMERCIAL Product Information Engineering Data CEILING DIFFUSERS—STEEL 20 Round Adjustable...............................................................................................28......................... 86 18 Duct Ring............................................................................................................28 19 Round OB Damper.............................................................................................
PAGE 5
Table of Contents Product Information Engineering Data T-BAR CONSTRUCTION FEATURES”.........................................................................................52 T-BAR RETURN 659T 659TI 673T 673TPI R6 96AFBT 96AFBTI RHF45T RCBFT REF5T REF5TI PFT PFTI AIR FILTER GRILLES Steel—Lanced Face...........................................................................................53....................... 112 Steel—Lanced Face with Fiberglass Back..................................................
PAGE 6
Table of Contents Table of Contents T-BAR GRILLES & DIFFUSERS Product Information FBR SBP RFPS RFPR PDS/PDSD PDR PD PDF Engineering Data Steel—Stamped Curved Blade..........................................................................65 Steel—Perforated Face Shallow Back...............................................................65....................... 114 Steel—Perforated Face with Directional Deflector.............................................66.......................
PAGE 7
Registers & Grilles - Steel 800 Series Steel construction Curved Blade design 1 - 4-way or 2-way corner air diffusion Available with or without damper Damper options: Multi-Shutter or Opposed Blade Individually adjustable bars for easy positive setting Opposed Blade damper is screwdriver operated Bright White finish Registers & Grilles - Steel • • • • • • • • 800 Series Available Sizes (in.
PAGE 8
Registers & Grilles - Steel 821 Registers & Grilles - Steel • All-steel construction • Vertical adjustable face bars • Horizontal multi-shutter valve • Bright White finish HT 4 5 6 8 10 12 14 16 18 20 24 6 X 8 X X X X HT Note: Screw hole location details on page 117 831 • • • • • • All-steel construction Horizontal adjustable face bars Vertical valve Adjustable multi-shutter valve Bright White finish 3/4” fin spacing Note: Screw hole location details on page 117 6 821 Available Sizes (in.
PAGE 9
Registers & Grilles - Steel 5 6 8 10 12 14 16 18 20 24 X X X X X X X 92HVO Register • • • • • X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X All-steel construction 831 Available Sizes (in.) AdjustableHT face bars may be setWIDTH to any desired deflection 8 10 12 14 16 20 24 30 32 36 Horizontal front bars 821 Available Sizes (in.
PAGE 10
36 X 92HVO Available Sizes (in.) 92HVV Available Sizes (in.
PAGE 11
36 X 92VHO Available Sizes (in.) 92VHV Available Sizes (in.
PAGE 12
Registers & Grilles - Steel 94A Grille (No Damper) Registers & Grilles - Steel • All-steel construction • 3/4” spaced fins set at 35°, horizontal face bars set at 35° • Larger sizes available in multiplepiece construction • Also available as 94AT T-Bar Return Grille (see page 57) • Bright White finish 94A Available Sizes (in.
PAGE 13
HT Registers & Grilles - Steel 98VOH Ventilation Register • Bright White finish HT 10 12 14 16 X X X X 10 6 X 8 X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 X X 12 X X X X X X X X X 14 X X X X X 16 X X X X X X X WIDTH 18 20 X X X X X X X X X X X 24 X X X X X X X 25 X X X 30 X X X X X X 36 X X X X X X 98VOH Available Sizes (in.
PAGE 14
Registers & Grilles - Aluminum HX Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Horizontal front bars • Single row of individually adjustable horizontal face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 117 HD Register • Extruded aluminum construction • Single row of individually adjustable horizontal face bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Sati
PAGE 15
Registers & Grilles - Aluminum 4 X X X X 6 X X X X 8 X X X X 10 6 X 8 X 10 X 12 X 14 X HM Register • • • • • HT Note: Screw hole location details on page 117 6 4 X 5 X 6 X 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 8 X X X X 10 12 X HT X X X 4 X X 5 X X 6 X X 8 X 14 X6 X X X X X X X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 X X X X X 40 X X XX XX XX XX XX XX XX X XX XX XX XX XX 30X 32X34X36 X 38 X X X X X XX XX X XX XX XX XX X XX XX XX XX X XX XX XX XX X XX XX XX XX X XX
PAGE 16
Registers & Grilles - Aluminum HVD Register Registers & Grilles - Aluminum • • • • • Extruded aluminum construction Two rows of individually adjustable face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized finish Note: Screw hole location details on page 117 14 HVD Available Sizes (in.
PAGE 17
40 42 44 46 48 Registers & Grilles - Aluminum VD Register Note: Screw hole location details on VM Register Note: Screw hole location details on page 117 HT 6 8 10 4 X X X 5 X X X 6 X X X 8 X X 10 X 12 14 16 18 20 22 24 26 28 30 32 34 36 VM Available Sizes (in.
PAGE 18
Registers & Grilles - Aluminum VH Register Registers & Grilles - Aluminum • • • • • • Extruded aluminum construction Vertical front bars Horizontal second bars Two rows of individually adjustable face bars for horizontal and vertical deflection Pivoted bars for easy positive setting Bright White or Satin Anodized finish HT 44 X X X X X X X X X X X X X X X X X X X X X X 46 X X X X X X X X X X X X X X X X X X X X X X X 48 X X X X X X X X X X X X X X X X X X X X X X X X 36 38 40 42 44 4 X X X X X X X X
PAGE 19
Registers & Grilles - Aluminum CH 1 Grille • • • • • Extruded aluminum construction One-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Bright White or Satin Anodized finish CHD1 Register • • • • • • Extruded aluminum construction One-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized finish Note: Screw hole location details on page 117 CHM1 Register • • • •
PAGE 20
Registers & Grilles - Aluminum CH2 Grille Registers & Grilles - Aluminum • • • • • Extruded aluminum construction Two-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Bright White or Satin Anodized finish Note: Screw hole location details on page 117 CHD2 Register • • • • • • Extruded aluminum construction Two-way deflection Individually adjustable curved-face bars Pivoted bars for easy positive setting Opposed-blade damper Bright White or Satin Anodized f
PAGE 21
Registers & Grilles - Aluminum C3 Grille Note: Screw hole location details on page 117 CD3 Register • Extruded aluminum construction • Three-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized finish Note: Screw hole location details on page 117 CM3 Register • Extruded aluminum construction • Three-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Mu
PAGE 22
Registers & Grilles - Aluminum C4 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Four-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish Note: Screw hole location details on page 117 CD4 Register • Extruded aluminum construction • Four-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Opposed-blade damper • Bright White or Satin Anodized fi
PAGE 23
Registers & Grilles - Aluminum CH2CL Grille Note: Screw hole location details on page 117 CH2CR Grille • Extruded aluminum construction • Two-way deflection • Individually adjustable curved-face bars • Pivoted bars for easy positive setting • Bright White or Satin Anodized finish HT 6 6 X HT 8 6 106 X 128 10 14 12 16 14 18 16 20 18 22 20 24 22 26 24 28 26 30 28 32 30 34 32 36 34 36 Other X X X X X X X 8 X 8 X X X 10 X 10 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
PAGE 24
Registers & Grilles - Aluminum RCB Grille RCBD Register Registers & Grilles - Aluminum • • • • Extruded aluminum construction Curved blades fixed on one-inch spacing Opposed-blade damper Bright White or Satin Anodized finish HT Blades at 40° angle 6 8 10 12 14 38 40 42 44 46 48 4 X X X X X X X X X X X 5 X X X X X X X X X X X 6 X X X X X X X X X X X 8 X X X X X X X X X X X 10 X X X X X X X X X 12 X X X X X X X X 14 X X X X X X X 16 X X X X X X 18 X X X X X X 20 X X X X X X 22 X X X X X X 24 X X X X X X
PAGE 25
Registers & Grilles - Aluminum RE5 Grille • • • • X X X X X X X X X X X X X X X X X 48 XX XX XX XX XX X X X X X Registers & Grilles - Aluminum 6 X X X X X X X X XX XX X XX XX XX XX XX XX XX XX XX XX XX 22 8 X X X X X X X X XX X XX XX XX XX XX XX XX XX XX XX XX 24 10 X X X X X X X X X XX XX XX XX XX XX XX XX XX XX XX 26 12 X X X X X X X XX XX XX XX XX XX XX XX XX XX XX 28 14 X X X X X X X X XX XX XX XX XX XX XX XX XX XX 30 16 X X X X X X X X XX XX XX XX XX XX XX XX XX 32 18 X X X X X X X XX XX XX XX XX XX
PAGE 26
Registers & Grilles - Aluminum REF5 Filter Grille, Grid Core Registers & Grilles - Aluminum • • • • • • All-aluminum construction 1/2” x 1/2” x 1/2” square core design Accommodates standard 1” thick disposable filter (not included) Filter grilles equipped with quarter turn fasteners Bright White or Mill finish Specify REF52 for 2” filter HT 6 8 10 12 4 X X X X 5 X X X X 6 X X X X 8 X X X 10 X X 12 X 14 16 18 20 22 24 25 26 28 30 32 34 36 HT 4 6 8 10 12 4 X X X X X 5 X X X X X 6 X X X X X 8 X X X X X
PAGE 27
REF5 Available Sizes (in.) WIDTH 6 8 10 12 14 16 18 20 22 24 25 26 28 30 32 34 36 4 X X X X X X X X X X X X X X X X 5 X X X X X X X X X X X X X X X X 6 X X X X X X X X Available X X SizesX (in.
PAGE 28
Registers & Grilles - Aluminum RH90 Grille Registers & Grilles - Aluminum • Extruded aluminum construction • Face bars permanently fixed into heavy aluminum frames at a 90-degree angle from face • Bright White or Satin Anodized finish HT 40 42 44 46 48 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X RH90 Available Sizes (in.
PAGE 29
Registers & Grilles - Aluminum TG Transfer Grille • • • • • TGF Transfer Grille Frame HT 6 8 10 12 14 16 4 X X X X X X 5 X X X X X X 6 X X X X X X 8 X X X X X 10 X X X X 12 X X X 14 X X 16 X 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 RHD90 Available Sizes (in.
PAGE 30
Ceiling Diffusers - Steel Ceiling Diffusers - Steel 20 Round Diffuser Listed Size 6 Ceiling Opening Diameter 11 • Steel construction • For ceiling or exposed duct installation • Five-step positioning of air pattern adjustment • 360-degree pattern, horizontal to vertical pattern change • Removable center core • Diffuser outer shell fastens directly to duct or to optional #18 duct ring; margins fit tight to ceiling for optimum 20 Available Sizes (in.
PAGE 31
Ceiling Diffusers - Steel 24 Square Ceiling Diffuser • All-steel construction • Step-down face deflects air stream 360 degrees • Bright White finish Only available in sizes shown. • All-steel construction • Golden Sand enamel finish • Used but not furnished with #24 ceiling diffusers. Ceiling Diffusers - Steel 21 Installation Frame 24 Ceiling Diffuser (in.) Free Area No. of Size Sq. Inches Cones 6 41 3 8 65 3 10 84 3 12 123 4 14 152 4 16 199 5 18 236 5 20 293 6 22 338 6 24 404 7 21 Available Sizes (in.
PAGE 32
Ceiling Diffusers - Steel SRE Diffuser • • • • Steel construction Removable core Flat (extended) margin style Optional factory-mounted, opposedblade damper available as SRED • Bright White enamel finish Ceiling Diffusers - Steel See page 34 for available air patterns.
PAGE 33
Ceiling Diffusers - Steel SR6 Control Grid • • • • Steel construction Field-mounts on diffuser Used to control airflow at the diffuser Mill finish • • • • Steel construction Used to control airflow at the diffuser Mill finish Duct-mount only 15 18 21 24 X X X X X X X X X X X X X X X X SRE Available Sizes X (in.) X X WIDTH X X 6 9 12 15 18 21 24 X X X X X X X X X X X X SR6 Available SizesX (in.
PAGE 34
Ceiling Diffusers - Aluminum ARE Diffuser Ceiling Diffusers - Aluminum • Extruded aluminum construction • Removable core • Flat (extended) margin style • Optional factory-mounted aluminum opposed-blade damper available as ARED • Bright White or Satin Anodized finish See page 34 for available air patterns.
PAGE 35
Ceiling Diffusers - Aluminum 15 18 21 24 27 30 33 36 X ARS Diffuser See page 34 for available air patterns.
PAGE 36
Ceiling Diffusers - Steel/Aluminum Neck View Type SR & AR Air Patterns Style Listed Sizes 6x6 9x9 12x12 15x15 18x18 21x21 Ceiling Diffusers - Steel/Aluminum STYLE 4 24 x 24 Max. in Steel 9x6 to 36x6 12x9 to 36x9 15x12 to 36x12 18x15 to 36x15 21x18 to 36x18 STYLE 3S 24 x 21 Max.
PAGE 37
Ceiling Diffusers - Aluminum ASRE Diffuser • Extruded aluminum construction • Flat (extended) margins overlap opening • For use with roof-mounted installations • Removable core • Return damper available - AR7 • Supply damper available - AS7 ASRS Diffuser • Extruded aluminum construction • Step-down (beveled) margins overlap opening and lowers the diffuser from the ceiling • For use with roof-mounted installations • Removable core • Bright White or Satin Anodized finish • Return damper available - AR7 • Sup
PAGE 38
Ceiling Diffusers - Aluminum MCD Adjustable Modular Diffuser MCD Available Sizes (in.) 6” x 6”, 8” x 8”, 10” x 10”, 12” x 12”, 14” x 14”, 16” x 16”, 18” x 18”, 20” x 20”, 22” x 22” Ceiling Diffusers - Aluminum • Extruded aluminum construction • Four modular cores provide variable pattern adjustments of four-way, three-way, twoway, or one-way horizontal air patterns • Flat (extended) margin • Fixed fins • Bright White finish MCDD Adjustable Modular Diffuser MCDD Available Sizes (in.
PAGE 39
Ceiling Diffusers - Aluminum MCDSD Adjustable Modular Diffuser MCDSD Available Sizes (in.
PAGE 40
Spiral Diffusers Model SV Single-Deflection Diffuser Spiral Diffusers (Shown with scoop) Size restrictions apply. See price list for sizes and ordering information.
PAGE 41
Spiral Diffusers Model USVH Double Deflection Universal Diffuser Size restrictions apply. See price list for sizes and ordering information. USVH Available Sizes (in.) 10” x 3” to 36” x 12” Model SS Slot Face Diffuser Size restrictions apply. See price list for sizes and ordering information. SS Available Sizes (in.) One to four slots wide up to 48” long • Extruded aluminum construction • Slot sizes available: 1/2’’, 3/4’’, 1’’ • Optional face adjustable scoop to direct airflow.
PAGE 42
Linear and Slot Diffusers Linear and Slot Diffusers LS/LF Series Diffuser Minimum width 1-1/2” Note: Floor application must be ordered as “LF.” Eight-inch maximum width for constant traffic; 12” maximum width for occasional traffic; maximum length 72”.
PAGE 43
Linear and Slot Diffusers L Series - Dimensional Data Mounting Style 0 (Floor/Sill) LF Mounting Style 1 (Ceiling) LS Mounting Style GO Mounting Style 00 (Bars Only) Linear and Slot Diffusers Mounting Style 3 Mounting Style 2 (Ceiling/Sidewall) LS 00 Bar Style Only w/o Mounted Damper or Control Grid (Ceiling/Sidewall) LS (Concrete/Tile) LF BAR STYLES Note: Quantity of bars = 2 x listed width minus 2. Example: 4” listed width = 4” x 2 = 8 minus 2 = 6 bars.
PAGE 44
Linear and Slot Diffusers L Series Single-Leaf Damper Option • Aluminum construction • Leaf type for sizes 11/2” to 3” Note: Order with desired diffuser for attachment at factory. Linear and Slot Diffusers Cannot be used with hanger brackets. L Series G Grid Option • Aluminum construction • Individual adjustable blades • Cannot be used with hanger brackets Note: G Grid blades are assembled parallel to short dimension. Order with desired diffuser for factory fitting.
PAGE 45
Linear and Slot Diffusers MARGIN Style SLOT S Series Slot Diffusers DIFFUSER ONLY with Hanger Bracket with No. 2 Standard Mounting Style 0 Mounting Style 1 Mounting Plaster Frame BO B1 B2 EO E1 E2 with No. 3 Wall-Mounting Plaster Frame B3 1” / 1 /2 ” 3 4” with No. 4 Wall-to-Wall Mounting Plaster Frame B4 1” / 1 /2 ” 3 4” FO HOW TO ORDER S Number of slots 01 to 10 1” 3 /4 ” / 1 2” End Cap LO 1” / 1 /2 ” 3 4” Note: Narrow regress T-Bar ceiling only.
PAGE 46
Linear and Slot Diffusers Damper Single-leaf dampers are furnished in each slot opening throughout the entire diffuser length when specified. Dampers are fastened to the margin and are spring-loaded to hold their setting at all duct pressures. Multiple dampers are furnished for grille lengths over 24 inches. Linear and Slot Diffusers Dampers are part of the S Series and are not specified separately.
PAGE 47
Linear and Slot Diffusers STYLE B0 STYLE B1 Also for T-Bar applications Linear and Slot Diffusers Order 223/4” or 463/4” lengths with End Caps. Duct width equals overall width. * *Overall width is only 5/16” greater than the duct width.
PAGE 48
Linear and Slot Diffusers STYLE E1 STYLE E0/F0 Also for T-Bar applications Linear and Slot Diffusers For E0, order 22” and 46” lengths with End Caps.
PAGE 49
Linear and Slot Diffusers S Series Mitered Corners Mitered Corner Sections Order as: S 90-degree mitered corners are available as factory-fabricated section. Precise factory cutting and assembly reduces field fabrication time and assures proper fit. Corner sections are furnished and blanked off. Corner sections butt to adjacent straight sections, which are spliced together with aligning keys. 90 Finish SA - Satin Anodized W - Painted White NO.
PAGE 50
Louvers DL Drum Louver Louvers • All-aluminum construction • Horizontal and vertical air stream control • Galvanized, opposedblade damper (optional) • Adjustable drum and vane design • White or Mill finish Drum Louver Available Sizes 6” x 12”, 6” x 18”, 6” x 24”, 6” x 30”, 6” x 48”, 6” x 60” 10” x 20”, 10” x 25”, 10” x 30”, 10” x 35”, 10” x 40”, 10” x 50” 12” x 30”, 12” x 40”, 12” x 50”, 12” x 70” 15” x 30”, 15” x 50”, 15” x 60”, 15” x 70” Order H x W Duct Opening Sizing Listed Height Size Duct Openi
PAGE 51
Louvers BV Brick/Block Vent • Extruded aluminum construction • Standard masonry size • Maximum water protection • 6063-T5 extruded aluminum alloy • 18 x 16 mesh aluminum insect screen standard • 4” standard depth • Satin Anodized finish Note: To order specify Model, Depth, Finish Example: BV168 4 SA DIMENSIONS/FREE AREA STANDARD BRICK JUMBO BRICK MODULAR BLOCK Masonry Opening Size A B Width Inches Height Inches Free Area Sq. Ft. 802 ONE BRICK 8 2 1/ 2 .01 805 TWO BRICK 8 4 3/ 4 .
PAGE 52
Louvers 4ABC Adjustable Louver • • • • • • • • Extruded aluminum construction Adjustable baffle blades on 4” centers 4” louver depth Channel frame Max.
PAGE 53
Louvers 245ZC Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2” louver depth Channel frame Available with bird screen or insect screen • Mill finish standard 245ZF Shown 245ZF Stationary Louver • • • • • • Extruded aluminum construction Fixed-blade louver Blades at 45-degree angle 2” louver depth Flange frame Available with bird screen or insect screen • Mill finish standard Louvers 445ZC Stationary Louver • • • • • • Extrude
PAGE 54
T-Bar Construction Features T-Bar Construction Features Our popular supply and return products for T-Bar A unique modular collar system provides a standard ceilings are an innovative response to the challenge of collar and damper unit, which can be shared between creating a better indoor environment. T-Bar products a number of different T-Bar products.
PAGE 55
659T Steel Lanced Filter Grille T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 659T Available Sizes 20” x 20” with extended frame (overall 233/4” x 233/4”) for 24” x 24” openings 44” x 20” with extended frame (overall 473/4” x 233/4”) for 48”x24” opening • Steel construction • Lanced-face design with 1/3” blade spacing • Flush, removable face with concealed latches and hinges can be installed in any direction • Uses standard 1” disposable filters (not furnished) • Bright White finish 65
PAGE 56
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 673TPI R6 Steel Filter Grille 673TPI R6 Available Size 20” x 20”, overall 233/4” x 233/4” • Steel construction • Lanced-face design with 1/2” blade spacing • Flush, face with screwdriver latches and piano hinges can be installed in any direction • Plenum box with R6 insulated ductboard • Uses standard 1” disposable filters (not furnished) • Bright White finish Molded Fiberglass Back R4.
PAGE 57
96AFBTI Steel Fixed-Bar Filter Grille with Fiberglass Back See page 54 for fiberglass specifications. T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles 96AFBTI Available Size 20” x 20”, overall 233/4” x 233/4” • Steel construction • Bar-style face design • Flush, removable face with concealed latches and hinges, can be installed in any direction • R4.
PAGE 58
T-Bar Return-Air Filter Grilles T-Bar Return-Air Filter Grilles REF5T/REF5TI Aluminum Egg Crate Filter Grille REF5T/ REF5TI REF5T only Available Sizes 20” x 20” with extended frame (overall 233/4” x 233/4” ) for 24” x 24” openings 44” x 20” with extended frame (overall 473/4” x 233/4”) for 48” x 24” openings • Aluminum and steel construction • Egg crate style face • Hinged to filter frame • Mount flush with T-Bar ceilings • REF5T with thumb screw fasteners, REF5TI with cam lock • Uses standard 1” dispo
PAGE 59
T-Bar Return-Air Grilles 94AT Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 46” x 22” (overall 473/4” x 233/4”) for 48” x 24” openings T-Bar Return-Air Grilles 94AT Steel Bar-Style Return Grille Engineering Data not available • Steel construction • Mount flush with T-Bar ceilings • Bright White finish RH45T Aluminum Bar-Style Return Grille RH45T Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 46” x 22” (overall 473/4” x 233/4”) for 48” x 24” open
PAGE 60
T-Bar Return-Air Grilles T-Bar Return-Air Grilles RE5T Aluminum Egg Crate Return Grille • • • • RE5T Available Sizes 22” x 22” (overall 233/4” x 233/4” ) for 24” x24” openings 22” x 46” (overall 473/4” x 233/4”) for 48” x 24” openings All aluminum construction Egg crate style face Mount flush with T-Bar ceilings Bright White or Mill Aluminum finish RE5TI Aluminum Egg Crate Return Grille with Insulated Back RE5TI Available Size grid core face 1/2” x 1/2” x 1/2” • • • • All aluminum construction Egg cr
PAGE 61
444 SurfAire® Aluminum Face Renovator Series Diffuser T-Bar Surfaire/Renovator Diffusers T-Bar Surfaire/Renovator Diffusers 444 Available Size overall size 233/4” x 233/4” • Aluminum face • Unique deflector apertures • Air distributed in thin layers along ceiling surface allowing optimum mixing of conditioned air • Formed galvanized steel back panel • Frame includes four seismic safety connections • Back plate covered with glass fiber insulation to reduce condensation • Aluminum foil vapor barrier protec
PAGE 62
8 HT 2 4 HT T-Bar Rezzin Diffusers T-Bar Rezzin Diffusers RZSRT Plastic T-Bar Directional Diffuser • Engineered polymer construction • Four-way deflection • Available with RZSR square-to-round, ordered separately • Bright White finish • Contains metal screws RZMCDST Plastic T-Bar Modular Core Diffuser • Engineered polymer construction • Modular cores provide one, two, three, or fourway horizontal air patterns • Removable modules provide easy access to accessories • Available with RZBP back panel, ordere
PAGE 63
HT T-Bar Rezzin Diffusers 4 6 8 RZ500 Plastic Square Ceiling Diffuser Engineered polymer construction 12”x12” face 6”, 7” and 8” collars included Ratcheting cam lock–install without screws Removable core and integral damper Available in 4-way, 3-way and 2-way corner • Bright White finish • Contains metal parts T-Bar Backer Plate or Rafter Rough-In Plate Available 4 6 8 HT 6 8 10 12 RZ500 Available Available Sizes Size (in.) RZ683 (in.) 12WIDTH x 12 8 10 12 14 RZ16 Available Size (in.
PAGE 64
T-Bar Fixed-Pattern/Perforated Supply Diffusers T-Bar Fixed-Pattern Diffusers HVS/HVS R6 Steel High-Volume Supply • • • • • • • • • • • • Steel construction Provides high air volume delivery 360-degree air diffusion Formed back panel Fixed core Fiberglass insulation blanket with foil vapor HVS Shown barrier to minimize condensation on HVS Insulation prescored to accommodate collar size desired R6 molded fiberglass back on HVS R6; use 5400 with 5400PP Accepts unique 2” high snap-in collar (5400 series) (6”
PAGE 65
T-Bar Fixed-Pattern Perforated Supply Diffusers DPD/DPD R6 Available Sizes 6” 8” 10” 12” 14” T-Bar Fixed-Pattern Diffusers DPD/DPD R6 Steel T-Bar Plate Diffuser • Aesthetically appealing, single-face plate design • 360° air diffusion pattern • Detachable face plate • 2” fixed collar • Optional R6 insulated back (DPD R6) • White finish RENPS/ARENPS RENPS R6 Steel/Aluminum Perforated Supply Diffuser with Insulated Back See page 54 for fiberglass specifications.
PAGE 66
T-Bar Perforated Supply/Return T-Bar Perforated Supply/Return CBPS/CBPR Steel Curved-Blade Perforated Supply/Return CBPS Curved-Blade Perforated Supply • Steel construction • Removable, hinged face allows for easy access to air pattern control core • Individually adjustable pattern deflectors factory-set at 4-way deflection; can be field-adjusted for 1, 2, 3-way air patterns • Available in 6”, 8”, 10”, 12”, 14” and 16” diameter necks • Unique 2” high collar permits easy flex connections • Accepts 3800 S
PAGE 67
T-Bar Perforated Supply/Return FBCS Flat Back Perforated Supply FBR Flat Back Return FBCS/FBR Available Size Overall Size 233/4” x 233/4” Engineering Data not available T-Bar Perforated Supply/Return FBCS/FBR Steel Flat Back Perforated Supply/Return Diffuser • Supply diffuser with 4-way deflector • Return without deflector • 1” thick fiberglass back with foil vapor barrier • Back with preprinted template accepts 6” to 18” spin collar or unique tab collar (6400 series 6”-14”), 5400 6”-18” with 5400PP •
PAGE 68
T-Bar Perforated Supply/Return T-Bar Perforated Supply/Return RFPS/RFPR Steel Removable Face Perforated Supply/Return RFPS/RFPR Available Size Overall Size 233/4” x 233/4” • Steel construction • Removable hinged face for easy access to deflectors • Face can be removed for cleaning • Patented adjustable deflectors provide various directional patterns • Formed steel black back panel RFPS Removable Face Perforated Supply • Accepts 6” through 12” round snap in U.S. Pat. No.
PAGE 69
T-Bar Perforated Supply/Return PDSD Available Size Overall Size 233/4” x 233/4” PDR Steel Perforated Return Grille PDR Available Size Overall Size 233/4” x 233/4” T-Bar Perforated Supply/Return PDSD Steel Perforated Diffuser Supply (with adjustable deflector) • Perforated steel face • Face adjustable deflectors • Formed steel, black back panel • Fiberglass insulation blanket with foil vapor barrier to minimize condensation • Insulation prescored to accommodate collar size desired • Accepts unique snap-
PAGE 70
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser ART ART Available Sizes 6” x 6”, 9” x 9”, 12” x 12”, 15” x 15”, 21” x 21” Aluminum Note: For 18” x 18” neck, order ARE 18” x 18”. Square and Rectangular T-Bar Diffusers • Aluminum construction • Available in one, two, three and four-way deflections • Removable core • Bright White or Satin Anodized finish SRT SRT Available Sizes 6” x 6”, 9” x 9”, 12” x 12”, 15” x 15” Steel Note: For 18” x 18” neck, order SRE 18” x 18”.
PAGE 71
T-Bar Directional/Modular Diffuser MCDST/MCDSTSR Available Sizes 6” x 6”, 8” x 8”, 10” x 10”, 12” x 12”, 14” x 14”, 16” x 16”, 18” x 18”, 20” x 20” T-Bar Directional/Modular Diffuser MCDST Aluminum Modular Core Diffuser • Extruded aluminum diffuser in aluminum panel • Modular cores provide one, two, three, and four-way air patterns • Removable modules provide easy access to duct-mounted damper • Available in 6” to 20” • Available as MCDSTSR with square-to-round transition attached • Bright White finish MC
PAGE 72
T-Bar Directional/Modular Diffuser T-Bar Directional/Modular Diffuser A500P Steel T-Bar Panel for A500 Series Diffusers A504MS/A504OB Four-way deflection A500P T-Bar Panel Available Size Opening 6” to 14” Overall 233/4” x 233/4” • Adapts A500 diffuser to T-Bar installation • Diffuser snaps in behind panel for clean appearance • Steel panel • Diffuser must be ordered separately • Bright White finish • Diffuser sizes 6”x6” to 14”x14” OB Damper A501MS/A501OB One-way deflection A502MS/A502OB Two-way def
PAGE 73
T-Bar Accessories 6400 Tab Collar 6” • Galvanized steel construction • For use with fiberglassbacked ceiling diffusers • Tabbed for easy installation • Accepts 3800 Series damper T-Bar Accessories 5400 Series Collar Ring* 6400 Series Available Sizes 8” 10” 12” 14” 5400 Series Available Sizes 6” 7” 8” 9” 10” 12” 14”* 16” 18” • Unique snap-in design for easy installation • 2” high collar permits easy flex connections • Bead on collar improves the strength and provides retention for flexible duct connect
PAGE 74
T-Bar Accessories T19 Series Damper • Multi-blade damper • Tabs for easy installation • For use with 5400 Series collar • Bright White finish Note: 3/16 hex operator by 6” 19 Series Available Sizes 8” 10” 12” 14” 16” T-Bar Accessories others RD Radial Damper 6” • Galvanized steel construction • Face-adjustable • For use with round neck diffusers • Mill finish SMF Aluminum Surface Mount Frame RD Available Sizes 8” 10” 12” 14” SMF Available Sizes 12” x 12”, 24” x 12”, 24” x 24”, 24” x 48” • Alumin
PAGE 75
Miscellaneous P Filler Panel • Steel or aluminum construction • Available in 9 sizes from 12” x 12” to 36” x 36” in 12” increments P Filler Panel Available Sizes 12” x 12”, 24” x 12”, 36” x 12”, 48” x 12”, 24” x 24”, 36” x 24”, 48” x 24”, 36” x 36” • Bright White finish Diffusers are factory-installed (must order with diffuser).
PAGE 76
Miscellaneous DT Air Diverter • Extruded aluminum construction • Two sets of individually adjustable blades • Equalizes flow and controls volume at collar take-offs to registers and grilles • Equipped with gasket around outside of frame for positioning firmly in duct • Mill finish Miscellaneous FT Flexiturn • Extruded aluminum construction • Designed to pick up air from the main trunk at branch take-offs and divert it toward the grille • Mounts easily with sheet metal screws • Gang-operated blades move fr
PAGE 77
Engineering Data Engineering Data Data Using the Engineering ForUsing most of theEngineering models & sizes we’ve done the calculations for you. the Data CFM volume air flow&insizes cubicwe’ve feet per For= most of theofmodels doneminute the calculations for you. 421 300 400 500 600 700 800 .006 .010 .016 .022 .031 .040 50 4.5 70 5.0 85 6.5 100 7.5 120 9.0 135 10.0 4.0 6.0 8.0 10.0 11.0 12.5 Noise – an increase in face velocity will create more noise.
PAGE 78
Unlisted Sizes_Engineering Data When a size is not listed there are a couple ways to do an eng principles permit you to utilize existing sizes to determine size Engineering Data Sizing a Return Air volume going back to the air handler (fan) must equal what is supplied from the air handler. Therefore the total AFM capacity of the return grilles must equal or exceed the total CFM capacity of all the supply diffusers.
PAGE 79
Engineering Data 821, 831, 92 Series and 98VOH (Page 6-8, 11) Deflection C Deflection A 400 500 600 .010 .016 .022 65 80 100 6.5 8.0 10.0 80 100 120 7.0 9.0 11.0 100 120 145 8.0 10.0 12.0 115 145 170 8.5 11.0 13.0 125 155 190 9.0 11.0 14.0 125 155 190 9.0 11.0 14.0 145 185 220 10.0 12.0 15.0 150 190 225 10.0 12.0 15.0 170 210 250 11.0 13.0 16.0 180 220 265 11.0 13.0 16.0 205 255 305 12.0 15.0 17.0 210 265 315 12.0 15.0 18.0 255 315 380 13.0 16.0 19.0 255 320 385 13.0 16.0 19.0 310 385 465 14.0 18.0 21.
PAGE 80
Engineering Data 821, 831, 92 Series and 98VOH (Page 6-8, 11) Deflection G 2000 .249 250 18.0 315 20.0 380 22.0 445 24.0 485 25.0 490 26.0 570 28.0 590 28.0 650 29.0 690 30.0 790 32.0 815 33.0 965 36.0 995 36.0 1195 40.0 1345 42.0 1500 45.0 1620 46.0 2035 52.0 2045 52.0 2445 57.0 2470 57.0 2565 58.0 3085 64.0 3100 64.0 3730 70.0 Face Velocity Pressure Loss CFM 8x4 Throw Ak .119 CFM 10 x 4 Throw Ak .143 CFM 12 x 4 Throw Ak .173 CFM 14 x 4 Throw Ak .202 CFM 12 x 5 Throw Ak .220 CFM 10 x 6 Throw Ak .
PAGE 81
30 x 24 Ak 3.540 36 x 24 Ak 4.220 30 x 30 Ak 4.390 36 x 30 Ak 5.220 48 x 24 Ak 5.540 36 x 36 Ak 6.180 48 x 36 Ak 8.020 48 x 48 Ak 10.300 CFM Ps CFM Ps CFM Ps CFM Ps CFM Ps CFM Ps CFM Ps CFM Ps 1062 .007 1266 .008 1317 .008 1565 .010 1662 .011 1855 .012 2407 .012 3089 .012 1416 .011 1688 .013 1756 .013 2087 .015 2217 .016 2473 .017 3210 .024 4119 .024 1770 .021 2110 .024 2194 .024 2608 .029 2771 .030 3091 .034 4012 .034 5148 .034 Engineering Data 2124 .031 2532 .035 2633 .036 3130 .041 3325 .043 3709 .
PAGE 82
Engineering Data H and V Series (Page 12-16) Deflection C 400 500 600 700 .010 .016 .022 .031 60 80 95 110 6.5 8.0 10.0 12.0 80 100 120 140 7.5 9.5 12.0 13.0 95 120 145 170 8.0 10.0 12.0 14.0 115 140 170 195 9.0 11.0 13.0 15.0 125 155 185 215 9.0 12.0 14.0 16.0 125 155 190 220 9.0 12.0 14.0 16.0 145 180 220 255 10.0 12.0 15.0 18.0 150 190 225 265 10.0 13.0 15.0 18.0 165 210 250 295 11.0 13.0 16.0 19.0 180 225 270 310 11.0 14.0 17.0 19.0 205 255 305 360 11.0 14.0 17.0 20.0 210 265 315 370 12.0 15.0 18.0 21.
PAGE 83
Engineering Data H and V Series (Page 12-16) Deflection G Face Velocity Pressure Loss CFM 8x4 Throw Ak .118 CFM 10 x 4 Ak .149 Throw CFM 12 x 4 Ak .181 Throw CFM 14 x 4 Ak .212 Throw CFM 12 x 5 Ak .233 Throw CFM 10 x 6 Ak .236 Throw CFM 14 x 5 Ak .274 Throw CFM 12 x 6 Ak .286 Throw CFM 16 x 5 Ak .315 Throw CFM 14 x 6 Ak .336 Throw CFM 16 x 6 Ak .386 Throw CFM 20 x 5 Ak .397 Throw CFM 24 x 5 Ak .478 Throw CFM 20 x 6 Ak .486 Throw CFM 24 x 6 Ak .586 Throw CFM 20 x 8 Ak .665 Throw CFM 30 x 6 Ak .
PAGE 84
Engineering Data C Series Curved-Blade Diffusers Selection Procedure C Series Curved-Blade Diffusers (Page 17-21) One-Way, Two-Way Engineering Data 1. Determine the diffuser air pattern best suited to the duct layout and room area to be served. L L L Face Velocity Pressure Loss 2. Select the air pattern type and CFM per CFM 6x6 Ak .090 Throw 1/2 outlet. The tables give the recommended limits CFM 8x6 of air volume per outlet for various ceiling Ak .100 Throw 1/2 CFM 10 x 6 heights.
PAGE 85
Engineering Data L S C Series Three-Way L L S S S S L S S S C Series Four-Way L L 400 500 600 700 800 .010 .016 .022 .031 .040 35 45 55 65 70 9/13 11/17 15/20 17/24 18/26 2.0/2.0 2.5/3.0 3.0/3.5 3.5/4.0 4.0/4.5 40 50 60 70 80 18/11 24/13 28/16 32/19 36/22 2.5/2.0 3.0/2.5 3.5/3.0 4.5/3.5 5.0/4.0 60 75 90 105 120 22/19 27/24 32/29 39/33 44/38 3.0/2.5 3.5/3.0 4.5/4.0 5.0/4.5 6.0.5.0 65 80 95 110 130 31/17 36/22 43/26 50/30 60/35 3.5/2.5 4.0/3.5 5.0/4.0 5.5/4.5 7.0/5.
PAGE 86
Engineering Data Engineering Data RH45, RHD45, RHF45 Registers and Grilles (Page 24, 25) Face Velocity 6x6 CFM Ps Ak .110 CFM 8x8 Ps Ak .240 CFM 12 x 6 Ps Ak .280 CFM 14 x 6 Ps Ak .330 CFM 14 x 8 Ps Ak .460 CFM 12 x 12 Ps Ak .610 CFM 24 x 8 Ps Ak .840 CFM 18 x 12 Ps Ak .950 CFM 30 x 8 Ps Ak 1.070 CFM 24 x 12 Ps Ak 1.290 CFM 18 x 18 Ps Ak 1.460 CFM 30 x 12 Ps Ak 1.630 CFM 20 x 20 Ps Ak 1.820 CFM 36 x 12 Ps Ak 1.980 CFM 24 x 20 Ps Ak 2.210 CFM 30 x 18 Ps Ak 2.500 CFM 24 x 24 Ps Ak 2.
PAGE 87
Engineering Data RE5 Series Return Air Registers and Grilles (Page 23) RH90 Registers and Grilles (Page 26) 400 50 .012 103 .011 119 .011 141 .011 195 .011 256 .011 348 .010 395 .010 441 .010 535 .010 605 .010 676 .010 755 .010 818 .010 914 .010 1034 .010 1106 .009 1252 .009 1399 .009 1697 .009 1773 .009 2154 .009 2308 .009 2621 .009 3588 .009 4946 .008 500 63 .019 129 .018 148 .018 177 .018 244 .018 320 .017 435 .017 493 .016 552 .016 668 .016 756 .016 845 .016 943 .016 1023 .015 1142 .015 1292 .
PAGE 88
Engineering Data Engineering Data 20Round – Round Diffuser 20 Diffuser (Page 28) Engineering Data TG, TGF Transfer Grilles (Page 27) Face Velocity* CFM 8x8 Ak .440 Ps CFM 14 x 6 Ak .550 Ps CFM 12 x 8 Ak .640 Ps CFM 14 x 8 Ak .740 Ps CFM 20 x 6 Ak .780 Ps CFM 12 x 12 Ak .930 Ps CFM 30 x 6 Ak 1.120 Ps CFM 16 x 12 Ak 1.190 Ps CFM 18 x 12 Ak 1.330 Ps CFM 20 x 12 Ak 1.460 Ps CFM 16 x 16 Ak 1.540 Ps CFM 24 x 12 Ak 1.750 Ps CFM 18 x 18 Ak 1.950 Ps CFM 30 x 12 Ak 2.170 Ps CFM 20 x 20 Ak 2.420 Ps CFM 24 x 18 Ak 2.
PAGE 89
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Four-Way Square 500 .020 50 2-3/2-3 110 2-4/2-4 200 3-5/3-5 310 4-6/4-6 450 4-8/4-8 615 5-9/5-9 800 5-11/5-11 1010 6-12/6-12 1370 7-13/7-13 600 700 800 900 1000 1200 1400 .020 .030 .040 .050 .060 .090 .
PAGE 90
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Engineering Data Three-Way Style 3 Face Velocity Pressure Loss CFM 6x6 Ak .100 Throw X/Y CFM 9x9 Ak .220 Throw X/Y CFM 12 x 12 Ak .400 Throw X/Y CFM 15 x 15 Ak .620 Throw X/Y CFM 18 x 18 Ak .900 Throw X/Y CFM 21 x 21 Ak 1.230 Throw X/Y CFM 24 x 24 Ak 1.600 Throw X/Y CFM 27 x 27 Ak 2.020 Throw X/Y 500 .020 50 2-4/1-2 110 2-4/2-3 200 4-7/2-5 310 4-8/2-4 450 4-9/3-5 615 5-11/3-6 800 7-14/5-9 1010 7-13/4-9 600 .
PAGE 91
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Two-Way Corner Style 2C 900 .050 80 3-7/3-7 175 6-10/6-10 315 8-13/8-13 495 10-16/10-16 700 12-19/12-19 975 15-23/15-23 1270 17-27/17-27 1585 19-29/19-29 1000 .060 90 5-8/5-8 195 6-11/6-11 350 9-14/9-14 550 11-18/11-18 780 14-22/14-22 1080 17-28/17-28 1410 19-29/19-29 1760 21-33/21-33 1200 .
PAGE 92
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Engineering Data Two-Way Style 2L Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw Y CFM 12 x 6 Ak .170 Throw Y CFM 15 x 6 Ak .220 Throw Y CFM 12 x 9 Ak .260 Throw Y CFM 15 x 9 Ak .320 Throw Y CFM 18 x 9 Ak .390 Throw Y CFM 21 x 9 Ak .450 Throw Y CFM 15 x 12 Ak .430 Throw Y CFM 18 x 12 Ak .520 Throw Y CFM 21 x 15 Ak .760 Throw Y CFM 24 x 15 Ak .870 Throw Y CFM 21 x 18 Ak .910 Throw Y CFM 27 x 21 Ak 1.
PAGE 93
2-WAY STYLE 2L Engineering Data TY TY SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Two-Way Style 2 500 .020 45 3-5 95 5-7 175 4-7 275 8-12 390 9-15 540 11-17 705 12-19 880 12-20 600 .020 55 3-5 115 6-8 210 6-9 330 10-14 470 11-17 650 14-20 845 14-22 1055 15-23 700 .030 60 4-7 135 6-8 245 9-13 385 10-15 545 12-18 760 15-23 990 17-25 1230 18-26 800 .040 70 4-7 155 6-9 280 10-15 440 12-18 625 14-20 865 18-26 1130 20-30 1410 21-31 900 .
PAGE 94
Engineering Data SR/AR Square & Rectangular Ceiling Diffusers — Steel/Aluminum (Page 34) Engineering Data One-Way Style 1L Face Velocity Pressure Loss CFM 9x6 Ak .130 Throw CFM 12 x 6 Ak .170 Throw CFM 15 x 6 Ak .220 Throw CFM 12 x 9 Ak .260 Throw CFM 15 x 9 Ak .320 Throw CFM 18 x 9 Ak .390 Throw CFM 15 x 12 Ak .430 Throw CFM 18 x 12 Ak .520 Throw CFM 21 x 15 Ak .760 Throw CFM 24 x 15 Ak .870 Throw CFM 21 x 18 Ak .910 Throw CFM 27 x 21 Ak 1.380 Throw 500 .
PAGE 95
Engineering Data ASR Square Supply Return Diffuser — Aluminum (Page 35) Four-Way Square Face Velocity Pressure Loss 600 .020 700 .030 90 .01 2-4/2-4 <30 105 .02 2-4/2-4 <30 120 .02 3-5/3-5 <30 CFM 9x9 Grid Core -Ps NC Ak .340 65 <.01 <30 80 <.01 <30 90 <.01 <30 Face Velocity Pressure Loss 500 .020 600 .020 700 .030 200 .01 3-5/3-5 <30 240 .02 4-6/4-6 <30 280 .02 4-8/4-8 <30 150 .01 <30 180 .02 <30 210 .02 <30 500 .020 600 .020 700 .030 250 .01 3-5/3-5 <30 300 .02 4-6/4-6 <30 350 .
PAGE 96
Face Velocity Pressure Loss 500 .020 600 .020 Engineering Data CFM Ps Throw X/Y NC 24 x 24 Ak .700 CFM 18 x 18 Grid Core -Ps Ak 1.600 NC ASR Square 350 .01 3-5/3-5 <30 Supply 260 <.01 <30 Return 420 .02 3-7/3-7 <30 315 <.01 <30 Diffuser 700 .030 800 900 1000 .040 .050 .060 Supply Performance Data 490 560 630 700 .02 .03 .04 .05 4-7/4-7 4-9/4-9 5-11/5-11 5-11/5-11 <30 <30 <30 <30 Return Performance Data 365 420 470 525 <.01 <.01 <.01 <.01 <30 <30 <30 — Aluminum (Page 35)<30 1200 .090 1400 .
PAGE 97
Engineering Data TY 600 700 800 .020 .030 .
PAGE 98
NC CFM Throw NC CFM 16 x 16 Throw Ak .700 NC CFM 18 x 18 Throw Ak .900 NC CFM 20 x 20 Throw Ak 1.100 NC CFM 22 x 22 Throw Ak 1.330 NC <20 260 6-14 <20 350 8-16 <20 450 8-18 <20 555 10-20 <20 665 10-22 <20 <20 310 8-16 <20 420 10-18 <20 540 10-22 <20 665 12-24 <20 800 12-26 <20 <20 365 10-18 <20 490 10-22 <20 630 12-24 <20 775 14-28 <20 930 16-30 <20 500 .
PAGE 99
Engineering Data SS Spiral Diffuser (Page 39) See notes on next page and see page 39 for min. duct diameter. 1/2” wide slot–nonducted ½" wide slot - nonducted 7 10 13 17 20 1-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .002 7-4-2 <15 .003 11-6-4 <15 .006 15-7-5 <15 .009 19-9-6 <15 .016 22-11-7 <15 10 17 23 30 37 43 2-Slot Airflow Rate (CFM/Linear Foot) Static Pressure Horizontal Throw Noise Criteria .001 6-3-2 <15 .002 9-5-3 <15 .
PAGE 100
Engineering Data SS Spiral Diffuser (Page 39) Notes: Engineering Data 1. Tests conducted in accordance with ANSI/ASHRAE 70-1991 at isothermal conditions. 2. Engineering Units: Airflow Rate = CFM/linear foot Static Pressure = in. w.c. Throw = ft. at 50, 100, and 150 FPM terminal velocity 3. Noice Criteria is based on 10 dB room absorption (Re: 1012 watts) evaluated at 125 through 4000 Hz octave bands. 4. Throw data are based on a horizontal discharge in one direction only.
PAGE 101
Engineering Data SV and SVH Spiral Diffusers USV, USVH Universal Spiral Diffusers (Page 38) See page 39 for min. duct diameter. 600 .066 84 10-6 108 11-8 126 12-8 150 13-9 234 17-11 312 19-13 20 378 21-14 20 396 22-15 21 426 23-15 21 528 25-17 22 588 26-18 23 666 28-19 23 810 31-21 24 894 32-22 24 1092 36-25 25 1374 41-28 26 1650 44-30 27 700 .
PAGE 102
Engineering Data L Series (Page 40-42) Engineering Data NOTES: 1. Table 1 based on up to 4-foot grille length. For longer lengths, correct throw and NC per Table 2. 2. When using continuous grille lengths with alternate active and inactive sections, a reduction in throw can be obtained by omitting the factors contained in Table 2. 3. Bar style 30 and 0 Increase Table 1 NC + 5 NC 4. Supply air temperature effect on horizontal throw is shown in Table 3.
PAGE 103
Engineering Data L Series (Page 40-42) Table 2 - Continuous Grille Length Factors Table 5 - Supply Grille Areas (per foot of length) Modify Table 1 by listed values for grille lengths above 4 feet. Grille Length in Feet NC +0 +5 +10 An 2 .17 2½ .21 3 .25 4 .33 5 .42 Listed Width in Inches 6 8 10 12 14 16 18 20 24 30 36 .50 .67 .84 1.00 1.20 1.30 1.50 1.70 2.00 2.50 3.00 Ak .04 .06 .09 .11 .16 .20 00 and 15 Bar Styles .25 .35 .45 .55 .68 .79 .90 1.00 1.30 1.60 2.10 Ak .03 .05 .08 .
PAGE 104
Throw (T) in Feet CFM/Ft of total Slot length Number of Slots Min. P s Outlet Velocity (V k ) FPM Ceiling Sidewall Sill Minimum Ceiling Height in Feet Min.-Max. Min.-Max. Min.-Max. @ -18F T @ -25F T NC in H 2 O 1 .02 500 5-7 3-5 1-2 <20 7½ 9 2 <.01 335 4-6 2-4 1-2 <20 1 .08 1000 10-13 8-11 1-3 20 20 2 .02 670 8-11 6-9 2-3 8 9 <20 3 .01 400 6-9 4-7 1-2 <20 1 .08 1500 11-16 10-14 4-6 25 2 .05 1000 10-14 8-12 3-4 20 30 9 10 3 .02 600 8-11 6-9 2-3 <20 4 .
PAGE 105
180 200 10 8 9 10 9 10 .05 .10 .08 .07 .10 .08 940 1280 1200 1060 1335 1175 Engineering Data 19-28 24-35 23-34 22-32 25-39 24-37 17-25 21-31 20-30 19-29 22-35 21-33 8-17 12-22 11-21 10-20 - 12 15 12 15 20 30 25 25 30 25 S Series (Page 43-47) 500 600 700 .02 .02 .03 Outlet Velocity (Vk ) FPM 800 900 1000 1200 1400 1600 18 Total Pressure (P t ) inches H2 O .04 .05 .06 .09 .12 .
PAGE 106
180 6 7 8 9 10 6 7 8 9 10 8 9 (Page 10 .09 .07 .05 .04 .03 .11 .08 .06 .05 .04 .10 .07 43-47) .
PAGE 107
Engineering Data S Series (Page 43-47) Type 50 Supply Diffuser Areas per Foot of Length Ak Area An Area 1 .02 .08 2 .03 .17 3 .05 .25 4 .07 .33 No. of Slots 5 6 .09 .10 .42 .50 7 .12 .58 8 .14 .67 9 .15 .75 10 .17 .84 8 .19 .96 9 .21 1.10 10 .23 1.20 8 .24 1.33 9 .27 1.50 10 .30 1.67 Type 75 Supply Diffuser Areas per Foot of Length Ak Area An Area 1 .03 .12 2 .05 .24 3 .07 .36 4 .09 .48 No. of Slots 5 6 .12 .14 .60 .72 7 .16 .
PAGE 108
Engineering Data DL Drum Louver (Page 48) 6-Inch Outlet* Velocity 800 1000 Static Pressure .007 .010 (Ft2) Total Pressure .039 .065 CFM 128 160 .375 .16 6x9 Throw 6-7-13 8-11-14 CFM 168 210 .500 .21 6 x 12 Throw 8-10-18 10-15-24 CFM 256 320 .750 .32 6 x 18 2100 Throw 10-14-23 13-18-30 .052 CFM 328 410 1.000 .41 6 x 24 .330 Throw 12-17-28 16-21-35 336 CFM 416 520 6 x 30 .52 1.250 17-23-35 Throw 15-20-33 18-24-39 441 CFM 496 620 6 x 36 .62 1.500 18-23-41 Throw 17-23-37 20-26-43 672 CFM 664 830 2.000 6 x 48 .
PAGE 109
1800 .040 .254 1080 2-64 1350 6-73 1620 0-81 1890 4-89 2160 9-96 2700 -100 3330 -118 3870 -135 DL Drum Louver (Page 48-51) 12-Inch Outlet* Velocity 800 1000 Static Pressure .007 .010 (Ft2) Total Pressure .039 .065 CFM 560 700 12 x 20 .70 1.670 Throw 10-20-35 18-25-43 CFM 840 1050 12 x 30 1.05 2.500 Throw 17-25-42 24-32-53 CFM 1120 1400 12 x 40 1.40 3.330 2100 Throw 20-28-49 27-36-62 .052 CFM 1400 1750 12 x 50 1.75 4.160 .330 Throw 22-29-56 29-39-71 336 CFM 1720 2150 12 x 60 2.15 5.
PAGE 110
Engineering Data Stationary Louvers 245ZC, 245ZF (Page 51) 1530ZC, 1530ZF (Page 50) 36 1.19 36 1.96 1.19 2.72 1.96 3.48 2.72 4.24 5.00 3.48 5.77 4.24 6.53 5.00 7.29 5.77 8.05 6.53 8.81 7.29 9.58 8.05 36 10.34 8.81 1.19 11.10 9.58 1.96 10.34 2.72 11.10 3.48 4.24 5.00 5.77 6.53 36 7.29 0.96 8.05 1.61 8.81 36 2.26 9.58 0.96 2.92 10.34 1.61 11.10 3.57 2.26 4.22 2.92 4.87 3.57 5.52 4.22 6.17 4.87 6.82 5.52 7.47 6.17 36 8.12 6.82 0.96 8.78 7.47 1.61 9.43 8.12 2.26 8.78 2.92 9.43 3.57 4.22 4.87 5.52 6.17 36 6.
PAGE 111
Engineering Data RZSRT Diffuser (Page 61) 6" 10" 12" 14" 500 98 .005 .024 175 .014 .030 273 .014 .029 393 .022 .038 535 .023 .037 - 600 118 .006 .034 209 .021 .043 327 .021 .042 471 .032 .054 641 .033 .053 - Neck Velocity FPM 700 800 900 1000 1200 1400 1600 137 157 177 196 236 275 314 .008 .011 .013 .016 .023 .031 .041 .046 .060 .076 .094 .134 .183 .238 15 22 26 31 244 279 314 349 419 489 559 .028 .037 .046 .057 .082 .111 .145 .058 .076 .096 .118 .170 .231 .
PAGE 112
Engineering Data RZMCDST Diffuser (Page 61) Engineering Data Throw Data - Terminal Velocity of 75 FPM S 400 79 3.5 4.5 0.9 1.2 0.6 500 98 4.4 5.6 1.1 1.5 0.8 600 118 5.3 6.8 1.3 1.8 0.9 700 137 6.2 7.9 1.5 2.1 1.1 800 157 7.1 9.0 1.7 2.5 1.2 900 1000 1200 1400 1600 177 196 236 275 314 7.9 8.8 10.6 12.4 14.1 10.2 11.3 13.6 15.8 18.1 2.0 2.2 2.6 3.0 3.5 2.8 3.1 3.7 4.3 4.9 1.4 1.5 1.8 2.1 2.5 Neck Velocity CFM 1-direction 2-direction 6" 3-direction Short 3-direction Long 4-direction 400 79 1.5 1.
PAGE 113
Engineering Data RZ500 Square Ceiling Diffuser (Page 62) RZ505 (two-way corner) 300 60 0.002 2.5 2.5 1.5 82 0.009 4.0 3.5 2.5 105 0.016 5.0 4.5 3.0 400 80 0.004 3.5 3.0 2.0 109 0.016 5.0 4.5 3.0 140 0.029 6.5 6.0 4.0 500 100 0.006 4.0 4.0 2.5 136 0.025 6.0 5.5 4.0 175 0.045 8.0 7.5 5.0 600 120 0.008 5.0 4.5 3.0 164 0.037 7.5 7.0 4.5 209 0.065 9.5 9.0 6.0 700 135 0.011 6.0 5.5 3.5 191 0.050 8.5 8.0 5.5 244 0.088 11.0 10.5 7.0 300 60 0.002 2.0 2.5 2.0 2.5 1.5 1.5 80 0.009 2.5 4.0 2.5 3.5 1.8 2.5 105 0.
PAGE 114
Engineering Data 441 & 445 (Page 59) Engineering Data 659T/659TI/PFT/PFTI Series Performance (Page 53, 56) Average Face Velocity 659T CFM Ak 2.440 -Ps PFT CFM Ak 2.740 -Ps 659-TI w/12" collar CFM Ak 2.230 -Ps w/14" collar CFM Ak 2.260 -Ps w/16" collar CFM Ak 2.320 -Ps PFTI w/12" collar CFM Ak 2.320 -Ps w/14" collar CFM Ak 2.590 -Ps w/16" collar CFM Ak 2.630 -Ps Neck Velocity CFM 6" Diameter Ps NC Ak .370 441 Throw Ak .430 445 Throw CFM 8" Diameter Ps NC Ak .450 441 Throw 445 Throw Ak .
PAGE 115
Engineering Data DPD, DPD R6 (Page 62, 66) Model DPD/DPD R6 T-Bar Plate Diffuser 900 1000 1200 175 195 235 .030 .037 .054 20 25 30 3.5 4.0 4.5 315 350 420 .0491000 .060 900 1100.086 18030 200 30220 35 .054 .066 5.5 6.0.080 7.0 32 490 36545 38655 5.0 .068 5.0 .084 6.0.122 31030 350 35385 40 .054 .068 .083 10.5 11.5 14.5 30 34 38 705 8.0785 8.5945 7.0 .072 .094 490 550 600.132 .05635 .068 35.082 40 13.0 14.5 4217.5 36 39 7.0 960 8.0 1070 9.0 1280 700 .115 780 .140870.205 .08035 .100 40.125 45 34 37 15.5 17.
PAGE 116
Engineering Data Probe Position: The probe is held 1 inch in from the outer edge of the diffuser, flush with the face. Engineering Data PROBE POSITION 1 2 3 4 Four-Way (Short Throw) • For throw in all four directions, use short throw data. Three-Way (Short Throw) • For throw in all three directions, use short throw data. 1 2 3 4 Three-Way (Long & Short) • For throw in the #2 & #4 direction use long throw data. 1 2 3 4 • For throw in the #1 & #3 directions, use short throw data.
PAGE 117
Engineering Data CBPS Supply (Page 64) One-Way Supply 300 60 .060 2.5-4.0-5.0 <20 105 .080 4.0-6.0-7.0 <20 165 .080 4.5-7.0-8.5 <20 235 .080 5.5-8.5-10.0 <20 325 .110 4.5-7.0-8.5 <20 420 .020 5.0-8.0-10.0 <20 400 80 .080 3.5-5.0-6.0 <20 140 .110 5.5-8.0-9.5 <20 220 .110 6.5-9.5-11.5 <20 315 .110 7.5-11.0-13.5 20 430 .140 6.5-9.5-11.5 20 560 .040 7.0-10.0-12.0 <20 500 100 .100 4.0-6.0-7.0 <20 175 .160 6.5-10.0-12.0 21 275 .170 8.0-12.0-14.5 23 395 .170 9.5-14.0-17.0 25 535 .210 8.0-12.0-14.5 25 700 .
PAGE 118
Ps 10" Throw NC CFM Ps 12" Throw NC CFM Ps 14" Throw NC CFM Ps 16' Throw CBPSNCSupply .030 .040 4.5-6.5-8.0 5.5-8.5-10.5 <20 <20 235 315 .020 .030 4.5-6.5-8.0 5.5-8.5-10.0 <20 <20 325 430 .020 .030 4.0-5.0-7.0 5.5-8.0-9.5 <20 <20 420 560 .020 .040 5.0-6.0-8.0 6.0-9.0-10.0 <20 (Page<20 64) .060 7.0-10.5-12.5 <20 395 .050 7.0-10.5-12.5 21 535 .050 6.0-9.0-11.0 20 700 .060 7.0-9.0-12.0 26 Engineering Data .090 8.5-12.5-15.0 21 470 .070 8.5-12.5-15.0 27 640 .070 8.0-12.0-14.5 25 840 .080 9.0-13.0-15.0 34 .
PAGE 119
Engineering Data Screw Hole Location Chart 92 Series, 94 Series, 98 Series (Pages 37-41) 821, 831 (Page 36) Engineering Data 117
PAGE 120
Engineering Data Engineering Data Screw Hole Chart for Extruded Aluminum Line V Series, H Series, C Series, RH Series 118
PAGE 121
Engineering Data 821, 831, 92 Series, 98VOH, H and V Series Drop Chart, Use with size selection charts Instructions for use of Drop Chart Example: The drop for a 92 Series register “C” deflection 16x5 size has an 800 fpm velocity and a 16 foot throw. Connect these two points on the chart and read the drops as follows: Engineering Data The drop of the air stream is determined by using the throw and velocity of the register selected. On the drop chart, lay a straight edge connecting these values.
PAGE 122
Engineering Data 92 Series, H and V Series Alternate Sizing Graph Grille Width in Inches Engineering Data Method of Determining Alternate Grille Sizes Extensive tests indicate that by varying dimensions of a grille there is no appreciable effect on the air throw, provided the same area is maintained. To change the dimensions of a grille, place a straight edge across the width and height scales on dimensions as selected from charts.
PAGE 123
Suggested Specifications Surfaire® T-Bar Diffusers Back panel shall be formed galvanized steel covered with glass fiber insulation and an aluminum foil vapor barrier. Insulation is held securely in place by face margin edge fold over. Insulation will be prescored to accept specified collar sizes. 5400 Series collars will be supplied providing efficient, tight attachment with bayonet fasteners to mating prepunched holes in back panel. Collars will provide flex duct locking tabs and damper mounting slots.
PAGE 124
Glossary of Terms Ceiling or Wall Effect The tendency of an air stream moving along a wall or ceiling surface to remain in contact with that surface. Glossary of Terms Engineering Data Core Area The total plane area of that portion of a grille, face, or register bounded by a line tangent to the outer opening through which air can pass. The core area is less than the register size. Example, a 14-in. x 8-in. register may have a core that is 1 in. less than the listed size; so, the core area is 13in. x 7in.
PAGE 125
Alpha-Numeric Index Engineering Data Steel—Panel Extruded Aluminum Face.............................................................70 Damper...............................................................................................................73 Square Two-Core Face Adj. Collar with molded R6 Insulation..........................62....................... 113 Aluminum Plaster Frame....................................................................................74 Control Grid.....................
PAGE 126
Alpha-Numeric Index Alpha-Numeric Index Product Information 124 Engineering Data Molded Fiberglass Back Features....................................................................................................54 P Panel Filler Panel..........................................................................................................73 PD Perforated Face Only..........................................................................................67.......................
PAGE 127
Alpha-Numeric Index Product Information Engineering Data Recommended Noise Criteria and Face Velocity Ranges are on page 75 Alpha-Numeric Index SS Linear Face Diffuser............................................................................................39......................... 97 SV Single-Deflection Diffuser...................................................................................38......................... 99 SVH Double-Deflection Diffuser.............................................
PAGE 128
Hart & Cooley Inc 5030 Corporate Exchange Blvd. SE Grand Rapids, MI 49512 P (800) 433-6341 F (800) 223-8461 hartandcooley.com Offered by, ©2013 Hart & Cooley, Inc. Form No.