User's Manual

Watching DVD (Progressive)

OWNER'S MANUAL

Turn on the DVD player or Settop Box.

Press TV / Video button on the remote control of the monitor to

select Component. (Select "DTV YPbPr")

How to use

(When the Interface board is installed.)

• Connect normal 480i, DVD source, through normal YPbPr of Componect signal only.

• No Signal

"No Signal" on display will disappear after 5 minutes, then the TV will go in to Sleep Mode (dark).

• Normal DVD source is based on 480i, which should be through normal YPbPr of Component signal.

DVD/HDTV Watching through RGB Input for Progressive(480p, 720p, 1080i)

mode(YPbPr)