User's Manual

Watching VCR
27
OWNER'S MANUAL
Press TV/ Video button on the Remote Control and select Video Sources. (When connection with S-Video,
select the S-Video.)
Insert a video tape into the VCR and press the PLAY button on the VCR.
1
2
• No Signal
"No Signal" on display will disappear after 5 minutes, then the TV will go in to Sleep Mode (dark).
< To avoid picture noise (interference), leave an adequate distance (over 3m) between the VCR and monitor. >
When connecting the Plasma Monitor with external equipment, match the colors of connecting ports (Video -
yellow, Audio(L) - white, Audio(R) - red).
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma
Monitor.
If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting
a regular VCR to the Video input.
Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a
VCR 4:3 picture format or if a CH label is present.
To watch VCR (When the Interface board is installed.)