User's Manual

TV SET-UP

OWNER'S MANUAL

MODE

Select "Air" or "Cable". If your TV set is connected antenna, select "AIR", If you TV set is connected to

the CABLE TV, select "CABLE"

AUTO CHANNEL

If you select "AUTO CHANNEL" , TV set will automatically scan available channel and add to permanent

channel list. If you want to "exit" auto channel scan, press exit key on IR Remote Control.

FINE TUNE

You can manually adjust the tuning precision by using this function.

MTS

Select the audio mode on TV broadcasting. "AUTO", "STEREO", "MONO", "L1" and "L2" can be selected.

If you select "AUTO", the "TV" set will select stereo mode if the channel broadcast in stereo mode, mono

mode otherwise. If you want to set sound mode as "MONO", the set will sounds as mono mode even if the

channel broadcasts with stereo mode. If the channel is broadcasting in Bi-lingual mode and if you want to

listen to secondary language, you should select "L2". The TV set will sounds with default language otherwise.